ページ1に含まれる内容の要旨
KDC-MP2028
KDC-MP228
KDC-228
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER-LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help
you obtain the best performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provid
ページ2に含まれる内容の要旨
Contents Warning 3 Menu system 18 Menu System Safety precautions 4 Security Code Touch Sensor Tone Notes 5 Manual Clock Adjustment DSI (Disabled System Indicator) About CDs 6 CRSC (Clean Reception System Circuit) Receive mode Setting About MP3 and WMA 7 SIRIUS ID (ESN) display Auxiliary Input Display Setting General features 8 Text Scroll Power CD Read Setting Selecting the Source Demonstration mode Setting Volume Basic Operations of remote 22 Attenuator System Q Accessories/ Installation Proce
ページ3に含まれる内容の要旨
2Warning 2CAUTION NOTE Use of controls or adjustments or performance of This equipment has been tested and found to procedures other than those specified herein may comply with the limits for a Class B digital device, result in hazardous radiation exposure. pursuant to Part 15 of the FCC Rules. These limits In compliance with Federal Regulations, following are designed to provide reasonable protection are reproductions of labels on, or inside the product against harmful interference in a re
ページ4に含まれる内容の要旨
Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the KENWOOD disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. Note that any KENWOOD disc changers/ C
ページ5に含まれる内容の要旨
Notes • If you experience problems during installation, Before using this unit for the first time consult your Kenwood dealer. This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the • If the unit fails to operate properly, press the Reset (page 21). button. The unit returns to factory settings when the Reset button is pressed. • Press the reset button if the disc auto changer fails About SIRIUS Satellite radio
ページ6に含まれる内容の要旨
About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. • CDs with coloring on the recording surface or that Also, don’t use a CD with tape stuck on it. are dirty can’t be use
ページ7に含まれる内容の要旨
About MP3 and WMA The playable MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following this unit limitation. The Audio file, which is out of the File/Folder name: 64 (Joliet: 32) characters specification, may not able to be played normally, ID3 Tag/Contents property (WMA): 30 characters or the file and folder names may not be displayed correctly. • File/Folder name is the number of the characters Playable Audio file including
ページ8に含まれる内容の要旨
General features Control knob Release button VOL SCRL + VOL AUD SET UP CS DISP Q MENU OFF SCAN RDM REP ATT DIM - AUTO AME ATT/DIM Q SRC LOUD indicator ATT indicator Clock display Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button. P
ページ9に含まれる内容の要旨
System Q 5 Exit Audio Control mode Press any button. You can recall the best sound setting preset for Press the button which is not [VOL] knob and different types of music. [ATT] button. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Audio Setup Press the [Q] button. Setting the Sound system, such as Volume offset Each time the button is pressed, the sound and Loudness. setting switches. Sound setting Display 1 Select the source for adjustment Natural "NATURAL" Pr
ページ10に含まれる内容の要旨
General features In Audio file source (KDC-MP2028/MP228) Speaker Setting Information Display Fine-tuning so that the System Q value is optimal Song title & Artist name "TITLE" when setting the speaker type. Album name (MP3 only) & Artist name "ALBUM" 1 Enter Standby Folder name "FOLDER" Press the [SRC] button. File name "FILE" Select the "STANDBY" display. Track number & Play time "P-TIME" Clock "CLOCK" 2 Enter Speaker Setting mode Press the [VOL] knob. In HD Radio source 3 Select the Speaker t
ページ11に含まれる内容の要旨
Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and The audio system automatically mutes when a taken with you, helping to deter theft. call comes in. Removing the Faceplate When a call comes in Press the Release button. "CALL" is displayed. The faceplate is unlocked, allowing you to detach The audio system pauses. it. Listening to the audio during a call Press the [SRC] button. • The faceplate is a precision piece of equipment and The "CALL" display disappears and
ページ12に含まれる内容の要旨
Tuner features SCRL + VOL AUD SET UP CS DISP Q MENU OFF SCAN RDM REP ATT DIM - AUTO AME SRC 1 - 6 AUTO/ Control AME knob ST indicator Band display Frequency display Preset station number Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time the button is pressed, the Tuning Press the [SRC] button. mode switches as shown below. Select the "TUNER" display. Tuning mode Display Operation 2 Select the band Auto seek "AUTO 1" Autom
ページ13に含まれる内容の要旨
Station Preset Memory Putting the station in the memory. 1 Select the band Push the Control knob to [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob to [4] or [¢]. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select
ページ14に含まれる内容の要旨
CD/Audio file/External disc control features 0 SCRL + VOL AUD CS SET UP DISP Q MENU OFF SCAN RDM REP F.SEL M.RDM ATT DIM - AUTO AME SCAN RDM/ REP F.SEL M.RDM Control SRC knob 3 Disc number IN indicator Track number Track time Playing CD & Audio file Playing External Disc Playing discs set in the optional accessory disc When a disc is inserted player connected to this unit. Press the [SRC] button. Press the [SRC] button. Select the "CD" display. Select the display for the disc player you want.
ページ15に含まれる内容の要旨
Function of disc changers with remote Fast Forwarding and Reversing Direct Disc Search Fast Forwarding Doing Disc Search by entering the disc number. Hold down on [¢] of the Control knob. Release your finger to play the disc at that point. 1 Enter the disc number Press the number buttons on the remote. Reversing Hold down on [4] of the Control knob. 2 Do Disc Search Release your finger to play the disc at that point. Press the [FM+] or [AM–] button. Canceling Direct Disc Search • The sound is n
ページ16に含まれる内容の要旨
CD/Audio file/External disc control features Function of the KDC-MP2028/KDC-MP228 Scan Play Function of Audio file Playing the first part of each song on the disc you Folder Select are listening to and searching for the song you Quickly selecting the folder you want to listen to. want to listen to. 1 Enter Folder Select mode 1 Start Scan Play Press the [F.SEL] button. Press the [SCAN] button. "F-SELECT" is displayed. "TRAC SCN" (CD), "FILE SCN" (Audio file) is During Select mode the folder in
ページ17に含まれる内容の要旨
HD Radio control features SCRL + VOL AUD SET UP CS DISP Q MENU OFF SCAN RDM REP ATT DIM - AUTO AME SRC 1 - 6 AUTO/ Control AME knob ST indicator Band display Frequency display Preset station number • With the HD Radio tuner, you can use the similar Tuning functions to , , , and of Tuner features. Refer to Tuner features for 1 Select HD Radio source how to use the functions. Press the [SRC] button.
ページ18に含まれる内容の要旨
Menu system SCRL + VOL AUD CS SET UP DISP Q MENU OFF SCAN RDM REP ATT DIM - AUTO AME Control MENU SRC knob Menu display Menu System 4 Exit Menu mode Press the [MENU] button. Setting during operation beep sound etc. functions. The Menu system basic operation method is • When other items that are applicable to the basic explained here. The reference for the Menu items operation method above are displayed, afterwards their setting content chart is entered. (Normally the and their setting cont
ページ19に含まれる内容の要旨
In Standby mode Press the Reset button and when it’s removed from the battery power source Security Code 1 Turn the power ON. Because authorization by the Security Code is 2 Do the step 4 through 7 operation, and enter required when it’s removed from the vehicle, the Security Code. personalizing this unit is by using the Security "APPROVED" is displayed. Code is a help in preventing theft. The unit can be used. • When the Security Code function is activated, the code can’t be changed and t
ページ20に含まれる内容の要旨
Menu system In Standby mode Receive mode Display Operation Auto mode "AUTO" DSI (Disabled System Indicator) Analog broadcasts and digital broadcasts will be switched A red indicator will blink on the unit after the automatically. faceplate is removed, warning potential thieves. When both are being transmitted, the digital broadcast will have Display Setting priority. "DSI ON" LED flashes. Digital "DIGITAL" Digital broadcasts only. "DSI OFF" LED OFF. Analog "ANALOG" Analog broadcasts only. 4
