ページ1に含まれる内容の要旨
CD RECEIVER
CD-RECEIVER
РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ
KD-G521
For canceling the display demonstration, see page 6.
Zum Abbrechen der Displaydemonstration siehe Seite 6.
Информацию об отмене демонстрации функций дисплея см. на стр. 6.
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Указания по установке и выполнению соединений приводятся в отдельной инструкции.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
ИНСТРУК
ページ2に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid dire
ページ3に含まれる内容の要旨
How to read this manual CONTENTS • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in Control panel ................................... 4 “More about this unit” (see pages 19 – 21). Remote controller — RM-RK50 .............. 5 Getting started ................................. 6 Press briefly. Basic operations .................................................... 6 Radio operations .............................. 7 P
ページ4に含まれる内容の要旨
Control panel — KD-G612/KD-G611/KD-G511 Control panel Parts identification Display window 1 5 (up) / ∞ (down) buttons Display window 2 T/P TP/PTY (traffic programme/ a Main display programme type) button s Disc information indicators—TAG (ID3 3 D DISP (display) button Tag), (folder), (track/file) 4 S SEL (select) button d EQ (equalizer) indicator 5 • Control dial f Sound mode (C-EQ: custom equalizer) • (standby/on attenuator) button indicators—ROCK, CLASSIC, POPS, 6 Display window HIP HOP
ページ5に含まれる内容の要旨
Main elements and features Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) 1 (standby/on/attenuator) button • Turns the power on if pressed briefly or attenuates the sound when power is on. • Turns the power off if pressed and held. Aim the remote controller directly at the 2 5 U (up) / D (down) ∞ buttons remote sensor on the unit. Make sure there is • Changes the FM/AM/DAB bands with no obstacle in between. 5 U only. • Changes the preset stations (or services
ページ6に含まれる内容の要旨
@ Adjust the sound as you want. (See Getting started pages 13 and 14.) Basic operations To drop the volume in a moment (ATT) To restore the sound, ~ Turn on the power. press it again. To turn off the power Ÿ • Select “CD-CH” when using an Apple Basic settings iPod or a JVC D. player (see page 17). ® • See also “General settings — PSM” on pages 14 – 16. iPod is a trademark of Apple Computer, Inc., registered in the U.S. 1 and other countries. * You cannot select these sources if they 2
ページ7に含まれる内容の要旨
When an FM stereo broadcast is hard to Radio operations receive ~ Ÿ Lights up when monaural mode is activated. Reception improves, but stereo effect will be Lights up when receiving an FM stereo broadcast with lost. sufficient signal strength. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. Selected band appears. Storing stations in memory ! Start searching for a station. You can preset six stations for each band. FM station au
ページ8に含まれる内容の要旨
Manual presetting FM RDS operations Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. What you can do with RDS RDS (Radio Data System) allows FM stations 1 to send an additional signal along with their regular programme signals. By receiving the RDS data, this unit can do the following: 2 • Programme Type (PTY) Search (see the following) • TA (Traffic Announcement) and PTY Standby Receptions (see pages 9 and 15) 3 • Tracing the same programme automatically —Net
ページ9に含まれる内容の要旨
! Start searching for your favorite Using the standby receptions programme. TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level (see page 15). To activate TA Standby Reception If there is a station broadcasting a programme of the same PTY code as you The TP (Traffic Programme) have selected, that station is tuned in. indicator either lights up or fla
ページ10に含まれる内容の要旨
Tracing the same programme— Disc operations Network-Tracking Reception Playing a disc in the unit When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below). When shipped from the factory, Network- Tracking Reception is activated. All tracks will be played repeatedly until you To change the Network-Tracking Re
ページ11に含まれる内容の要旨
About MP3 and WMA discs To locate a particular track (for CD) or folder (for MP3 or WMA discs) directly MP3 and WMA “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” To select a number from 01 – 06: About the CD changer It is recommended to use a JVC MP3- compatible CD changer with your unit. • You can also connect other CH-X series CD To select a number from 07 – 12: changers (except CH-X99 and CH-X100). These units are not compatible with MP3 discs.
ページ12に含まれる内容の要旨
Other main functions Changing the display information Skipping a track quickly during play While playing an audio CD or a CD Text Only possible on JVC MP3-compatible CD changer • For MP3 or WMA disc, you can skip a track within the same folder. Ex.: To select track 32 while playing track 6 2 * While playing an MP3 or WMA disc • When “TAG DISP” is set to “TAG ON” 1 (see page 16) 2 Each time you press the button, you can • When “TAG DISP” is set to “TAG OFF” skip 10 tracks. • After the l
ページ13に含まれる内容の要旨
Selecting the playback modes Sound adjustments You can use only one of the following playback You can select a preset sound mode suitable to modes at a time. the music genre (C-EQ: custom equalizer). 1 1 2 Select your desired playback mode. 2 7 Repeat play Preset values BAS TRE LOUD (bass) (treble) (loudness) Indication (For) Mode Plays repeatedly USER 00 00 OFF (Flat sound) TRK RPT : The current track. 1 FLDR RPT* : All tracks of the current ROCK +03 +01 ON folder. (Rock or disco music)
ページ14に含まれる内容の要旨
2 General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Indication pattern changes as you adjust the level. 1 Ex.: When “TRE” is selected 2 Select a PSM item. Indication [Range] 1 BAS* (bass) Adjust the bass. [–06 to +06] 1 TRE* (treble) Adjust the treble. [–06 to +06] 2 FAD* (fader) Ex.: When you select “DIMMER” Adjust the front and rear speaker balance. [R06 to F06] 3 Adjust the PSM item selected. BAL (balance) Adjust the left and right
ページ15に含まれる内容の要旨
Indications Selectable settings, [reference page] DEMO DEMO ON : [Initial]; Display demonstration will be activated Display demonstration automatically if no operation is done for about 20 seconds, [6]. DEMO OFF : Cancels. CLOCK H 0 – 23 (1 – 12), [6] Hour adjustment [Initial: 0 (0:00)] CLOCK M 00 – 59, [6] Minute adjustment [Initial: 00 (0:00)] 24H/12H 12H O 24H, [6] Time display mode [Initial: 24H] CLK ADJ AUTO : [Initial]; The built-in clock is automatically adjusted Clock adjustment us
ページ16に含まれる内容の要旨
Indications Selectable settings, [reference page] 1 DAB VOL* You can adjust the volume level (VOL –12 — VOL +12) of DAB DAB volume adjustment tuner to match the FM sound level and store it in memory. [Initial: VOL 00] LEVEL ON : [Initial]; Activates the audio level indicator. Audio level meter OFF : Cancels; sound mode indicator is shown. DIMMER AUTO : [Initial]; Dims the display when you turn on the Dimmer headlights. ON : Activates dimmer. OFF : Cancels. TEL MUTING 1/MUTING 2 : Select eithe
ページ17に含まれる内容の要旨
• CD changer jack on the rear using KS-U57 or KS-U58 External component If “EXT IN” does not appear, see page operations 16 and select the external input (“EXT IN”). You can connect an external component to... • CD changer jack on the rear using: – Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied) for any other components (except iPod and D. player). • CD changer jack on the rear using – Interface adapter for iPod —KS-PD100 interface adapter for iPod
ページ18に含まれる内容の要旨
⁄ Select a service (either primary or DAB tuner operations secondary) to listen to. What is DAB system? Digital Audio Broadcasting (DAB) can deliver digital quality sound without any annoying interference and signal distortion. To tune in to an ensemble manually Furthermore, it can carry text, pictures, and Start searching for an ensemble, as in step ! on data. When transmitting, DAB combines the left column... several programmes (called “services”) to 1 form one “ensemble.” In addition
ページ19に含まれる内容の要旨
Tuning in to a preset DAB service More about this unit 1 Basic operations Turning on the power • By pressing SOURCE on the unit, you can 2 Select the preset DAB service also turn on the power. If the source is ready, (primary) number (1 – 6) you want. playback also starts. Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback If the selected primary service has some has been stopped previously, next time you secondary servi
ページ20に含まれる内容の要旨
• If a Traffic Announcement is received by TA Playing a disc Standby Reception, the volume level (TA VOL) • While fast-forwarding or reversing on an MP3 automatically changes to the preset level. or WMA disc, you can only hear intermittent • When Alternative Frequency Reception sounds. is activated (with AF selected), Network- Tracking Reception is also activated Playing a CD-R or CD-RW automatically. On the other hand, Network- • Use only “finalized” CD-Rs or CD-RWs. Tracking Reception ca
