ページ1に含まれる内容の要旨
Thank you for purchasing a JVC product.
KD-G240/KD-G140
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
CD RECEIVER: INSTRUCTIONS/INSTALLATION
Installation/connection are explained at the last section of this manual (reverse page, indicated with
symbol).
For customer Use:
Enter below the Model No. and Serial No. which
are located on the top or bottom of the cabinet.
Retain this informat
ページ2に含まれる内容の要旨
OPERATIONS Basic operations Remote sensor Check the current clock time/other information. Control panel Remote controller—RM-RK50 DO NOT expose to strong light. See also “CLK DISP“ of “General settings—PSM.” • Turn on the power. 7 Installing battery • Turn off the power [Hold]. Warning: To prevent accidents and damage • Attenuate the sound (if the • Do not install any battery other than CR2025 or its Lithium coin battery (CR2025) power is on). equivalent. • Store out of reach of children. • D
ページ3に含まれる内容の要旨
General settings—PSM TROUBLESHOOTING Enter PSM menu. Select an item. Adjust. Finish Symptoms Remedies/Causes • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. Indication Item ( : Initial) Setting • The buttons on the unit do not work as you If you press M MODE, some buttons work differently from it intended. original function. Wait for 5 seconds or press M MODE again. DEMO • DEMO ON : The display demonstration will be
ページ4に含まれる内容の要旨
Parts list for installation and connection A B C D E Control panel Sleeve Trim plate Power cord Washer (ø5) G I F Mounting bolt— H J K Handles Lock nut (M5) M4 x 5 mm (M4 x 1/4"); Rubber cushion Remote controller Battery M5 x 15 mm (M5 x 5/8") INSTALLATION The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this uni
ページ5に含まれる内容の要旨
Thank you for purchasing a JVC product. KD-G394/KD-G244 Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CD RECEIVER: INSTRUCTIONS/INSTALLATION Installation/connection are explained at the last section of this manual (reverse page, indicated with symbol). 0907DTSMDTJEIN GET0493-001A EN [UI] © 2007 Victor Company of Japan, Limited ENGLISH ESPAÑOL IMPORTANT FOR LASER PRODUCTS MAINTENANCE 1.
ページ6に含まれる内容の要旨
OPERATIONS Basic operations Remote sensor (for KD-G394) Check the current clock time/other information. Control panel Remote controller—RM-RK50 DO NOT expose to strong light. See also “CLK DISP“ of “General settings—PSM.” • Turn on the power. RM-RK50 is supplied only for KD-G394. • Turn off the power [Hold]. • Attenuate the sound (if the 7 Installing battery Warning: To prevent accidents and damage power is on). • Do not install any battery other than CR2025 or its Lithium coin battery (CR2025
ページ7に含まれる内容の要旨
General settings—PSM TROUBLESHOOTING Enter PSM menu. Select an item. Adjust. Finish Symptoms Remedies/Causes • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. Indication Item ( : Initial) Setting • This unit does not work at all. Reset the unit. DEMO • DEMO ON : The display demonstration will be activated automatically if no operation is • SSM automatic presetting does not work. Store stations manually. done for about
ページ8に含まれる内容の要旨
Parts list for installation and connection A/B C D E F Hard case (for Sleeve Trim plate Power cord Washer (ø5) KD-G394)/ Control panel For KD-G394 H J G Mounting bolt I K L Handles Lock nut (M5) (M4 × 5 mm; Rubber cushion Remote controller Battery M5 × 15 mm) INSTALLATION The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to
ページ9に含まれる内容の要旨
CD RECEIVER KD-G396/KD-G395/KD-G245 KD-G396/KD-G395/KD-G245 For canceling the display demonstration, see page 6. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0486-001A [U/UH] C Cover_KD-G396[U_UH]f.indd 1 over_KD-G396[U_UH]f.indd 1 8 8/21/07 4:34:09 PM /21/07 4:34:09 PM ENGLISH
ページ10に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
ページ11に含まれる内容の要旨
How to use the M MODE button CONTENTS If you press M MODE, the unit goes into functions mode, then the number buttons and 5/∞ buttons will work Control panel — as different function buttons. KD-G396/KD-G395/KD-G245 .................. 4 Ex.: When number button 2 works as Remote controller — RM-RK50 ........... 5 MO (monaural) button. Getting started ................................ 6 Basic operations ................................................... 6 Radio operations ......................
ページ12に含まれる内容の要旨
Control panel — KD-G396/KD-G395/KD-G245 Parts identification Display window 1 5 (up) / ∞ (down) buttons ; RND (random) button 2 0 (eject) button a AUX (auxiliary) input jack 3 (standby/on attenuator) button s KD-G396/KD-G395: Disc information indicators— 4 KD-G396/KD-G395: Remote sensor TAG (Tag information), (track/file), (folder) DO NOT expose the remote sensor to strong light d DISC indicator (direct sunlight or artificial lighting). f Playback mode / item indicators—RND (random), 5 Loadi
ページ13に含まれる内容の要旨
Main elements and features Remote controller — RM-RK50 RM-RK50 is supplied only for KD-G396/KD-G395. Installing the lithium coin battery (CR2025) 1 (standby/on/attenuator) button Aim the remote controller directly at the remote • Turns the power on if pressed briefly or sensor on the unit. Make sure there is no obstacle attenuates the sound when the power is on. in between. • Turns the power off if pressed and held. 2 5 U (up) / D (down) ∞ buttons • Changes the FM/AM bands with 5 U. War
ページ14に含まれる内容の要旨
Basic settings Getting started • See also “General settings — PSM” on pages 11 and Basic operations 12. ~ Turn on the power. 1 2 Ÿ 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” * You cannot select “CD” as the playback source if 2 Setting the clock there is no disc in the unit. Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the ! For FM/AM tuner minute. 3 Finish the procedure. ⁄ Adjust the volume. To check the current c
ページ15に含まれる内容の要旨
Storing stations in memory Radio operations You can preset six stations for each band. ~ FM station automatic presetting — SSM (Strong-station Sequential Ÿ Memory) Lights up when receiving an FM stereo 1 Select the FM band (FM1 – FM3) you want to broadcast with sufficient signal strength. store into. 2 ! Start searching for a station. When a station is received, 3 searching stops. To stop searching, press the same button again. “SSM” flashes, then disappears when automatic presetting i
ページ16に含まれる内容の要旨
To fast-forward or reverse the track Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To go to the next or previous track or To go to the next or previous folder (for MP3/ WMA discs in KD-G396/KD-G395) To check the other information while listening to an FM or AM station To locate a particular track (for CD) or folder Clock Ô Frequency (for MP3/WMA discs in KD-G396/KD-G395) directly To select a number from 01 – 06: Disc operations Playing a disc in the unit To s
ページ17に含まれる内容の要旨
While playing an MP3 or a WMA track Other main functions (for KD-G396/KD-G395) Skipping tracks quickly during play • When “TAG DISP” is set to “TAG ON” (see page 12) • KD-G396/KD-G395: For MP3 or WMA discs, you can skip tracks within the same folder A = Album name/performer (folder Ex.: To select track 32 while playing tracks whose 2 name * ) [ ] = Track title (file number is a single digit (1 to 9) 2 name * ) [ ] = B = (back to the 1 beginning) 2 • When “TAG DISP” is set to “TAG
ページ18に含まれる内容の要旨
7 Random play Adjusting the sound You can adjust the sound characteristics to your Mode Plays at random preference. FLDR RND * : All tracks of the current folder, then the tracks of the next folder 1 and so on. [ ] ALL RND : All tracks of the current disc. [ ] RND OFF : Cancels. 2 * KD-G396/KD-G395: Only while playing an MP3 or a WMA disc. [ ] : Corresponding indicator lights up on the Indication, [Range] display 1 BAS * (bass), [–06 to +06] Adjust the bass. Sound adjustments 1 MID
ページ19に含まれる内容の要旨
Other external component General settings — PSM operations You can change PSM (Preferred Setting Mode) items listed in the table on page 12. You can connect an external component to the AUX (auxiliary) input jack on the control panel. 1 2 Select a PSM item. Portable audio player, etc 3 Adjust the PSM item selected. Stereo mini plug (not supplied) ~ Ÿ Turn on the connected component and 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. start playing the source. ! Adjust the vo
ページ20に含まれる内容の要旨
Indications Item Selectable settings, [reference page] ( : Initial) DEMO • DEMO ON : The display demonstration will be activated automatically if no Display demonstration operation is done for about 20 seconds, [6]. • DEMO OFF : Cancels. 1 CLK DISP * • ON : The clock time is shown on the display at all times when the power Clock display is turned off. • OFF : Cancels; pressing DISP will show the clock time for about 5 seconds when the power is turned off, [6]. CLOCK H 1 – 12 [Initial:
