ページ1に含まれる内容の要旨
Instructions for use
Thank you for purchasing the Musical Fidelity M1CDT Compact Disc transport.
The M1CDT consists of a top quality CD slot-loading mechanism with unsurpassed playability. The mechanisms
guaranteed to read a wide range of CDDA, CD-R and CD-R/W disks and features CD text which picks up track,
album and artist details, where available, from the disk.
This unit allows playback of 44.1 kHz 16-bit SPDIF digital CD audio, via optical, coaxial RCA, or balanced XLR
con
ページ2に含まれる内容の要旨
CONTENTS Section Page Safety Information – Laser information and warnings 3 – Mains plug (UK only), modification warning 4 General advice – Installation precautions 5 Disposal information – EU disposal information 6 Installation – Introduction, cleaning, installation, power connections, audio 7 connections, digital connections Facilities and connections – Illustrations - main unit front & rear panels 8 Remote control handset – Operation and illustration 9 Operation – Loading and playin
ページ3に含まれる内容の要旨
SAFETY INFORMATION CLASS 1 LASER PRODUCT The M1CDT is a CD player transport which has been designed and manufactured according to FDA regulations "title 21, CFR, chapter 1, sub-chapter J, based on the Radiation Control for Health and Safety Act of 1968", and is classified as a Class 1 laser product. There is no hazardous radiation during normal use because invisible radiation emitted inside this product is completely confined within the protective housing. However you must observe
ページ4に含まれる内容の要旨
SAFETY INFORMATION MANUAL HISTORY IMPORTANT! (U.K. only) RELEASE DATE CHANGES This unit is supplied in the U.K. with mains lead fitted with a moulded 13 amp plug. If, for any reason, it is st st necessary to remove the plug, please remove the fuse holder and dispose of the plug safely, out of reach of M1 CDT manual issue 1 1 February 2011 1 Issue children. Drawings and legacy features th Issue 2 14 July 2011 It must not be plugged into a mains outlet. corrected The wires
ページ5に含まれる内容の要旨
SPECIFICATIONS GENERAL ADVICE Installation, Precautions & User Information Output This new M1CDT is designed and built to provide trouble-free performance, but as with all electronic devices it Output impedance 75 ohms RCA SPDIF is necessary to observe a few precautions: 110 ohms XLR AES/EBU • Heed all warnings shown on the back of the product. Output RCA output 0.7 V peak-peak nominal • Only connect the M1CDT to a mains outlet having the same voltage as marked at the back of
ページ6に含まれる内容の要旨
ITEM DISPOSAL INFORMATION PROBLEMS? Basic problem-solving with a CD player is similar to troubleshooting other electrical or electronic equipment. Always check the DISPOSAL most obvious possible causes first, such as the following examples: The crossed out wheeled bin label that appears on the back panel of the product indicates that the product must not be disposed of as normal household waste. To prevent possible harm to the Problem Probable Cause Remedy environment please separ
ページ7に含まれる内容の要旨
OPERATION INSTALLATION If at any time you wish to add a track to the list, press the CLEAR button to obtain the next step number. Alternatively, to delete a previous entry, press CLEAR a second time to remove the last entry. Repeated Introduction pressing of CLEAR will then erase each step in reverse order. So to delete an entire program sequence from the memory, press CLEAR repeatedly until “PROGRAM 1” is shown in the display. Congratulations on the purchase of the new M1CDT pl
ページ8に含まれる内容の要旨
FACILITIES & CONNECTIONS OPERATION OPERATION If REPEAT is then pressed whilst in shuffle mode, machine reverts to repeat mode, cancelling shuffle function 1 PLAY 7 0:39 repeat Pressing ►►| selects the next track in random order. SCAN INTRODUCTION The scan-introduction function allows play back of just the start of each track on the disc, for instance to locate a preferred track by ear. Press INTRO on the remote control, and if the player has stoppe
ページ9に含まれる内容の要旨
OPERATION REMOTE CONTROL HANDSET REPEAT PLAYBACK The remote control shown below enables functions from the M1CDT to be operated from a convenient distance. The REPEAT button on the remote control allows the repeated playback of either one track or all tracks on the disc. Equivalent buttons on the remote control have the same functions as those on the front panel of the unit. Other By pressing the REPEAT button once, only the current track is repeated, and the display shows functio
ページ10に含まれる内容の要旨
OPERATION OPERATION LOADING AND PLAYING COMPACT DISCS TRACK SELECTION | ◄◄ ►►| Switch on unit. To load a CD gently introduce the CD into the slot in the front panel. The mechanism will sense To change track, the track skip buttons | ◄◄ and ►►| on the front panel can be pressed to jump forwards or the presence of the CD and draw it in automatically. backwards one track in either direction. There is no need to use any force, if a CD does not go in, please check there is no CD al
