ページ1に含まれる内容の要旨
KRC-435(K) Cover 01.11.26 4:46 PM Page 1
CASSETTE RECEIVER
KRC-435
INSTRUCTION MANUAL
AMPLI-TUNER-LECTEUR DE CASSETTE
MODE D’EMPLOI
RADIO CASSETTE
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the
best performance from your new cassette-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on
the warranty card, and in the space pro
ページ2に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 2 Contents Safety precautions......................3 Cassette player features...........12 Menu system.............................17 Playing Cassette Tapes Menu System About Cassette tape...................4 Fast Forwarding and Rewinding Security Code General features .........................5 Dolby B NR Touch Sensor Tone Power Selecting the Tape type Manual Clock Adjustment Selecting the Source Tape Advance DSI (Disabled System Indicator) Volume Blank Sk
ページ3に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 3 Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION About the disc changer/CD player to To prevent injury or fire, take the To prevent damage to the machine, be connected: following precautions: take the following precautions: To connect a disc changer having the "O-N" • Insert the unit all the way in until it is fully • Make sure to ground the unit to a negative switch to this unit, set the "O-N" switch to "N". locked in place. Otherwise it may fa
ページ4に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 4 Safety precautions About Cassette tape Cleaning the Faceplate Terminals Cleaning the tape head NOTE If the terminals on the unit or faceplate get When there’s noise or the sound quality is bad • If you experience problems during dirty, wipe them with a dry, soft cloth. during tape play the tape head maybe dirty, installation, consult your Kenwood dealer. clean the tape head. • If the unit does not seem to be working Cleaning the Unit right, try pressing
ページ5に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 5 General features Power SRC/ Release button u PWR OFF FM Turning ON the Power Press the [SRC] button. OFF DAB When the power is ON, the (page 18) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power B NR SCAN B.S./RDM REP MTL/M.RDM DISP NAME AUTO AME Press the [SRC] button for at least 1 second. LOUD d4¢ ATT/ Q/ AM DISP/ NAME LOUD AUD Selecting the Source Press the [SRC] button. Source required Display ATT indicator SYSTEM Q indi
ページ6に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 6 General features 1 Select the source to set Volume Press the [SRC] button. Increasing Volume 2 Select the Sound type Press the [u] button. Press the [Q] button. Decreasing Volume Each time the button is pressed the sound setting switches. Press the [d] button. Sound setting Display Flat "FLAT" User memory "USER" Rock "ROCK" Pops "POPS" Attenuator Easy "EASY" Turning the volume down quickly. Top 40 "TOP40" Jazz "JAZZ" Press the [ATT] button. Each time the
ページ7に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 7 Press the [4] or [¢] button. For 5 & 4 in. speaker "SP 5/4" For 6 & 6x9 in. speaker "SP 6*9/6" Adjustment Item Display Range For the OEM speaker "SP OEM" Bass level "BAS" –8 — +8 Middle level "MID" –8 — +8 4 Exit Speaker Setting mode Treble level "TRE" –8 — +8 Press the [Q] button. Balance "BAL" Left 15 — Right 15 Fader "FAD" Rear 15 — Front 15 Volume offset "V-OFF" –8 — ±0 Volume offset: Each source's volume can be set as a difference from the basic volu
ページ8に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 8 General features Switching Display Station/Disc Naming (SNPS/DNPS) Switching the information displayed. Attaching a title to a Station or CD. Press the [DISP] button. 1 Receive/play the station/disc you want to attach a title to Each time the button is pressed the display switches as shown • A title can't be attached to a MD. below. • Disc Naming can't be done during CD text or clock display. In Tuner source 2 Enter name set mode Information Display Pres
ページ9に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 9 used to name it. Auxiliary Input Display Setting Selecting the display when this device is switched to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX" display. 2 Enter Auxiliary input display setting mode Press the [DISP] button for at least 2 seconds. The presently selected AUX Name is blinks. 3 Select the Auxiliary input display Press the [4] or [¢] button. Each time the button is pressed it switches thro
ページ10に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 10 General features Tuner features Theft Deterrent Faceplate SRC FM The faceplate of the unit can be detached and taken with you, helping to deter theft. OFF DAB Removing the Faceplate 1 Press the Release button. Drop open the faceplate. B NR SCAN B.S./RDM REP MTL/M.RDM DISP NAME AUTO AME 2 Drawing the faceplate to left side pull it to the front and LOUD remove it. 4¢ AM # 1-6 AUTO/ AME ST indicator Frequency display Preset station number • The faceplate i
ページ11に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 11 Tuning Mode Direct Access Tuning (Function of remote) Choose the tuning mode. Entering the frequency and tuning. Press the [AUTO] button. 1 Select the band Each time the button is pressed the Tuning mode switches as Press the [FM] or [AM] button. shown below. 2 Enter Direct Access Tuning mode Tuning mode Display Operation Press the [DIRECT] button on the remote. Auto seek "AUTO 1" Automatic search for a station. "– – – –" is displayed. Preset station "AU
ページ12に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 12 Tuner features Cassette player features Auto Memory Entry Release button SRC FM PROG Putting stations with good reception in the memory automatically. OFF DAB 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry B NR SCAN B.S./RDM REP MTL/M.RDM DISP NAME AUTO AME Press the [AME] button for at least 2 seconds. LOUD When 6 stations that can be received are put in the memory Auto Memory Entry closes. 4¢ AM B NR B.
ページ13に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 13 Playing Cassette Tapes When there's no Cassette Tape inserted 1 Drop open the faceplate Press the Release button. 2 Insert a Cassette Tape. 3 Press the faceplate on the right side, and return it to its former position. 3 Press the faceplate on the right side, and return it to its • When the faceplate has been dropped open, it might interfere former position. with the shift lever or something else. If this happens, pay attention to safety and move the shi
ページ14に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 14 Cassette player features External disc control features Tape Advance SRC FM 38 Skipping to the next song or the start of the current song. Skipping to the next song OFF DAB Press the [¢] button. Skips to the start of the current song Press the [4] button. B NR SCAN B.S./RDM REP MTL/M.RDM DISP NAME AUTO AME LOUD 4¢ AM SCAN RDM REP M.RDM DISP/ Blank Skip NAME Fast forwarding automatically when an unrecorded portion continues for at least 10 seconds. Track
ページ15に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 15 Playing External Disc Track Search Playing discs set in the optional accessory disc player connected Selecting the song you want to hear. to this unit. Press the [4] or [¢] button. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD" CD player "DISC-CH" CD changer/ MD changer Album Search (Function of disc changer) Pause and play Selecting the disc you want to hear. Press the [38] button. Pre
ページ16に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 16 External disc control features 1 Start Track Scan Direct Album Search Press the [SCAN] button. (Function of disc changers with remote) "SCAN ON" is displayed. Doing Disc Search by entering the disc number. 2 Release it when the song you want to listen to is played 1 Enter the disc number Press the [SCAN] button. Press the number buttons on the remote. 2 Do Album Search Press the [DISC+] or [DISC–] button. Canceling Direct Album Search Press the [38] but
ページ17に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 17 Menu system When the [¢] button is pressed, the next song select starts. MENU SRC FM OFF DAB B NR SCAN B.S./RDM REP MTL/M.RDM DISP NAME AUTO AME Text/Title Scroll Scrolling the displayed CD text or MD title. LOUD Press the [DISP] button for at least 1 second. 4¢ AM DNPP (Disc Name Preset Play) (Function of disc changers with remote) Selecting the CD displayed in the DNPS of the CDs set in the Disc changer. 1 Enter DNPP mode Press the [DNPP] button on t
ページ18に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 18 Menu system removed from the vehicle, personalizing this unit is by using the Menu System Security Code is a help in preventing theft. Setting during operation beep sound etc. functions. When the Security Code function is activated, the code can't be The Menu system basic operation method is explained here. The changed and the function can't be released. reference for the Menu items and their setting content is after Note, the Security Code can be set as
ページ19に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 19 Press the [MENU] button. 1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter the Security Code. "APPROVED" is displayed. The unit can be used. DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is Touch Sensor Tone removed, warning potential thieves. Setting the operation check sound (beep sound) ON/OFF. Display Setting Display Setting "DSI ON" LED flashes. "BEEP ON" Beep is heard. "DSI OFF" LED OFF
ページ20に含まれる内容の要旨
KRC435_U.S_r3 01.11.27 7:18 PM Page 20 Menu system Basic Operations of remote CRSC (Clean Reception System Circuit) Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. 4/¢ Display Setting "CRSC ON" The CRSC is ON. FM/AM/DISC+/DISC– 38 "CRSC OFF" The CRSC is OFF. Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF. [#0] —
