ページ1に含まれる内容の要旨
PT1945R / PT1945RW / PT1945S
Touch Screen LCD Monitor
USER’S GUIDE
www.planartouch.com
ページ2に含まれる内容の要旨
The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be reproduced,translated to another language or stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission. Windows is a registered trademark of Microsoft, Inc. Other brand or product names
ページ3に含まれる内容の要旨
Table of Contents Usage Notice Precautions ............................................................................................................................ 1 Introduction About PT1945R/PT1945RW/PT1945S ................................................................................. 2 Touch Screen for PT1945R/PT1945RW/PT1945S .. ....................................................... 2 Package Overview ...........................................................................
ページ4に含まれる内容の要旨
Usage Notice ! Warning - To prevent the risk of fi re or shock hazards, do not expose this product to rain or moisture. ! Warning - Please do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. Do: • Turn off the product before cleaning. • Tou
ページ5に含まれる内容の要旨
Introduction About PT1945R/PT1945RW/PT1945S The PT1945R/PT1945RW/PT1945S is a 19" fl at panel screen with an active matrix, thin-fi lm transistor (TFT) liquid crystal display (LCD). Features include: • Direct Analog signal input • Active matrix TFT LCD technology • PT1945R/S - 1280 x 1024 SXGA resolution • PT1945RW -1366 x 768 WXGA resolution • 19" viewable display area • PT1945R/S - 31.47 ~ 80 KHz horizontal scan • PT1945RW - 31.47 ~ 60.02 KHz horizontal scan • 56 ~ 75 Hz high refresh ra
ページ6に含まれる内容の要旨
xxxxxxxxx / xxxxxxxxx xxxxxxxxx USER’S GUIDE www.planartouch.com Package Overview LCD Display Power Cord VGA Signal Cable Audio-in Cable USB Cable ( A to B) RS-232 Cable DC Power Supply Touch Screen Driver Landing Strip (for PT1945RW only) Installation CD-ROM User’s Guide Screw 3
ページ7に含まれる内容の要旨
Installation Product Overview • Front View PT1945R/PT1945S PT1945RW • PT1945R/PT1945S Bottom View AUDIO AC IN RS-232 VGA USB POWER SWITCH • PT1945RW Bottom View RS-232 DC IN VGA AUDIO USB EARPHONE POWER SWITCH 4
ページ8に含まれる内容の要旨
Start Your Installation Please follow these instructions so that you can hookup the cables to associated connector. 1. Lay the LCD fl at on an even surface. 2. Move the stand into position as seen in the step 2 diagram. 3. Remove the cable cover as seen in the step 3 diagram. 4. Connect the cables to the appropriate connectors as seen in the step 4 diagram. Use step 4-1 diagram if using the RS-232 serial connector. Use the step 4-2 diagram if using the USB connector. 5. Position al
ページ9に含まれる内容の要旨
PT1945RW Step 2 Step Step 2 2 S Step 3 tep 3 Step 4-1 Step 4-2 Step 4-2 Power RS-232 Power USB VGA VGA Audio Audio Step 5 6
ページ10に含まれる内容の要旨
Connecting the Display (Figure 8.1) To setup this display, please refer to the following fi gure and procedures. 1. Be sure all equipment is turned off. 2. Connect the AC power cord to the power connector on the monitor and the other end into an electrical outlet (8.1). 3. Connect the D-SUB cable from the display's VGA input connector to the D-SUB connector of your host computer and tighten the screws (8.1). 4. Connector the audio-in cable from the audio input port of your displa
ページ11に含まれる内容の要旨
(Figure 8.1) PT1945R/PT1945S PT1945RW 8
ページ12に含まれる内容の要旨
Kensington Security Slot The monitor can be secured to your desk or any other fi xed object with Kensington lock security products. The Kensington lock is not included. PT1945R/PT1945S PT1945RW 9
ページ13に含まれる内容の要旨
VESA Mount Your Monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface standard which defi nes a physical mounting interface for fl at panel monitors, and corresponding with the standards of fl at panel monitor mounting devices, such as wall and table arms. The VESA mounting interface is located on the back of your monitor. To mount the monitor on an UL-listed certifi ed swing arm or other mounting fi xture, follow the instructions included with the mounting fi x
ページ14に含まれる内容の要旨
Remove the Deskstand PT1945R/PT1945S Remove 4 screws and then remove hinge. PT1945RW Remove 4 screws and then remove hinge. 11
ページ15に含まれる内容の要旨
User Controls Side Panel Controls PT1945R/PT1945S Icon key Name Menu Up Down Enter Power PT1945RW Icon key Name Menu Up Down Enter Power OSD Menu off status Menu on status Key Menu appear Menu disappear/ return to main item Brightness Main item select up/ Adjust up Mute Main item select down/ Adjust down Enter/Select sub-item function Power On/Off 12
ページ16に含まれる内容の要旨
How to Use the OSD Menus Icon Key Name Menu Up Down Enter Power 1. Press the “MENU” button to pop up the “on-screen menu” and press “Up” or “Down” button to select among the six functions in the main menu. 2. Choose the adjustment items by pressing the “Enter ” button. 3. Adjust the value of the adjustment items by pressing the “Up” or “Down” button. 4. With the OSD menu on screen, press “ Menu” button to return main menu or exit OSD. 5. The OSD menu will automatically close, if you have
ページ17に含まれる内容の要旨
On-Screen Display Menus Main OSD Menu: ITEM CONTENT Contrast The monitor luminance level control. Brightness The monitor backlight level control. Auto Adjust Fine-tune the image to full screen automatically. Left/Right Moving screen image horizontal position to left or right. Up/Down Moving screen image vertical position to up or down. Horizontal size The screen image horizontal dot clock adjustment. Fine The screen image pixel phase adjustment. OSD Left/Right Moving OSD menu horizontal positio
ページ18に含まれる内容の要旨
Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. ► Check that all the I/O and power connectors are correctly and well connected as described in the "Installation" section. ► Make sure the pins of the connectors are not crooked or broken. Problem: Partial Image or incorrectly displayed
ページ19に含まれる内容の要旨
Warning Signal If you see warning messages on your LCD screen, this means that the LCD display cannot receive a clean signal from the computer graphics card. Below are the three kinds of Warning Signal. Please check the cable connections or contact your local dealer or Planar for more information. No Signal This message means that the LCD display has been powered on but it cannot receive any signal from the computer graphics card. Check all the power switches, power cables, and VGA signal ca
ページ20に含まれる内容の要旨
Product Dimensions PT1945R/PT1945S 431.8 mm Front View 67.0 mm Side View 249.6 mm Top View 17 212.0 mm 219.0 mm 358.0 mm 390.9 mm
