ページ1に含まれる内容の要旨
Remote Vehicle Control System
CA 680
Owner's Manual
Deluxe Vehicle Security and Remote
Start System with Two Way
Confirming Dot Matrix Remote
Control
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY
PRECAUTIONS may not apply. Please see your installing dealer for more information.
ページ2に含まれる内容の要旨
Table of Contents Using Your Remote Control .......................................................... 3 Arming the security system Pre-arm mode Disarming the security system Disabling/Enabling confirmation chirps Attempted intrusion identification Two stage door unlock* Activating the trunk release feature* Using Your Remote Control, continued .................................... 4 Turning on the vehicle’s headlights* Activating optional AUX 1* Activating optional AUX 2* Activating optional AUX
ページ3に含まれる内容の要旨
Using Your Remote Control Arming the Security System To arm the system, exit the vehicle, close all doors, then press the LOCK icon button on the remote control. The system will sound twice and the parking lights will flash twice, indicating the system is armed. The doors will also lock at this time (if equipped and connected). The status indicator (blue warning light on the dash) will blink steadily, once per second. To arm the system silently, press and hold the LOCK icon button for 1 se
ページ4に含まれる内容の要旨
Using Your Remote Control, continued Turning on the Vehicle’s Headlights (Optional) If this feature is enabled on your system, pressing and holding the LOCK icon button on the remote control for 2 seconds will turn on the vehicle’s headlights for 30 seconds. Activating Optional AUX 1 (Optional) If this feature is enabled on your system, pressing and holding the LOCK icon button and the TRUNK icon button on the remote control simultaneously will activate an optional feature. This feature can
ページ5に含まれる内容の要旨
Using Your Remote Vehicle Starter Remote Starting Your Vehicle To activate the remote vehicle start function, press and release the OPTION button on the remote control two (2) times within 2 seconds. The system will sound, the parking lights will flash 1 time and the system will check the vehicle to ensure it is safe to start, if all safety parameters are correct, the vehicle will start within 5 seconds (diesel vehicles will take longer). The vehicle’s parking lights will turn on (or flash d
ページ6に含まれる内容の要旨
Using Your Remote Vehicle Starter, continued Operating the 2 / 4 Hour Start Up Timer Mode The system has the ability to start the vehicle every 2 or 4 hours over a 48 hour period. This feature is especially useful in cold climates where the only means to keep the engine and engine fluids warm is to periodically start the engine. WARNING! Be certain that the vehicle is outdoors before using this or any remote starting device. A running engine produces dangerous carbon monoxide fumes which can
ページ7に含まれる内容の要旨
Using Your Remote Vehicle Starter, continued Operating the Daily Start Timer The system has the ability to start your vehicle based on a 24-hour countdown timer. To activate this feature, using the remote control press the LOCK and OPTION buttons simultaneously for 1 second. The system will begin counting down from 24 hours, and start the vehicle when it reaches zero. This timer will only activate 1 time and will need to be reactivated for each 24 hour period. Remote Start Safety Features
ページ8に含まれる内容の要旨
Additional Dot Matrix Remote Control Functions Dot Matrix Remote Control Display Illumination Press and release the “F” button on the LCD remote control one time. The display will illuminate for 10 seconds. Dot Matrix Remote Control Vibrate or Tones Press an release the “F” button and the UNLOCK icon button on the LCD remote control simultaneously one time to toggle between beep tones and vibrate mode. The LCD remote control will either beep or vibrate to indicate which mode is selected.
ページ9に含まれる内容の要旨
Additional Dot Matrix Remote Control Functions, cont. Check Vehicle Status Press the LOCK icon button, TRUNK icon button and OPTION button simultaneously for 1 second. The Dot Matrix remote control will display the system’s current status. Check Temperature Press the TRUNK icon button and OPTION button simultaneously for 1 second. The LCD remote control will display the vehicle’s interior temperature. Trigger History This feature allows you to review the last four triggers to the system
ページ10に含まれる内容の要旨
Additional Dot Matrix Remote Control Functions, cont. Dot Matrix Remote Control Options Menu Accessing the Options Menu 1. Press and hold the “F” button for 3 seconds. 2. Use the TRUNK or OPTION button to scroll up and down through the the menu. 3. Press the “F” button to select the setting to change. 4. Use the LOCK/UNLOCK buttons to move the cursor left and right (where needed). Use the TRUNK/OPTION buttons to change up/down alpha/numeric symbols. 5. Press “F” to keep setting and back o
ページ11に含まれる内容の要旨
Optional Screen Icons and their Indications (Icon Mode only) SECURITY FUNCTIONS SILENT ARM VALET MODE ARM DISARM DOOR OPEN/TRIGGER TRUNK OUTPUT/TRIGGER HOOD TRIGGER IGNITION TRIGGER CALL 2 SENSOR TRIGGER SENSOR BYPASS SENSOR 2 TRIGGER CALL 1 2 3 4 5 6 7 8 1. TRANSMIT/RECEIVE 2. VIBRATE MODE 9 CH4 3. ALARM CLOCK MODE 4. COUNT DOWN TIMER MODE 5. BATTERY SAVE MODE 6. DAILY START TIMER MODE CHANNEL OUTPUT 1-4 7. TEMPERATURE START MODE 8. BATTERY INDICATOR 9. CLOCK
ページ12に含まれる内容の要旨
Optional Song Bird Feature The optional Song Bird feature (Code Alarm SB1 accessory Speaker and labor required) allows you to program songs and tones to your system (i.e. Setting a different tone for Lock activation and unlock activation). Turning Song Bird On: Press and release the TRUNK icon button on the remote control, then press and hold the LOCK icon button on the remote control within 2 seconds. The speaker will give notification that Song Bird has be turned ON. Turning Song Bi
ページ13に含まれる内容の要旨
Emergency Override Procedure If your transmitter is lost or disabled, it will be necessary use the emergency override button to turn the security system off. There are two types of emergency override procedures. Check with your installing dealer to find out what has been activated on your system. Standard Emergency Override Procedure 1. Enter the vehicle (the security system will trigger. 2. Turn the ignition key to the ON position. 3. Press and release the emergency override button (The
ページ14に含まれる内容の要旨
14
ページ15に含まれる内容の要旨
FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including any interference that may cause undesired operation. Warning! Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
