ページ1に含まれる内容の要旨
CD50 mk2
CD Player
INSTRUCTION MANUAL
Congratulations on your purchase of the Creek CD50 mk2 CD player.
Please read this manual thoroughly. It will explain the features and operation of your CD50 MK2 and help to
ensure a trouble free installation. Unpack the player carefully. It is recommended that you save the carton and
packing material for future use, should you need to move your unit or return it for service.
Your CD Player is designed to work in a horizontal position. It is important to all
ページ2に含まれる内容の要旨
CD50 mk2 Compact Disc Player SAFETY INFORMATION Designed to operate on 220-240 Volts 50Hz AC or 110-120 Volts 60 Hz AC, the CD50 mk2 is supplied with a mains lead with a fitted 3 pin plug suitable for the country of use. Should this plug need to be changed please note that the wires in the mains lead are coloured in accordance with the following code: Blue—Neutral Brown—Live Green/Yellow—Earth CONNECTING THE COMPACT DISC PLAYER Before connecting or disconnecting a unit from your audio syst
ページ3に含まれる内容の要旨
CD50 mk2 Compact Disc Player EXPLANATION OF CONTROLS 7 6 8 9 10 2 3 4 5 11 12 1 1. STANDBY button 7. SKIP BACK button 2. Disc Tray 8. SKIP FORWARD button 3. OPEN/CLOSE button 9. SCAN BACK button 4. STOP button 10. SCAN FORWARD button 5. PAUSE button 11. REPEAT button 6. PLAYbutton 12. SHUFFLE button DISPLAY A B C D E F
ページ4に含まれる内容の要旨
CD50 mk2 Compact Disc Player REMOTE CONTROL HANDSET STANDBY STANDBY 0 - 9 NUMERICAL track selection PROG PROGRAM A - B REPEAT A ↔ ↔ B TIME REMAINING TIME REPEAT REPEAT SKIP TRACK back & forward SEARCH back & forward PLAY PLAY OPEN/CLOSE STOP STOP PAUSE HANDLING DISCS This unit has been designed to play Compact Discs bearing this identification logo shown below. DVD discs cannot be played. Always place the CD in the disc tray with the label facing up. CD’s can only be played
ページ5に含まれる内容の要旨
CD50 mk2 Compact Disc Player REMOVING THE DISC The disc tray can be opened at any time by pressing the OPEN/CLOSE button. Remove the disc only after the tray has fully opened. CAUTION Do not put anything except a Compact Disc into the tray. Foreign objects can damage the mechanism. DVD’s will not play. Do not force the tray by hand during the opening and closing operations. To avoid dirt and dust entering the mechanism, keep the disc tray closed when the CD player is not in use. Never load
ページ6に含まれる内容の要旨
CD50 mk2 Compact Disc Player If the CD is deeply scratched, too dirty, or not recorded to Sony/Philips ‘Red Book’ standards, the disc may not play. If an improperly centered disc is played, noise will be heard in the mechanism. Avoid using such discs. Some discs of poor manufacture may not be readable or may skip. Check another disc should this occur. Some discs will take longer to read the T.O.C. if they have a lot of tracks, i.e. more than 25. STANDBY When switching-on from Standby, wit
ページ7に含まれる内容の要旨
CD50 mk2 Compact Disc Player TO PAUSE THE DISC PLAY Press the PAUSE button. The disc will stop playing at the current play position and PAUSE will be displayed. Press the PAUSE button again or press PLAY to resume disc play. PAUSE will disappear. CHECK THE DISK AND TRACK REMAINING TIME (Remote control only) During normal disc play, when the TIME button on the Remote control is pressed, the REM symbol will light up and the remaining playing time of the track will be displayed. Pressing the TIME
ページ8に含まれる内容の要旨
CD50 mk2 Compact Disc Player SHUFFLE PLAY Use this feature to play tracks on a disc in a random order. 1. Press the Shuffle button on the front panel. This function is not available from the remote. 2. Press the PLAY button. A track will be randomly selected and the disc will start playing. 3. Press Shuffle during Play and the the reamianing tracks will be shuffled. PROGRAMMED DISC PLAY (Remote control only) This feature allows you to play tracks in your preferred sequence. It is not possible
ページ9に含まれる内容の要旨
CD50 mk2 Compact Disc Player LISTENING TO A PROGRAMMED SEQUENCE 1. Press the PLAY button. The PLAY symbol will be displayed. 2. The disc will start playing the first programmed track. 3. After the programmed sequence has finished playing, the track display and the time display will show the number of tracks played and the total playing time CHANGING THE PROGRAM 1. Press the STOP button if the disc is playing. 2. You can modify the program by entering new track numbers. CLEARING THE MEMORY 1. Pre
ページ10に含まれる内容の要旨
CD50 mk2 Compact Disc Player REPEAT A PROGRAMMED SEQUENCE OF TRACKS 1. Enter a program. 2. Press the REPEAT button twice and the REPEAT ALL message will appear. 3. Press the PLAY button, the PLAY symbol will be displayed and the programmed sequence will start playing. 4. All programmed tracks will continue playing in order until the STOP button is pressed. 5. If the REPEAT button is pressed once more, the REPEAT ALL message will disappear and Program mode will resume. ‘A « B’ DISC PLAY (Remo
ページ11に含まれる内容の要旨
CD50 mk2 Compact Disc Player TROUBLESHOOTING GUIDE If you have followed the instructions, and are having difficulty operating your compact disc player, please use the simple guide below to help you solve the problem. Here we have listed the most common hiccups experienced by the users, which we hope will be of some help. Locate the SYMPTOM in table below and then check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION to remedy the problem. SYMPTOM POSSIBLE CAUSE CORR
ページ12に含まれる内容の要旨
Creek Audio Limited 12 Avebury Court Mark Road Hemel Hempstead HP2 7TA United Kingdom Telephone: +44 (0) 1442 260146 Fax: +44 (0) 1442 243766 E-mail: info@creekaudio.co.uk Web: www.creekaudio.com Designed and Manufactured in the United Kingdom 12
