ページ1に含まれる内容の要旨
PERSONAL CD, CD-R/RW PLAYER
with 45 SECOND ELECTRONIC
ANTI-SKIP PROTECTION
and DIGITAL AM/FM TUNER
OWNER’S MANUAL
HD7100
Visit our web site at www.emersonradio.com
HD7100_ib_0422.p65 19 22/4/2002, 11:43
ページ2に含まれる内容の要旨
Thank you......... For purchasing this Emerson Personal CD Player with AM/FM DIGITAL TUNER. The CD player has a 24 track programmable memory so you can listen to the songs on your favorite CD's in any order you choose. Or you can use the Random playback feature and let the player select the playback order for you. Use the 3-way Repeat feature to repeat a single track, the entire disc, or a programmed sequence of tracks, indefinitely. We've also included a 45 Second Electronic Anti-Skip Memory
ページ3に含まれる内容の要旨
IMPORTANT NOTES WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Avoid installing the unit in locations described below: • Places exposed to direct sunlight or • Dusty places. loseto heat radiating appliances such • Places subject to constant as electric heaters. vibration. • Humid or moist places. CLASS 1 LASER PRODUCT CAUTION CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION APPAREIL Á LASER DE CLASSE 1 WHEN OPEN AND INTERLOCKS PRODUCTO LASER DE CLASE 1 DEFE
ページ4に含まれる内容の要旨
LOCATION OF CONTROLS AND INDICATORS 9 10 8 11 7 12 6 14 5 15 16 4 3 17 2 18 1 1.) BBS (Bass Boost) ON/OFF Switch - Switch ‘ On’ to increase bass response. 2.) VOLUME Control – Raises or lowers the volume. 3.) PHONES Jack – Connect stereo headphones, included, to this jack. 4.) LINE OUT Jack – To connect this CD player to an external amplifier or recording device. Connection cable not included. 5.) CD Skip Reverse / TUNING Down Button. 6.) CD Skip Forward / TUNING Up Button. 7.) T
ページ5に含まれる内容の要旨
LCD DISPLAY INDICATORS 2 3 4 5 6 7 1 8 9 12 11 10 1.) FM/AM (Radio Band) Indicators. 2.) Track Number Display – Shows the track which is being played, and the total tracks on the disc. 3.) PROG (Program) Indicator – Appears when programming tracks or playing programmed tracks. 4.) PRESET (Radio Station Memory) Indicator. 5.) Repeat 1/ALL Indicators – Appears when the Repeat playback mode is selected. 6.) FM Stereo Indicator – Appears when FM Stereo station is received. 7.) INTRO In
ページ6に含まれる内容の要旨
POWER SOURCE This CD player can be operated on either 120V 60Hz AC house current with an optional AC adapter (not included) or on 3V DC (2 "AA" batteries, not included). BATTERY OPERATION 1.) Open the battery compartment door on the bottom cabinet by sliding it in the direction of the arrow and then lifting it open. To prevent loss, the door cannot be removed from the unit. 2.) Insert 2 "AA" batteries (not included) into the compartment. Use alkaline batteries for longest life. Follow the polari
ページ7に含まれる内容の要旨
AC OPERATION (AC Adapter not included) Connect the AC adapter to your 120V AC outlet. Then connect the small plug to the "DC IN 4.5V" jack on the back of the player as shown in the following illustration. NOTE: This optional AC adapter, should be rated as follows: Input : 120V / 60Hz AC. Output : 4.5V DC 500mA. The adapter must have a female-type plug with a positive center: Negative (–) Positive (+) • Be sure the adapter is UL listed. If you use a “Universal”-type adapter, be sure to set the
ページ8に含まれる内容の要旨
OPERATING INSTRUCTIONS NORMAL PLAYBACK 1.) Connect the headphones to the PHONES jack. Set the VOLUME control to a low level before you begin playback. Set the FUNCTION switch to CD position. To PHONES Jack 1 2.) Slide the CD Door OPEN switch to the right to release the lock and open the CD Door. 2 3.) Place your disc on the center spindle with the printed label side facing up. Press down gently near the center hole to make sure the disc is properly seated on the spindle. 4.) Close the door compl
ページ9に含まれる内容の要旨
PAUSE CONTROL Press the Play/Pause button during playback to pause momentarily. The sound stops, the track and the time display flashes but the disc continues to spin. Press the Play/Pause button again to cancel pause and resume playback. The sound returns and the display stops flashing. SKIP/SEARCH CONTROLS To skip forward or reverse to another track during playback press the or buttons repeatedly until the desired track number appears in the display. Playback will begin on the desired trac
ページ10に含まれる内容の要旨
INTRO SCAN This feature plays only the first 10 seconds of each track on the disc. 1.) Press the Stop button to stop the disc and then press MODE button three times. ‘ INTRO’ indicator flashes in the display. 2.) Press the Play/Pause button. The “INTRO” indicator stops flashing and remains ‘ On’ . The player begins to play track 1 and plays just the first 10 seconds of each track on the disc. When the first 10 seconds of each track has been played, the player stops. To cancel Intro Scan press
ページ11に含まれる内容の要旨
PROGRAMMED PLAYBACK You can program the player to play only the tracks that you want to hear, in the specific order that you want to hear them. Up to a total of 24 tracks can be programmed. You may program certain tracks to play more than once if desired. IMPORTANT: The player can only be programmed when it is in the Stop mode and the total number of tracks and playing time appear on the display. If the display is blank press the POWER ON button to start the disc. When playback begins s press t
ページ12に含まれる内容の要旨
ELECTRONIC ANTI-SKIP PROTECTION This CD player is equipped with an automatic 45 second Electronic Anti-Skip Memory and an Anti-Rolling Mechanism that will eliminate virtually all skipping during most active uses. When you press the Play/Pause button to begin playback the player immediately begins to store 45 seconds of music in a solid state memory that is impervious to shock. The player is always reading the disc 45 seconds ahead of the music you are hearing and storing that information in the
ページ13に含まれる内容の要旨
LISTENING TO RADIO 5 8 1 2 3 6 7 1.) Slide the FUNCTION Switch to RADIO position. 2.) Press the BAND Button to select the desired band, AM or FM. 3.) Tune to desired station by pressing the TUNING Up or Down button. Each time the button is pressed, the frequency changes. 4.) To search for a station quickly (automatic tuning), keep the TUNING Up or Down button pressed until the frequency starts to change rapidly then release the buttons. The tuner will stop on the first strong station. Repeat
ページ14に含まれる内容の要旨
PRESETTING STATIONS IN MEMORY Up to 10 AM and 10 FM stations can be stored into the Preset memories. They will remain in memory as long as the batteries are installed. 1.) Slide the FUNCTION switch to RADIO position. 2.) Press the BAND button to select AM or FM band, press the or button to tune a station. 3.) Press the MEMORY button – the PROG indicator blinks. 4.) While the PROG indicator is blinking: Press one of the Preset buttons to store that station in Presets M1 – M5. Example: M4. 5.)
ページ15に含まれる内容の要旨
TO RECALL PRESET STATIONS 1.) Set the FUNCTION switch to the RADIO position. 2.) Press the BAND button to select AM or FM band. 3.) Press one of the PRESET buttons to select stations stored in Presets M1 through M5 or press the M+5 Preset button and then one of the Preset buttons to select stations stored in Presets M6 through M10. 4.) To change a preset station, enter a new station into the memory you wish to change. The previously memorized station is replaced by the new station. CONNECTION TO
ページ16に含まれる内容の要旨
CARE AND MAINTENANCE CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. CLEANING THE LENS A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work. Open the disc cover and clean the lens as follows: DUST OR DRY PARTICLES Using a camera lens brush/blower, blow on the lens several times, then wipe it lightly with the brush to remove dust. Then, blow o
ページ17に含まれる内容の要旨
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM CAUSE SOLUTION Unit will not turn on. Weak or dead Replace batteries. batteries. CD compartment not Close CD compartment. closed. Disc will not play. Disc inserted incorrectly. Reinsert disc correctly. Dirty or defective disc. Try another disc. Moisture or condensation Disc: wipe with soft cloth. on disc or lens. Lens: see page 15. ‘ Care and Maintenance’ No sound from
ページ18に含まれる内容の要旨
EMERSON RADIO CORP. LIMITED WARRANTY What does this warranty cover ? Any manufacturing defects in original material, including original parts and workmanship, under normal use and conditions. For how long? For a period of ninety (90) days from the date of original purchase in the U.S. What will we do ? If you need service under this Warranty, and you provide us with the dated proof of purchase, we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facil
ページ19に含まれる内容の要旨
EMERSON RADIO CORP. EMERSON PART NO. :16-2863 PRINTED IN CHINA 204-01 HD7100_ib_0422.p65 18 22/4/2002, 11:43
