Audiovox Rampage ACC56の取扱説明書

デバイスAudiovox Rampage ACC56の取扱説明書

デバイス: Audiovox Rampage ACC56
カテゴリ: CDプレーヤー
メーカー: Audiovox
サイズ: 0.31 MB
追加した日付: 6/22/2013
ページ数: 20
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスAudiovox Rampage ACC56の取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Audiovox Rampage ACC56に関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Audiovox Rampage ACC56をこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Audiovox Rampage ACC56のフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Audiovox Rampage ACC56の説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Audiovox Rampage ACC56 取扱説明書 - Online PDF
Advertisement
« Page 1 of 20 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Audiovox Rampage ACC56を全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Audiovox Rampage ACC56の内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨








  
ACC-56
MODEL ACC-56
REMOTE-CONTROL
RF MODULATED
10-DISC CD CHANGER

ページ2に含まれる内容の要旨

INTRODUCTION Congratulations on your purchase of the RAMPAGE ACC-56 REMOTE-CONTROL 10-DISC CD CHANGER. This system allows you to easily upgrade your vehicles existing audio system to include a quality CD entertainment function. Once installed, this system utilizes an unused FM frequency on the vehicles existing audio system to play audio through the vehicles existing stereo speaker system - there’s nothing else to add or replace. Best of all, the CD Changer is easy to install. There are only

ページ3に含まれる内容の要旨

PACKING LIST MAIN UNIT FM Modulator Changer Remote Control ACC-56 INSTALLATION PARTS Bracket (L) Screw (C) Bracket (R) Hexagonal bolt with washer 5 Meter Din Cable Phillips Head Self-Tapping (M5 x 10) Screw (M3x12) 1 pc. 1 pc. 7 pcs. 1 pc. 2 pcs. Seals (A) Seals (B) Self-tapping screw (M5 x 12) 1 pc. 1 pc. 4 pcs. OTHER ACCESSORIES Owner's Manual CD Magazine (P/N ACC-56MAZ) and Installation Guide Index label sheet 1 pc. 1 pc. 1 pc. 3

ページ4に含まれる内容の要旨

REAR BEFORE INSTALLING THE UNIT Transport Lock Screws The mechanism in the CD changer is "locked" into place during shipment by three transport lock screws. Be sure to remove the screws prior to installation. BOTTOM FRONT  Caution  After removing the transport lock screws, place the supplied seals (A) over the screw holes. These seals are used to keep dust out of the unit, which could cause a malfunction. TRANSPORT LOCK SCREWS Installation and Wiring Precautions (2 RIGHT SIDE, 1 LEFT SIDE)

ページ5に含まれる内容の要旨

WHERE TO INSTALL THE CHANGER A few of the many mounting possibilities are shown below. The following precautions must be considered when selecting the mounting location. Installation Cautions and Warnings: 1. Fuel Tank - WARNING! Never install above your fuel tank as the holes you must drill may pierce the tank or the fuel lines. Also check for other obstructions such as wires, etc. 2. Excessive Heat - Avoid areas exposed to direct sunlight (on top of rear package shelf) or next to your ca

ページ6に含まれる内容の要旨

INSTALLATION The ACC-56 changer is designed for horizontal (flat), vertical (upright) or 45-degree mounting. It must never be mounted upside- down or on either one of it's sides as explained previously. The position of the built-in anti-vibration springs (left and right side), must correspond to the mounting position chosen. If the springs are not set correctly for the type of installation chosen, the anti-vibration compensation will not be effective and vibration may cause the disc to ski

ページ7に含まれる内容の要旨

PROCEDURE FOR VERTICAL INSTALLATION NOTE: If the anti-vibration spring position has been changed and verified for vertical mounting (as shown on page 6), start with step 2. Set the 4 anti-vibration springs to position "V". Attach bracket (L) and bracket (R) to each side of the unit, 1 2 using the hexagonal bolts with washer base (M5 x 8). NOTE: Use seals (A) to cover unused mounting holes on sides of unit. position "V" Bracket (L) Bracket (R) Hexagonal bolt with washer base (M5 x 8) Determine th

ページ8に含まれる内容の要旨

PROCEDURE FOR 45° ANGLE INSTALLATION NOTE: If the anti-vibration spring position has been changed and verified for 45° angle mounting (as shown on page 6), start with step 2. Set the 4 anti-vibration springs to position "45°". Attach bracket (L) and bracket (R) to each side of the unit, 1 2 using the hexagonal bolts with washer base (M5 x 8). NOTE: Use seals (A) to cover unused mounting holes on sides of unit. position "45°" Bracket (L) Bracket (R) Hexagonal bolt with washer base (M5 x 8) Determ

ページ9に含まれる内容の要旨

OVERALL WIRING VIEW This page is provided to give you a quick look at the entire wiring of the ACC-56. Use it to plan your wire routing paths and possible connection points. Detailed wiring is explained in the following pages. EXISTING CAR RADIO ANTENNA CABLE ANTENNA INPUT ANTENNA OUTPUT FM STEREO MODULATOR (89.1/88.7MHz) GREEN/WHT POWER WIRE EXISTING RADIO ANTENNA SOCKET CONNECT TO FILTER BOX 5 AMP CONSTANT +12 VDC SOURCE BLACK GROUND EXISTING CAR WIRE TO CHASSIS STEREO RADIO GROUND ORANGE/W

ページ10に含まれる内容の要旨

WIRING THE CD CHANGER FM MODULATOR DATA CABLE The 15 foot data cable connects the changer to the FM module. 15 FOOT DATA CABLE First connect the end of the data cable labelled "TO CD CHANGER" to the 8-pin socket on the left side of the changer. Route the other end of the cable up to the car’s dashboard area near your existing car radio and plug the data cable into the 8- pin mating socket on the end of the FM modulator. "TO CD CHANGER" LABEL WIRING THE FM MODULATOR CAR FUSE BLOCK The FM modulato

ページ11に含まれる内容の要旨

WIRING THE FM MODULATOR (con't.) EXISTING SCREW GROUNDED METAL PART OR BOLT OF CHASSIS BLACK GROUND WIRE The 3 foot Ground wire (black) attached to the FM modulator must be secured to a grounded metal part of the car’s chassis. If you cannot find an existing bolt or screw to fasten it to, you must drill a hole in the metal and secure it with a screw. To insure a good BLACK GROUND WIRE ground, remove any paint or grease where the wire FM MODULATOR will connect. CAR ANTENNA INPUT EXISTING

ページ12に含まれる内容の要旨

MOUNTING THE REMOTE CAR DASHBOARD CONTROL CLEAN MOUNTING AREA On the back of the remote control you will find an adhesive backed “Velcro” pad. Select the desired mounting area on your car dashboard that will allow ease of use and full REMOTE CONTROL visibility of the LCD display. Peel off the protective paper on the adhesive pad. Make certain the dash area is clean of all wax, grease, etc., and press the remote control in place. Allow a 1/2 hour for the adhesive to secure, then you will find

ページ13に含まれる内容の要旨

REMOTE CONTROL OPERATING INSTRUCTIONS Upon inserting a loaded CD magazine into the changer, the unit will begin automatically checking the magazine for the number of discs loaded and their locations. This will occur even if the vehicle’s ignition is turned off. This process will take approximately 45 seconds. During this time, the remote control function will be inoperative. 1 2 3 4 5 CONTROLS 1 LCD Display 2 Track/Disc Scan (SCN) 3 Track/Disc Repeat (RPT) 4 Track/Disc Shuffle (SFL) 5 Reset But

ページ14に含まれる内容の要旨

USE OF CONTROLS is provided to protect the unit's microprocessor and laser pickup system and should only be activated under the LCD DISPLAY following circumstances: The LCD Display Panel will illuminate when the CD changer is 1. Initial installation after all wiring is completed (this must be operating. Different symbols will appear depending on the done). function and operation in use. Each functional display is 2. If abnormal disc operation is encountered, the reset button explained in t

ページ15に含まれる内容の要旨

CAUTION: When the CD magazine is ejected by the use of the Reset button, whichever disc was in play prior to pressing Reset will be left in the play position in the changer. It is critical that before reinserting the CD magazine, you must REMOVE ALL DISCS from it. After you have inserted the empty CD magazine, press EJECT on the changer and the "in play" disc will be loaded into the empty magazine. You may then remove the magazine and reload as many discs as desired. WARNING: Avoid use of Re

ページ16に含まれる内容の要旨

USE OF THE CD MAGAZINE LOADING DISCS INTO THE MAGAZINE This CD Changer uses a specially-designed magazine to hold up to 10 compact discs. To load discs into the magazine, grip Fig. 1 the tab on the magazine tray into which you will be loading a disc and pull it out gently as shown in Figure 1. Pull out only one tray at a time. Insert a disc into the tray with the label side down (play surface facing up) as shown in Figure 2. Push the tray back into the magazine as shown in Figure 3. Load di

ページ17に含まれる内容の要旨

CD CHANGER OPERATING INSTRUCTIONS This CD Changer is designed to operate through a compatible Audiovox car stereo which incorporates the controls and display functions or through the FM section of any car stereo. Please check with your Audiovox stereo specialist for recommendations of the models that will work with this changer. The specific operating instructions for the changer will be contained within the Owner's Manual of the compatible unit. SPECIFICATIONS: Changer: Frequency Response: 5

ページ18に含まれる内容の要旨

TROUBLESHOOTING An error made in operation or during installation of this product may be mistaken for a system malfunction. Please perform the checks described below before contacting your dealer or service facility. Symptom Possible Cause Remedy No power Blown fuse Check fuses in vehicle fuse box and changer system. Replace as necessary with fuse of same type and rating as original. If fuse blows again, consult with service facility. Incorrect connection Check all wiring and correct as necess

ページ19に含まれる内容の要旨

12 MONTH LIMITED WARRANTY AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor. To obtain repair or replacement within the terms of thi

ページ20に含まれる内容の要旨

© 2002 Audiovox Electronics Corp., Hauppauge, NY 11788 Printed in China 128-6265


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Audiovox ACD-21 取扱説明書 CDプレーヤー 8
2 Audiovox CD3210 取扱説明書 CDプレーヤー 1
3 Audiovox CDC-825 取扱説明書 CDプレーヤー 4
4 Audiovox CDC-FDN 取扱説明書 CDプレーヤー 4
5 Audiovox CDC-MCR2 取扱説明書 CDプレーヤー 1
6 Audiovox P-48 取扱説明書 CDプレーヤー 1
7 Audiovox Prestige P-105 取扱説明書 CDプレーヤー 9
8 Audiovox AWM930W 取扱説明書 CDプレーヤー 4
9 Audiovox DM8710-8JAS 取扱説明書 CDプレーヤー 5
10 Audiovox ACD-28A 取扱説明書 CDプレーヤー 5
11 Audiovox Prestige SP6CDP 取扱説明書 CDプレーヤー 0
12 Audiovox PROV715 取扱説明書 CDプレーヤー 5
13 Audiovox Portable CD System 取扱説明書 CDプレーヤー 1
14 Audiovox Prestige P942W 取扱説明書 CDプレーヤー 0
15 Audiovox PROV715P 取扱説明書 CDプレーヤー 1
16 Dynabrade 13411 3 取扱説明書 CDプレーヤー 0
17 Sony 0 CDX-3160 取扱説明書 CDプレーヤー 24
18 Sony Atrac3/MP3 CD Walkman D-NE500 取扱説明書 CDプレーヤー 9
19 Sony CD Radio Cassette Player CFDRS60CP 取扱説明書 CDプレーヤー 10
20 Sony 3-0-43-722-11 CFD-V5 取扱説明書 CDプレーヤー 0