ページ1に含まれる内容の要旨
Thank you for purchasing a JVC product.
KD-R200
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
CD RECEIVER: INSTRUCTIONS/INSTALLATION
Installation/connection are explained at the last section of this manual (reverse page, indicated with
symbol).
For customer Use:
Enter below the Model No. and Serial No. which
are located on the top or bottom of the cabinet.
Retain this information for
ページ2に含まれる内容の要旨
OPERATIONS Basic operations Remote sensor Check the current clock time/other information. Control panel Remote controller—RM-RK50 DO NOT expose to strong light. See also “CLK DISP“ of “General settings—PSM.” • Turn on the power. 7 Installing battery • Turn off the power [Hold]. Warning: To prevent accidents and damage • Attenuate the sound (if the • Do not install any battery other than CR2025 or its Lithium coin battery (CR2025) power is on). equivalent. • Store out of reach of children. • D
ページ3に含まれる内容の要旨
General settings—PSM TROUBLESHOOTING Enter PSM menu. Select an item. Adjust. Finish Symptoms Remedies/Causes • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. Indication Item ( : Initial) Setting • The buttons on the unit do not work as you If you press M MODE, some buttons work differently from it intended. original function. Wait for 5 seconds or press M MODE again. DEMO • DEMO ON : Display demonstration will be act
ページ4に含まれる内容の要旨
Parts list for installation and connection A B C D E Control panel Sleeve Trim plate Power cord Washer (ø5) G Mounting bolt— I F J K H M4 x 5 mm (M4 x 1/4"); Handles Lock nut (M5) Remote controller Battery Rubber cushion M5 x 12.5 mm (M5 x 1/2") INSTALLATION The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this u
