ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
VISIT OUR WEBSITE!
ページ3に含まれる内容の要旨
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
TABLE OF CONTENTS BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS INTRODUCTION OF THE OWNER’S MANUAL 1. HANDLING PRECAUTIONS ....................................................................................... 1 - 2 2. PRECAUTIONS CONCERNING INSTALLATION LOCATION ............................... 3 - 4 3. OPERATION .................................................................................................................. 5 - 8 4. NAME OF PARTS .........
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN Non-technical personnel who do not have technical knowledge and expertise should refrain from performing such work that this manual requires the location's main- tenance man or a serviceman to carry out, or work which is not explained in this WARNING! manual. Failing to comply with this instruction can cause a severe accident such as electric shock. Ensure that parts replacement, servicing & inspections, and troubleshooting are performed
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
1. HANDLING PRECAUTIONS When installing or inspecting the machine, be very careful of the following points and pay at- tention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cau- tionary matters herein stated can cause personal injury or damage to the machine. Before performing work, be sure to turn power off. Performing the work without turning power off can cause an electric shock or short ci
ページ10に含まれる内容の要旨
For the IC board circuit inspections, only the logic tester is allowed. The use STOP of a multiple-purpose tester is not permitted, so be careful in this regard. The Projector is employed for this machine. The Projector's screen is IMPORTANT! susceptible to damage, therefore, be very careful when cleaning the screen. For details, refer to PROJECTOR. Static electricity from your body may damage some electronics devices on the IC board. Before handling the IC board, touch a groun
ページ11に含まれる内容の要旨
2. PRECAUTIONS CONCERNING INSTALLATION LOCATION This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause a fire, electric shock, WARNING! injury and or malfunctioning. Places subject to rain or water leakage, or places subject to high humidity in the proximity of an indoor swimming pool and or shower, etc. Places subject to direct sunlight, or places subject to high temperatures in the proximity
ページ12に含まれる内容の要旨
Operation Area For the operation of this machine, secure a minimum area of 74.3 in. (W)×73 in. (D). In order to prevent injury resulting from the falling down accident during game play, be sure to secure the minimum area for opera- WARNING! tion. Be sure to provide sufficient space so as to allow this product's ventilation fan to function efficiently. To avoid machine malfunctioning and a fire, do not place any obstacles near the ventilation opening. SEGA shall not be held resp
ページ13に含まれる内容の要旨
3. OPERATION PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION To avoid injury and trouble, be sure to constantly give careful attention to the behavior and man- ner of the visitors and players. In order to avoid accidents, check the following before starting the operation: To ensure maximum safety for the players and the customers, ensure that WARNING! where the product is operated has sufficient lighting to allow any warnings to be read. Operation under insufficient lighting can c
ページ14に含まれる内容の要旨
Do not put any heavy item on this product. Placing any heavy item on the product can cause a falling down accident or parts damage. Do not climb on the product. Climbing on the product can cause falling down WARNING! accidents. To check the top portion of the product, use a step. To avoid electric shock, check to see if door & cover parts are damaged or omitted. To avoid electric shock, short circuit and or parts damage, do not put the fol- lowing items on or in the periphe
ページ15に含まれる内容の要旨
To avoid electric shock and short circuit, do not allow the customers to unplug the power plug without a justifiable reason. WARNING! This product is intended for 1 Player only per seat. Playing the game by 2 or more Players riding on the seat together can cause falling down and collision accidents by striking head, hand, or elbow. Caution lookers-on so as not to touch the operating unit while in play. Failure to observe this may cause bodily contact with the player and trou
ページ16に含まれる内容の要旨
PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION (CARD SYSTEM) When an unjust act is performed, no written data is backed up mechanically. STOP The following acts may be judged to be unjust acts. Since it also becomes a defect of operation and the cause of parts damage, caution IMPORTANT! the player not to perform the following acts. •Use of cards bent or deformed •Use of cards adhered seals or extraneous matter on •Use of a card mixed two sheets •Use of cards other than dedicated cards •
ページ17に含まれる内容の要旨
4. NAME OF PARTS FIG. 4 a OVERVIEW FIG. 4 b REAR VIEW TABLE 4 Dimensions and Weights Width x Length x Height Weight CABINET 1 44 in x 68 in x 71.75 in 865 LB CABINET 2 36.75 in x 68 in x 71.75 in 700 LB ASSY POP 30 in x 22 in x 14 in
ページ18に含まれる内容の要旨
5. ACCESSORIES When transporting the machine, make sure that the following parts are supplied. Magnetic cards for the recording of play results, and cleaning kits for cleaning the head of the card reader/writer are sold separately. Subsequent purchases of these items can be made by contacting the office listed on this Owner's Manual or the dealer from whom the product was originally pur- chased. Be sure to provide the part number(s), name(s), and required number of items. Cleaning Kit 6
ページ19に含まれる内容の要旨
The following Table 5b lists the parts that are separately marketed but are necessary when booting this product's software. When having unpacked the shipping crate, make sure that all the parts in this Table 5b are in the crate. If not so, contact where you have obtained the product. TABLE 5 b (XKT-0833 : GD-ROM DRIVE KIT) GD-ROM DRIVE GD-ROM DRIVE CARTON BOX XKT-0833 (1) Device that loads the software in a GD-ROM disc. Used for transporting the GD-ROM DRIVE. see 5 of Section 6. See FIG. 5
ページ20に含まれる内容の要旨
HOW TO USE THE CARTON BOX (GD-ROM DRIVE) When you want to order for replacing or repairing service of the GD-ROM STOP drive that is used by the product, pack it in a carton box as instructed below, and then deliver the carton box to a service agent. If you do not observe the IMPORTANT! instruction, your order may not be accepted or may be charged additionally. If you handle the GD-ROM drive differently from the following instructions, its components may be damaged. • Contain the GD-ROM d
