ページ1に含まれる内容の要旨
JX-CD 4300D
MICRO COMPONENT SYSTEM
INSTRUCTION MANUAL
Web site: http://www.jwin com
ページ2に含まれる内容の要旨
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that there This symbol indicates that are important operating and dangerous voltage constituting maintenance instructions in the a risk of electric shock is present literature accompany-ing this unit. within this unit. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be road before the product is operated 2. Retain Instructions - The safety and operating Instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning.
ページ4に含まれる内容の要旨
13. Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection FIGURE 1 against voltage surges and built-up static charges. Article EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE 810 of the National Electrical Code, ANSI/NFPA 70, ANTENNA LEAD IN WERE provides information with regard to proper grounding GROUND of the mast and supporting structure, grounding of CLAMP t
ページ5に含まれる内容の要旨
~ ~ ~ ~ 7 8 9 10 6 4 3 2 11 13 5 12 1 14 FM MODE /BEAT CANCEL 20 18 16 MONO 1 19 17 15 22 2 ST 21 23 24 25 28 27 26 25 Fig.1 VOLTAGE VOLTAGE 110 220 110 220 120 240 120 240 SELECTOR SELECTOR (For dual voltage model only!) Fig.2 4
ページ6に含まれる内容の要旨
Fig. 3a Fig. 3b Fig. 3c Fig.4 5
ページ7に含まれる内容の要旨
Fig.5 Fig.6 Fig.7 Fig.8 Fig.9 6
ページ8に含まれる内容の要旨
ENGLISH PRECAUTIONS 24. Speaker terminals (SPEAKERS) The apparatus shall not be exposed to drip- 25. Speaker release levers ping or splashing. 26. Voltage selector (Option) Do not use where there are extremes of tem- 27. AC input socket (AC INPUT) perature (below 5 C or exceeding 35 C). 28. Battery compartment lid Because of the CD player's extremely low noise and wide dynamic range, there might be a tendency to set the volume on the am- SPEAKERS plifier unnecessarily high. Doing so may pro- Spe
ページ9に含まれる内容の要旨
GENERAL OPERATION CD PLAY Use compact discs bearing the symbol shown in Fig. 5 In addition to conventional 12 cm CDs, this system can be used to play 8 cm CDs without an Adjusting the volume adapter. Turn the VOLUME control. 1. Set the FUNCTION switch to CD. Bass expander button 2. Press the CD compartment lid (CD OPEN/ Press the DBBS button to ON to enhance the CLOSE portion) to open it. bass sound. 3. Place the disc with the label facing up on the turntable (Fig. 6). (Place only one disc at a
ページ10に含まれる内容の要旨
Notes on handling compact discs PROGRAMMED PLAY - Do not expose the disc to direct sunlight, Up to 20 tracks on a disc can be programmed for high humidity or high temperatures for ex- play in any order. tended periods of time. - To begin the programming procedure, select - Discs should be returned to their cases after CD function first. use. - The same track can be programmed more - Do not apply paper or write anything on the than once. disc surface. - Load a disc that you want to programme be-
ページ11に含まれる内容の要旨
LISTENING TO THE RADIO LISTENING TO TAPES 1. Set the FUNCTION switch to TAPE. 1. Set the FUNCTION switch to RADIO. 2. Press the STOP/EJECT button. The cass- 2. Set the BAND switch to FM or AM as desired. 3. Tune in a desired station by turning the TUN- ette holder opens. 3. Load the cassette into the cassette holder ING control. (Fig.7). After loading the cassette, press the 4. To turn the radio off, set the FUNCTION cassette holder back into position. switch to TAPE/OFF. 4. Press the PLAY butto
ページ12に含まれる内容の要旨
RECORDING MAINTENANCE Recording copyright material without permission Cleaning the tape heads of the copyright owners is usually an infringement. To ensure continued high performance, use a If you wish to record copyright material, cleaning tape (available from your local audio permission from the copyright owner is necessary. dealer) to clean the head block of the deck after jWIN does not approve of, and cannot be held about every 10 hours of use responsible for, any unlawful use of this machin
ページ13に含まれる内容の要旨
12
ページ14に含まれる内容の要旨
5 6 Esta unidad tambien puede reproducir el CD-R/ RW. sin embargo. y dependiendo de las condici- ones de grabacion, algunos CD-R/RW no pueden reproducirse. 13
ページ15に含まれる内容の要旨
20 14
ページ16に含まれる内容の要旨
7 15
ページ17に含まれる内容の要旨
9 8 16
ページ18に含まれる内容の要旨
SPECIFICATIONS CD Player General Channels: Output power: 2-channel stereo 4Wx2(RMS) Sampling frequency: Speakers: 44.1 kHz 12cmx2(4ohms) Pick-up: Terminal: PHONES: 32 ohms Semiconductor laser Laser output: Power source: 0.6 mW (Continuous wave max.) AC: 110/220V 60/50Hz DC: 12V (UM -1X8) batteries Wave length: 790 nm Dimensions: Wow/Flutter: 555(W) x 250(H) x 230 (D) mm Below measurable limits Weight: Approx. 5.1 kg (without batteries) Radio Reception frequency: Specifications subject to change
