Tamarack Technologies HV1450の取扱説明書

ページ1に含まれる内容の要旨

HV1450 EVERGREEN
WHOLE hoUSE COMFORT VENTILATOR
PRODUCT MANUAL & INSTALLATION GUIDE
Please note the serial number, date of purchase, and the
point of purchase below for handy reference. The serial
number is located on a label affixed to the HV1450 next
to the junction/utility box.
Serial Number
Date of Purchase
Point of Purchase
One (1) Whole House Comfort Ventilator Four (4) Hex Standoffs
Unpacking your HV1450:
Four (4) Flat Washers
One (1) Damper
When you have unpacked
Four (4) Philips H

ページ2に含まれる内容の要旨

Installation Tools and supplies needed (Not Included): You will need the following items: two pieces of 2x stock to match your existing framing, a saw to cut the hole in the ceiling, a hammer or screw gun to attach the blocking to the existing joists, a Phillips head screw driver to attach the grille, weather strip material and low expansion spray foam sealant. 1. Cut a hole in the ceiling under where the HV1450 will be installed. Suggested methods for making the proper sized hole in the ceili