ページ1に含まれる内容の要旨
IM10001
February, 2009
AUTO-DARKENINGHELMET
TABLE OF CONTENTS Page
SAFETY WARNINGS – READ BEFORE USING 1
HELMET INFORMATION 2
SPECIFICATIONS 3
OPERATING INSTRUCTIONS 4
CARTRIDGE OPERATIONS/FEATURES 5
SHADE GUIDE SETTINGS 6
HELMET CARE AND MAINTENANCE 7
TROUBLE SHOOTING 8
WARRANTY INFORMATION 9
REPLACEMENT PARTS 9
OPERATOR’S MANUAL
Copyright © Lincoln Global Inc.
• World's Leader in Welding and Cutting Products •
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohi
ページ2に含まれる内容の要旨
IM10001 February, 2009 AUTO-DARKENINGHELMET TABLE OF CONTENTS Page SAFETY WARNINGS – READ BEFORE USING 1 HELMET INFORMATION 2 SPECIFICATIONS 3 OPERATING INSTRUCTIONS 4 CARTRIDGE OPERATIONS/FEATURES 5 SHADE GUIDE SETTINGS 6 HELMET CARE AND MAINTENANCE 7 TROUBLE SHOOTING 8 WARRANTY INFORMATION 9 REPLACEMENT PARTS 9 OPERATOR’S MANUAL Copyright © Lincoln Global Inc. • World's Leader in Welding and Cutting Products • • Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohi
ページ3に含まれる内容の要旨
SAFETY WARNINGS – READ BEFORE USING HELMET INFORMATION This Auto-Darkening Welding Helmet will automatically change from a light state (shade 3.5) to a dark state (Shade 9-13) when arc welding starts. WARNING The filter automatically returns to a light state when the arc stops. Shade control adjustments can be made while welding. ARC Rays can injure eyes and burn skin • Before welding, always inspect helmet and filter lens to be sure they are fitted Match your welding application to the shade in
ページ4に含まれる内容の要旨
SAFETY WARNINGS – READ BEFORE USING HELMET INFORMATION This Auto-Darkening Welding Helmet will automatically change from a light state (shade 3.5) to a dark state (Shade 9-13) when arc welding starts. WARNING The filter automatically returns to a light state when the arc stops. Shade control adjustments can be made while welding. ARC Rays can injure eyes and burn skin • Before welding, always inspect helmet and filter lens to be sure they are fitted Match your welding application to the shade in
ページ5に含まれる内容の要旨
SPECIFICATIONS OPERATING INSTRUCTIONS Headgear Adjustment LCD Viewing Area 97 x 44mm (3.82 x 1.73in) HEAD GEAR TILT ADJUSTMENT FORE / AFT ADJUSTMENT Cartridge size 110 x 90mm (4.33 x 3.54in) CROWN UV/IR Protection Up to Shade DIN 16 at all times ADJUSTMENT Arc Sensors 2 PIN HOLES FOR ADJUSTMENT Light State Shade DIN 4 Variable Welding Shades DIN 9 to 13 RATCHET KNOB Shade Control External knob - full adjustment Power Supply Solar cells - no battery required Power On/Off Fully automatic Light to
ページ6に含まれる内容の要旨
SPECIFICATIONS OPERATING INSTRUCTIONS Headgear Adjustment LCD Viewing Area 97 x 44mm (3.82 x 1.73in) HEAD GEAR TILT ADJUSTMENT FORE / AFT ADJUSTMENT Cartridge size 110 x 90mm (4.33 x 3.54in) CROWN UV/IR Protection Up to Shade DIN 16 at all times ADJUSTMENT Arc Sensors 2 PIN HOLES FOR ADJUSTMENT Light State Shade DIN 4 Variable Welding Shades DIN 9 to 13 RATCHET KNOB Shade Control External knob - full adjustment Power Supply Solar cells - no battery required Power On/Off Fully automatic Light to
ページ7に含まれる内容の要旨
ALWAYS TEST TO BE SURE THE ADF CARTRIDGE IS CHARGED BEFORE WELDING. The helmet can be placed in sunlight to charge. Do not CARTRIDGE OPERATION/FEATURES store the helmet in a dark cabinet or other storage area for long periods. While welding, the arc also charges the ADF cartridge. Variable Shade Control The shade can be adjusted from shade 9 to 13 based upon welding process or application (refer to Shade selection chart on page 6). The variable shade control SHADE GUIDE SETTINGS knob is mounted
ページ8に含まれる内容の要旨
ALWAYS TEST TO BE SURE THE ADF CARTRIDGE IS CHARGED BEFORE WELDING. The helmet can be placed in sunlight to charge. Do not CARTRIDGE OPERATION/FEATURES store the helmet in a dark cabinet or other storage area for long periods. While welding, the arc also charges the ADF cartridge. Variable Shade Control The shade can be adjusted from shade 9 to 13 based upon welding process or application (refer to Shade selection chart on page 6). The variable shade control SHADE GUIDE SETTINGS knob is mounted
ページ9に含まれる内容の要旨
HELMET CARE AND MAINTENANCE TROUBLE SHOOTING GUIDE Replacing Front Cover Lens: Replace the front cover lens if it is damaged Test your shade cartridge prior to welding by directing the front of the car- – cracked, soiled or pitted. Place your finger or thumb into recess (C) at the tridge toward a bright source of light, then using your fingers rapidly cover bottom edge of the cover lens and flex the lens upwards until it releases from and uncover the sensors. The cartridge should darken momentar
ページ10に含まれる内容の要旨
HELMET CARE AND MAINTENANCE TROUBLE SHOOTING GUIDE Replacing Front Cover Lens: Replace the front cover lens if it is damaged Test your shade cartridge prior to welding by directing the front of the car- – cracked, soiled or pitted. Place your finger or thumb into recess (C) at the tridge toward a bright source of light, then using your fingers rapidly cover bottom edge of the cover lens and flex the lens upwards until it releases from and uncover the sensors. The cartridge should darken momentar
ページ11に含まれる内容の要旨
WARRANTY INFORMATION WARRANTY INFORMATION: These helmets are warranted for a period of two years. Please contact us at 1 (800) 833-9353 for any service or warranty questions. SPATTER DAMAGE IS NOT COVERED BY WARRANTY: Do not use this product without the correct protective clear cover lenses installed properly on both sides of the Auto-Darkening Filter cartridge (ADF). The cover lenses supplied with this helmet are properly sized to work with this product and substitutions from other suppliers sh
ページ12に含まれる内容の要旨
WARRANTY INFORMATION WARRANTY INFORMATION: These helmets are warranted for a period of two years. Please contact us at 1 (800) 833-9353 for any service or warranty questions. SPATTER DAMAGE IS NOT COVERED BY WARRANTY: Do not use this product without the correct protective clear cover lenses installed properly on both sides of the Auto-Darkening Filter cartridge (ADF). The cover lenses supplied with this helmet are properly sized to work with this product and substitutions from other suppliers sh
