Chauvet 2の取扱説明書

ページ1に含まれる内容の要旨

User Manual

ページ2に含まれる内容の要旨

TABLE OF CONTENTS 1. Before You Begin ...........................................................................................................3 What Is Included ........................................................................................................................ 3 Unpacking Instructions ............................................................................................................... 3 Claims .......................................................

ページ3に含まれる内容の要旨

1. BEFORE YOU BEGIN • Cubix™ 2.0 • Warranty Card What Is • Power Cord • Quick Reference Guide Included Carefully unpack the product immediately and check the container to make sure all the Unpacking parts are in the package and are in good condition. Instructions If the box or the contents (the product and included accessories) appear damaged from Claims shipping, or show signs of mishandling, notify the carrier immediately, not CHAUVET®. Failure to report damage to the ca

ページ4に含まれる内容の要旨

Use on Dimmer Auto Programs   Product at a Outdoor Use Auto-ranging Power Supply   Glance Sound Activated Replaceable Fuse   DMX User Serviceable   Master/Slave Duty Cycle   Please read the following Safety Notes carefully before working with the product. The Safety Notes Notes include important safety information about installation, usage, and maintenance. • Always connect the product to a grounded circuit to avoid the risk of electrocution. • Always dis

ページ5に含まれる内容の要旨

2. INTRODUCTION Product Overview LED Display Fuse Holder Safety Loop DMX In/Out Power In/Out Perimeter (Side) Lenses (20) Middle Lens Cubix™ 2.0 User Manual (Rev. 5) Page 5 of 13

ページ6に含まれる内容の要旨

Product Dimensions Page 6 of 13 Cubix™ 2.0 User Manual (Rev. 5)

ページ7に含まれる内容の要旨

3. SETUP The Cubix™ 2.0 has an auto-ranging power supply and it can work with an input voltage AC Power range of 100~240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions. Always connect the product to a pro

ページ8に含まれる内容の要旨

Before mounting the product, read and follow the safety recommendations indicated in the Mounting Safety Notes. The Cubix™ 2.0 may be mounted in any position; however, make sure adequate Orientation ventilation is provided around the product. • Before deciding on a location for the product, always make sure there is easy access Rigging to the product for maintenance and programming purposes. • Make sure that the structure onto which you are mounting the product can support

ページ9に含まれる内容の要旨

4. OPERATION To access the control panel functions, use the four buttons located underneath the display. Control Panel Please refer to the Product Overview to see the button locations on the control panel. Operation Button Function Press to find an operation mode or to back out of the current menu

option Press to scroll up the list of options or to find a higher value Press to scroll down the list of options or to find a lower value Press to

ページ10に含まれる内容の要旨

DMX Channel Assignments and Values Channel Function Value Setting 7-CH 000  004 No function 005  028 Red 029  056 Green 057  084 Blue 085  112 Cyan 1 Colors 113  140 Purple 141  168 Yellow 169  197 White Side Lenses 198  224 3-Color switching 225  255 7-Color switching 000  004 No function 2 Strobe 005  255 0~30 Hz 000  127 Rotation with indexing 3 Motor Rotation Back and forth with increasing 128  255 distance 000  014 Blackout 4 Auto Programs 01

ページ11に含まれる内容の要旨

The Master/Slave mode allows a single Cubix™ 2.0 unit (the “master”) to control the Master/Slave actions of one or more Cubix™ 2.0 units (the “slaves”) without the need of a DMX Mode controller. The master unit will be set to operate in either Automatic or Sound Active mode, while the slave units will be set to operate in Slave Mode. Once set and connected, the slave units will operate in unison with the master unit. Configure the units as indicated below. Slave units: 1. Press

ページ12に含まれる内容の要旨

6. TECHNICAL SPECIFICATIONS Length Width Height Weight Dimensions and Weight 10.5 in (267 mm) 12 in (305 mm) 11.6 in (296 mm) 8.1 lbs (3.7 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Power Supply Type Range Voltage Selection Switching (internal) 100~240 V, 50/60 Hz Auto-ranging Parameter 120 V, 60 Hz 230 V, 50 Hz Consumption 50 W 48 W Operating 0.4 A 0.2 A Power linking current (units) 8 A (19 units) 8 A (32 units) Fuse F 1 A, 25

ページ13に含まれる内容の要旨

To return a product or request support: • In the U.S., contact CHAUVET® World Headquarters (see below). • In the UK or Ireland, contact CHAUVET® Europe Ltd. (see below). • In any other country, DO NOT contact CHAUVET®. Instead, contact your lighting distributor. See www.chauvetlighting.com for distributors outside the U.S., UK, or Ireland. Outside the U.S., UK, or Ireland, contact your distributor and follow their instructions on how to return CHAUVET® products to them. Vis