ページ1に含まれる内容の要旨
R
EN
MP3/WMA/AAC CD Receiver
CDA-105
FR
ES
• OWNER’S MANUAL
Please read before using this equipment.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC. ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. ALPINE ITALIA S.p.A.
1-1-8 Nishi Gotanda, 161-165 Princes Highway, Hallam Viale C. Colombo 8, 20090 Trezzano
Shinagawa-ku, Victoria 3803, Australia Sul Naviglio (MI), Italy
Tokyo 141-0031, Japan Phon
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
ENGLISH Setting the Bass Control .................................13 Contents Setting the Bass Center Frequency .............. 13 Setting the Bass Bandwidth ......................... 13 Setting the Bass Level ................................. 13 Operating Instructions Setting the Treble Control ...............................13 Setting the Treble Center Frequency ...........13 Setting the Treble Level ..............................13 WARNING Adjusting the High Pass Filter .......................
ページ4に含まれる内容の要旨
Storing Channel Presets .................................. 19 Adjusting Sound Setting in Manual Mode ......28 Turning Subwoofer ON/OFF .......................28 Receiving Stored Channels ............................. 20 Setting the Subwoofer System .....................28 Storing the desired Sports Team Setting the Subwoofer Phase .......................28 (SIRIUS only) ............................................. 20 Setting the Subwoofer Channel Storing while receiving a game broadcast ...
ページ5に含まれる内容の要旨
Operating Instructions DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN WARNING INSERTION SLOTS OR GAPS. Doing so may result in personal injury or damage to the product. WARNING CAUTION This symbol means important instructions. This symbol means important instructions. Failure to heed them can result in serious injury Failure to heed them can result in injury or or death. material property damage. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR HALT USE IMMEDIATELY IF A PROBLEM APPEARS. ATTE
ページ6に含まれる内容の要旨
Never Attempt the Following Correct Handling Do not grip or pull out the disc while it is being pulled back into the Do not drop the disc while handling. Hold the disc so you will not player by the automatic reloading mechanism. leave fingerprints on the surface. Do not affix tape, paper, or Do not attempt to insert a disc into the unit when the unit power is gummed labels to the disc. Do not write on the disc. off. CORRECT INCORRECT CORRECT Inserting Discs Your player accepts only one disc a
ページ7に含まれる内容の要旨
� USB memory function is not guaranteed. Use USB memory About media that can be played according to the terms of agreement. Use only compact discs with the label side showing the CD logo � Depending on the settings of the USB memory type, memory marks below. state or encoding software, the unit may not play back or display properly. � A file that is copy-protected (copyright protection) cannot be played back. � USB memory may take time to start playback. If there is a particular file other
ページ8に含まれる内容の要旨
3 Grasp the front panel firmly, slide to the left , and then pull to remove. Getting Started Rotary encoder (OPEN) /ENT /ESC MUTE � The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. � To protect the front panel, place it in the supplied carrying case. � When detaching the front panel, do not apply excessive force as it may result in malfunction. � Do not leave the front panel open, or drive the c
ページ9に含まれる内容の要旨
Adjusting Volume Radio Turn the Rotary encoder until the desired sound is obtained. SOURCE/ Rotary encoder /ENT // /ESC BAND Lowering Volume Quickly TUNE/A.ME Activating the Audio Mute function will instantly lower the volume level by 20 dB. Press MUTE to activate the MUTE mode. The audio level will decrease by about 20 dB. Pressing MUTE again will bring the audio back to its previous level. Preset buttons (1 through 6) Setting the Time This unit cannot receive HD Radio signals (digital ter
ページ10に含まれる内容の要旨
Presetting Stations Manually Frequency Search Function You can search for a radio station by its frequency. 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 1 Press and hold /ENT for at least 2 seconds in Radio mode to activate Frequency search mode. 2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish 2 Turn the Rotary encoder to select the desired to store the station. frequency. The se
ページ11に含まれる内容の要旨
5 To pause playback, press / . Pressing / again will resume playback. CD/MP3/WMA/AAC 6 After pressing (OPEN) to open the front panel, press to eject the disc. SOURCE/ Rotary encoder /ENT (OPEN) /ESC � Do not remove a CD during its eject cycle. Do not load more than / one disc at a time. A malfunction may result from doing either. � If the CD does not eject, press and hold for at least 2 seconds. � The “ ” indicator lights up when a disc is inserted. � Three-inch (8 cm) CDs cannot be used
ページ12に含まれる内容の要旨
MP3/WMA/AAC mode : � If a CD changer or an MP3 compatible CD changer is connected: After pressing F/SETUP to select the function mode ( / ), perform the operation within 10 seconds. : Only a file is repeatedly played back. : Only files in a folder are repeatedly played Searching for CD Text back. : A disc is repeatedly played back. On discs utilizing CD Text, songs can be searched and played by using their recorded titles. For discs without CD Text, searches are made using the track number
ページ13に含まれる内容の要旨
Supported playback sampling rates and bit rates Quick Search MP3 Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, You can search for tracks (files). 16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 8 - 320 kbps 1 Press and hold /ENT for at least 2 seconds in the CD/Changer/MP3/WMA/AAC mode to activate Quick WMA Search mode. Sampling rates: 48 kHz, 44.1 kHz, 32 kHz Bit rates: 48 - 192 kbps 2 Turn the Rotary encoder to select a desired track (file). AAC The selected track is played ba
ページ14に含まれる内容の要旨
Order of files Files are played back in the order that the writing software writes Sound Setting them to the disc. Therefore, the playback order may not be what is expected. Verify the writing order in the software’s documentation. The playback order of the folders and files is as SOURCE/ Rotary encoder (AUDIO/LOUD) follows. /ENT /ESC BAND Root folder SOUND SETUP Adjusting Subwoofer Level/Bass Level/ Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/ Defeat 1 Pre
ページ15に含まれる内容の要旨
Setting the Bass Level Setting the Subwoofer Level 5 3-3* Turn the Rotary encoder to select the desired You can change the Subwoofer Level to create your own tonal bass level (–7~+7). preference. You can emphasize or weaken the bass level. 1 Press SOUND SETUP to activate the Sound Setting 4 Press and hold /ESC for at least 2 seconds to mode. return to normal mode. 2 Turn the Rotary encoder to select the SUBW � If no operation is performed for 15 seconds, the unit will return to LEVEL Adjus
ページ16に含まれる内容の要旨
� Depending on the connected devices, some functions and display indications do not work. However, Treble Level is still adjustable if Turning Subwoofer ON/OFF an audio processor with the Treble function is connected. � When subwoofer is set to OFF and DEFEAT is set to ON, pressing When the subwoofer is on, you can adjust the subwoofer output level the SOUND SETUP button momentarily will not be functional. (refer to page 13). 6 * When the subwoofer mode is set to OFF, its level cannot be adj
ページ17に含まれる内容の要旨
If the Scroll Setting (page 17) is set to “SCROLL AUTO,” the tag information will scroll automatically. Other Functions If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is displayed. 6 * When a BT AUDIO signal is received, text information such as artist, album, song is displayed. If there is no text information, “ARTIST”/“ALBUM”/“SONG” will be displayed. About the indication display When displaying Text, the following indicators are lit according to the mode. VIEW Displaying the
ページ18に含まれる内容の要旨
About “Text” Text: SETUP Text compatible CDs contain text information such as the disc name and track name. Such text information is referred to as You can flexibly customize the unit to suit your own preferences and “text”. usage. From the SETUP menu, Visual Customizing, External Device, � Some characters may not be displayed correctly with this device, etc., can be modified. depending on the character type. � The CD changer must also be CD Text compatible for the Text SOURCE/ Rotary enc
ページ19に含まれる内容の要旨
� The unit scrolls CD text names, folder names, file names or tag BLUETOOTH IN display. Setting the Bluetooth Connection Setting the Language Font BT IN ADAPTE / BT IN OFF (Initial Setting) LANGUAGE 1 (initial setting) / LANGUAGE 2 If an optional Bluetooth INTERFACE (KCE-400BT) is connected, you Two types of font can be selected. can place a hands-free call by a Bluetooth- equipped mobile phone. LANGUAGE 1: Normal font Make this setting when the Bluetooth INTERFACE (KCE-400BT) is LANGUAGE 2:
ページ20に含まれる内容の要旨
Setting the External Digital Input POWER IC ON: The speakers are driven by the built-in D-AUX ON / D-AUX OFF (Initial setting) amplifier. When an ALPINE Ai-NET compatible digital audio processor Speakers (PXA-H701) and a DVD player (DVE-5207) not compatible with SPEAKER Ai-NET are connected, set D-AUX to ON to enjoy 5.1-channel RIGHT FRONT Front surround sound. right You can change the D-AUX NAME display when D-AUX is set to ON. Press /ENT when D-AUX is set to ON, and select D-AUX NAME
