ページ1に含まれる内容の要旨
For assistance and information,
call toll free I-800 -BUY-AIWA.
(United States and Puerto Rico)
L
88-CL3-903-11
aiiif
DIGITAL AUDIO
980307 BYK- H-7 m
ページ2に含まれる内容の要旨
7 Condensation – Moisture may form on the CD pickup lens WARNING when: - The unit is moved from a cold spot to a warm spot TO REDUCE THE RISK OF FIRE OR ELECTRIC - The heating system has just been turned on SHOCK. DO NOT EXPOSE THIS APPLIANCE TO - The unit is used in a very humid room RAIN OR MOISTURE. - The unit is cooled by an air conditioner When this unit has condensation inside, it may not function normally. Should this occur, leave the unit for a few hours, , ● then try to operate again. 8
ページ3に含まれる内容の要旨
Wtenance TABLE OF CONTENTS Clean the unit only as recommended in the Operating Instructions. m~qe Reauirina Service PREPARATIONS Have the units serviced by a qualified service technician if: - The AC power cord or plug has been damaged PRECAUTIONS ................................................................... 1 - Foreign objects or liquid have gotten inside the unit CONNECTIONS ..................................................................3 - The unit has been exposed to rain or water B
ページ4に含まれる内容の要旨
3 Connect the AC cord to an AC outlet. CONNECTIONS When the AC cord is connected for the first time, the display window demonstrates the functions of the unit. When the power is turned on, the demonstration display is overridden by the Before connecting the AC cord operation display. When the power is turned off, the The rated voltage of your unit shown on the rear panel is 120 V demonstration mode is restored. AC. Check that the rated voltage matches your local voltage. To cancel the demonstrat
ページ5に含まれる内容の要旨
To stand the AM antenna on a surface REMOTE CONTROL Fix the claw to the slot. Inserting batteries Detach the battery cover on the rear of the remote control and insert two R6 (size AA) batteries. P. ) / L R6 (AA) To prxition the antennas When to replace the batteries FM feeder antenna: The maximum operational distance between the remote control Extend this antenna horizontally in a T-shape and fix its ends to and the sensor on the main unit should be atwroximatelv 5 meters the wall. (16 feet). W
ページ6に含まれる内容の要旨
BEFORE OPERATION SETTING THE CLOCK POWER – -@l – CLOCK DEMO –SHIFT –44, - Function - II ““m Remote 1“””””””’”~ Ej II U - sensor ,.-, PHONES — ........ m To turn the unit on 1 Press the CLOCK button while pressing the Press one of the function buttons (TAPE, TUNER, VIDEO/AUX, SHIFT button on the remote control. CD, MD). Playback of the inserted disc or tape begins, or the previously 2 Within 4 seconds, press the 11 button. tuned station is received (Direct Play Function). The hour flashes. The PO
ページ7に含まれる内容の要旨
EQ (EQUALIZER) ~BIJIJsTING THE SOUND This unit provides the following three different kinds. ROCK: Powerful sound emphasizing treble and bass POP: More presence in the vocals and midrange JAZZ: Accented lower frequencies for jazz-type music Press the MODE button repeatedly until “GEQ oFF” appears EQ on the display. Then, turn the MULTI JOG dial right or left to T-BASS select one of the three kinds, or off position within 10 seconds. —.—..... ~—– 4 When using the remote control, press the EQ butt
ページ8に含まれる内容の要旨
When an FM stereo broadcast contains noise MANUAL TUNING Press the BAND/MODE TUNER button while pressing the SHIFT button on the remote control. “MONO” appears on the display. Noise is reduced, although reception is monaural. BANDI MODE 1 TUNER MONO SHIFT To restore stereo reception, repeat the above again. 2 To change the AM tuning interval The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change th
ページ9に含まれる内容の要旨
PRESET NUMBER TUNING PFIESETTING STATIONS Use the remote control to select the preset number directly. 1 Press the TUNER/BAND button to select a band. 2 Press the numbered buttons to select a preset number. Example: To select preset number 15, press the +1 O and 5 buttons. To select preset number 10, press the +1 O and O buttons. Other methods to tune in to a preset station Press the TUNER/BAND button to select a band. Then follow any one of the methods described below to select a station. . Pre
ページ10に含まれる内容の要旨
To start play when the power is off (Direct Play OPERATION Function) Press the CD button. The power is turned on and play of the loaded disc begins. OPENI \ Z- RANDOM To replace the disc before play, press the OPEN/CLOSE button CLOSE to open the disc compartment. REPEAT MULTI 0–9,+1 o To check the remaining time JOG EDITI Press the EDIT/CHECK button while pressing the SHIFT button
ページ11に含まれる内容の要旨
2 Press the numbered buttons and the +10 button RANDOM PLAY to program a track. All ttle tracks on the disc can be played randomly. Example: During playback or in stop mode, press the To select the 12th track, press the +1 O and 2 buttons. RANDOM button while pressing the SHIFT button To select the 20th track, press the +10, +1 O and O buttons. on the remote control. Selected track “RAPdDOM” lights up on the display. Program number number To cancel random play, repeat the above again. ma ● Even
ページ12に含まれる内容の要旨
PLAYING BACK A TAPE OPERATION Insert a tape 7 Press the MODE button repeatedly until “DOLBY” appears on the display. Then, turn the MULTI JOG MULTI JOG dial right or left to turn Dolby NR on or off to MODE match the playback tape within 10 seconds. TAPEIREV MODE II EJECT For tapes recorded with DOLBY NR, turn on no NR. For tapes recorded without DOLBY NR, turn off DU NR. 2 Press the + ➤ button to start play. INSERTING TAPES Playback side of the tape . You can select a reverse mode to play back o
ページ13に含まれる内容の要旨
MUSIC SENSOR About cassette tapes If there is a 4-second or longer blank between each track, a oTo prevent accidental erasure, break off the plastic tabs search for the beginning of the current or next track during on the cassette tape after recording with a screwdriver or playl]ack can be done easily. other pointed tool. When the D indicator on the display is appearing, press the * button to move to the next track or the << button to move to the beginning of the current track, When the U indica
ページ14に含まれる内容の要旨
5 Press the ● button to start recording. BASIC RECORDING When the selected function is CD, playback and recording start simultaneously. When the selected function is MD or VI DEO/AUX, start This section explains how to record from the tuner, CD player, playback. MD recorder or external equipment. To stop recording, press the ■ button. m To pause recording, press the II button. (Applicable when the When an MD recorder or other optional equipment is connected source is TUNER, MD, VI DEO/AUX.) To r
ページ15に含まれる内容の要旨
Al EDIT RECORDING 4 Press the numbered buttons to designate the tape length. 10 to 99 minutes can be specified. Example: When using a 60-minute tape, press the 6 and O buttons. In a few seconds, the microcomputer determines the tracks 4 3 to be recorded on each side of the tape. * The 44 and PP buttons and the MULTI JOG dial are 3 also available to designate the tape length. Fb 5 5 Tape length 2 E Tape side A Remaining time o (front side) of side A The Al edit function enables CD recording witho
ページ16に含まれる内容の要旨
6 Repeat step 5 for the rest of the tracks for side A. PROGRAMMED EDIT A track whose playing time is longer than the remaining time cannot be programmed. RECORDING 3,7 4,5 Program number M 3,7 o Total number of 8 8 Programmed tracks programmed tracks ■ Remaining time of side A 7 Press the EDIT/CHECK button while pressing the SHIFT button to select side B and program the Programmed edit function enables CD recording while checking tracks for side B. the remaining time on each side of the tape as
ページ17に含まれる内容の要旨
4 Select the duration for the timer-activated period SETTING THE TIMER with the +< or ➤F button or the MULTI JOG dial, and press the 11 button. 1 1 The duration for the timer-activated period can be set between 1,2,3,4 2,4 5 and 240 minutes in 5-minute steps. 5 Prepare the source. 3 ,/ To listen to a CD, load the disc. ......-.-.’ To listen to a tape, insert the tape into the deck. 6 To listen to the radio, select the band and tune into a station. To listen to an MD, set the timer of the MD reco
ページ18に含まれる内容の要旨
CONNECTING OPTIONAL SETTING THE SLEEP TIMER EQUIPMENT 1 1 2 MD VI DEO/AUX LINE OUT SUPER WOOFER Refer to the operating instructions of the connected equipment The unit can be turned off automatically at a specified time. for details. ● The connecting cords are not supplied. Obtain the necessary Use the remote control. connecting cords. ● Consult your local Aiwa dealer for optional equipment. 7 Press the SLEEP button while pressing the SHIFT button. VIDEO/AUX JACKS & MD JACKS This unit can input
ページ19に含まれる内容の要旨
LISTENING TO EXTERNAL CARE AND MAINTENANCE SOURCES Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. —. To clean the cabinet Use a soft and dry cloth, POWER - If the surfaces are extremely dirty, use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents, such as alcohol, benzine or thinner as these could damage the finish of the unit. 1- To clean the heads and tape paths 1- After every 10 hours of u
ページ20に含まれる内容の要旨
ltltEskiTEh.i SPECIFICATIONS The word “BBE” and the “BBE symbol” are trademarks of BBE Sound, Inc. Main unit XR-M35 Under license from BBE sound, Inc. FM tuner section 87.5 MHz to 108 MHz Tuning range DOLBY NR 13.2 dBf Usable sensitivity (IHF) Dolby noise reduction manufactured under license from Dolby 75 ohms (unbalanced) Antenna terminals Laboratories Licensing Corporation. “DOLBY” and the double-D symbol no are trademarks of Dolby AM tuner section Laboratories Licensing Corporation. Tuning ra
