ページ1に含まれる内容の要旨
3-865-912-11 (1)
FM/AM
Compact Disc
Player
US
Operating Instructions
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this
product.
Model No. CDX-C6850␣ ␣ Serial No.
For installation and connections, see the supplied installation/connections
manual.
CDX-C6850
ª 1999 by Sony Corporation
ページ2に含まれる内容の要旨
Warning Welcome ! This equipment has been tested and found to Thank you for purchasing the Sony Compact comply with the limits for a Class B digital Disc Player. This unit lets you enjoy a variety device, pursuant to Part 15 of the FCC Rules. of features as well as an optional rotary These limits are designed to provide commander or a wireless remote. reasonable protection against harmful interference in a residential installation. This In addition to the CD playback and radio equipment generate
ページ3に含まれる内容の要旨
Table of Contents This Unit Only With Optional Equipment Location of controls ................................................. 4 CD/MD Unit Playing a CD or MD ......................................... 17 Playing tracks repeatedly Getting Started — Repeat Play ............................................. 18 Resetting the unit ................................................ 6 Playing tracks in random order Detaching the front panel .................................. 6 — Shuffle Play ...........
ページ4に含まれる内容の要旨
Location of controls OPEN SOUND MODE DSPL LIST 1 OFF 2 3 D - BASS SOURCE OFF SHIFT SEEK/AMS 1 23456789 10 CDX-C6850 Refer to the pages for details. 1 SEEK/AMS (seek/Automatic Music !¼ LIST button Sensor/manual search) control Station Memo 11, 22, 23 8, 10, 18, 20, 21 Disc Memo 19 2 MODE (band/unit select) button List-up 12, 20 9, 10, 17, 19, 21 !Á Reset button (located on the front side 3 6 (eject) button (located on the front of the unit behind the front panel) 6 side of the unit behind the
ページ5に含まれる内容の要旨
Optional wireless remote (RM-X47) MODE SOURCE OFF DIR SEEK AMS – PRESET + REW DISC FF – SOUND SEL ATT DSPL The corresponding buttons of the wireless remote control the same functions as those on this unit. 6 DSPL button 1 OFF button 7 PRESET/DISC button 2 SEEK/AMS button You cannot perform manual search or manual 3 (Ð) (+) buttons tuning with the wireless remote. 4 ATT button 8 SOURCE button 5 SOUND/SEL button 9 MODE/DIR button 5 +
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Setting the clock CD Player The clock uses a 12-hour digital indication. Example: To set the clock to 10:08 1 Press (SHIFT), then press (3) (SET UP) Listening to a CD repeatedly until “Clock” appears. 1 Press (OPEN) and insert the CD. Labeled side up 1 Press (5) (n). 6 The hour indication flashes. 2 Set the hour. to go backward 2 Close the front panel. Playback starts automatically. SOURCE to go forward If a CD is already inserted, press (SOURCE) repeatedly until “CD” appears to start playback.
ページ8に含まれる内容の要旨
Changing the display item 1 During playback, press (SHIFT). Each time you press (DSPL) during CD or CD TEXT disc playback, the item changes as 2 Press (3) (SET UP) repeatedly until follows: “A.Scrl” appears. $ 3 Press (5) (n) to select “A.Scrl on.” Track number/ Elapsed playback time $ 4 Press (SHIFT). 1 2 Disc name* /Artist name* $ To cancel Auto Scroll, select “A.Scrl off” in 1 Track name* step 3 above. $ Clock Note For some CD TEXT discs with very many characters, the following cases may happ
ページ9に含まれる内容の要旨
Playing a CD in various Radio modes You can play CDs in various modes: •Repeat (Repeat Play) repeats the current track. Memorizing stations •Shuf (Shuffle Play) plays all the tracks in random order. automatically — Best Tuning Memory (BTM) Playing tracks repeatedly — Repeat Play The unit selects the stations with the strongest signals and memorizes them in the order of 1 During playback, press (SHIFT). their frequencies. You can store up to 10 Every time you press (SHIFT), only the stations on e
ページ10に含まれる内容の要旨
Note If the automatic tuning stops too frequently, press Memorizing only the (SHIFT), then press (4) (PLAY MODE) repeatedly until “Local” (local seek mode) is displayed. Then desired stations press (5) (n) to select “Local on.” Press (SHIFT). Only the stations with relatively strong signals will You can preset up to 20 FM stations (10 each be tuned in. for FM1 and 2), up to 10 AM stations in the order of your choice. Tip If you know the frequency of the station you want to listen to push the SEE
ページ11に含まれる内容の要旨
2 Press (5) (n) after locating the desired Changing the display item character. Each time you press (DSPL), the item changes The flashing cursor moves to the next as follows: space. Frequency ÷ Clock After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. If you press (2) (N), the flashing cursor In the Motion Display mode, all the above moves to the left. items are scrolled in the display one by one in order. 3 Repeat steps 1 and
ページ12に含まれる内容の要旨
LIST MODE SOUND Locating a station by Other Functions name — List-up 1 Press (LIST) momentarily. You can connect an optional rotary The name assigned to the station currently commander (RM-X4S) with this unit. playing appears in the display. Labeling the rotary commander 2 Press (LIST) repeatedly until you find the desired station. Depending on how you mount the rotary commander, attach the appropriate label as shown in the illustration below. 3 Press (6) (ENTER) to tune in the desired station.
ページ13に含まれる内容の要旨
By rotating the control (the SEEK/ AMS control) Using the rotary commander The rotary commander works by pressing buttons and/or rotating controls. You can also control optional CD or MD units with the rotary commander. By pressing buttons (the SOURCE and MODE buttons) Rotate the control and release it to: •Locate a specific track on a disc. Rotate and hold the control until you locate the (SOURCE) specific point in a track, then release it to start playback. •Tune in stations automatically. Rot
ページ14に含まれる内容の要旨
Press (SOUND) to adjust the volume and sound menu. Adjusting the sound characteristics You can adjust the bass, treble, balance, and fader. You can store the bass and treble levels independently for each source. Press (LIST) to display the 1 Select the item you want to adjust by memorized names. pressing (SOUND) repeatedly. VOL (volume) n SUB (subwoofer volume) Changing the operative direction n BAS (bass) n TRE (treble) The operative direction of controls is factory- n BAL (left-right) n FAD (f
ページ15に含まれる内容の要旨
1 Press (SHIFT). Changing the sound and 2 Press (3) (SET UP) repeatedly until the display settings desired item appears. The following items can be set: Each time you press (3) (SET UP), the item •Clock (page 7). changes as follows: •D.Info (Dual Information) - to display the Clock n D.Info* n Amber/Green n Dimmer clock and the play mode at the same time n Contrast n Beep n RM n Loud* n HPF* (ON) or to display the information n LPF* n M.dspl n A.Scrl* alternately (OFF). * When no CD or MD is pla
ページ16に含まれる内容の要旨
Adjusting the frequency of the Adjusting the frequency of subwoofer(s) — Low Pass Filter (LPF) the speakers and the To match the characteristics of the connected subwoofer(s) subwoofer(s), you can cut out the unwanted high and middle frequency signals entering By setting the cut off level of unwanted the subwoofer(s). frequency signals, the speakers connected to 1 Press (SOURCE) to select a source (radio, the output terminal and/or the subwoofer(s) CD, or MD). connected to the sub out terminal w
ページ17に含まれる内容の要旨
ページ18に含まれる内容の要旨
Locating a specific track — Automatic Music Sensor (AMS) Playing tracks repeatedly — Repeat Play During playback, push the SEEK/AMS control up or down and release for each You can select: track you want to skip. •Repeat 1 - to repeat a track. To locate succeeding •Repeat 2 - to repeat a disc. tracks 1 During playback, press (SHIFT). To locate preceding tracks SEEK/AMS 2 Press (7) (REP) repeatedly until the desired setting appears. Locating a specific point in a track z Repeat 1 z Repeat 2
ページ19に含まれる内容の要旨
Displaying the disc memo Labeling a CD — Disc Memo Press (DSPL) during CD or CD TEXT disc (For a CD unit with the custom file function) playback. You can label each disc with a personalized name. You can enter up to eight characters for a disc. If you label a CD, you can locate the disc by name (page 20) and select the specific Each time you press (DSPL) during CD or tracks for playback (page 20). CD TEXT disc playback, the item changes as follows: 1 Play the CD and press (LIST) for two $ second
ページ20に含まれる内容の要旨
Locating a disc by name Selecting specific tracks — List-up (For a CD unit with the custom for playback file function or an MD unit) — Bank (For a CD unit with the custom file You can use this function for discs that have function) been assigned a custom name. For more If you label the disc, you can set the unit to information on disc names, refer to “Labeling a skip or play the tracks of your choice. CD” (page 19). 1 Press (LIST). 1 Start playing the disc and press (SHIFT), The name assigned to
