ページ1に含まれる内容の要旨
To contact LG Electronics, 24 hours a day,
7 days a week:
USA i CANADA I_LGCANADA
Or visit us on the Web at:
USA us,lge,com CANADA www, tge,ca
Pour contacter LG Electronics, 24 heures par
jour, 7 jours par semaine:
USA 1_243-1Y3_ CANADA I_LGCANADA
Ffl CH DOOfl
Ou visitez notre site Web & I'adresse:
USA us,lge,com CANADA www.tge.ca
Para comunicarse @n LG Electronics,
24 horas a[ dia, 7 dias a la semana:
USA 1_24._ CANADA I_LGCANADA
O visitenos en la Web en:
iNS_I}S! INStil{It/leSS ,,q %, }
USA us
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION Basic Safety Precautions ........................................ 3 f CFC Disposal .................................................................................. 4 K YOU! How to Connect Electricity ...................................... 5 PARTS AND FEATURES Congratulations on your purchase Special Features ................................................................................ 6 and welcome to the LG family. Key Parts and Com_nents ......................
ページ3に含まれる内容の要旨
BASIC SAFETY PRECAUTIONS This guide contains many important safety messages. Always read and obey all safety messages. _This is the safety alert symbol, It alerts you to safety messages that inform you of hazards that can kill or hurt you or others or cause damage to the product, All safe_ messages will be preceded by the safety alert symbol and the hazard signal word DANGER, WARNING, or CAUTION These words mean: &DANGER You might be killed or seriously injured if you don't follow instructions.
ページ4に含まれる内容の要旨
BASIC SAFETY PRECAUTIONS (CONT.) DO NOT refreeze frozen foods which have • Do not use drier to dry the inside, nor light a candle to remove odor. thawed completely. The United States Department of Agriculture in Home and Garden • Install in places away from the fire such as the place Bulletin No. 69 says: where flammable gas is leaked. ...You may safely refreeze frozen foods that have • This appliance is not intended for use by persons thawed if they still contain ico crystals or if they are (in
ページ5に含まれる内容の要旨
HOW TO CONNECT ELECTRICITY IMPORTANT: Please read carefully. WARNING Electrical Shock Hazard For personal _fety, this appliance must properly ground_. Have the wall outlet and the circuit checked by a qualified el_triclan to make sure the outlet is properly grounded. RECOMMENDED GROUNDING METHOD USE OF EXTENSION COR_ The refrigerator should always be plugged into B_ause of _tential safety hazards under its own individual properly grounded electrical certain conditions, we strongly recommend out
ページ6に含まれる内容の要旨
PARTS AND SPECIAL FEATURES CONTROL PANEL LED DISPLAY SCREEN Simple electronic controls are user-friendly_ The LED screen shows refrigerator and freezer temperatures, displays water filter status, dispenser information, and more. ICE PLUS 0 When this feature is activated, the freezer section will run at the coldest temperature for a 24- hour period to increase ice production by about 20 percent. FILTERED WATER AND ICE DISPENSER 0 The water dispenser offers fresh, chilled, filtered water through t
ページ7に含まれる内容の要旨
PARTS AND KEY PARTS AND COMPONENTS In addition to the special features and components outlined in the Special Features section, there are several other important components that are referenced in this manual. ADJUSTABLE REFRIGERATOR SHELVING @ O LED INTERIOR LAMPS The refrigerator compartment shelves are adjustable to allow flexibility for storage needs. FIXED DOOR BIN MODU_R DOOR BINS Q Three interchangeable bins can be arranged to suit your storage needs. FIXED DOOR BIN REMOVABLE ICE STORAGE B
ページ8に含まれる内容の要旨
CHOOSE THE PROPER LOCATION WARNING • To reduce the risk of electric shock, do not Excessive Weight Hazard install the refrigerator in a wet or damp area. Two or more p_ple are required when • Select a place where a water supply can be moving and unpacking the appliance. easily connected for the automatic icemaker • Store and install the refrigerator where it will not and dispenser. be exposed to temperatures below freezing or • Unstable installation may cause vibration and exposed to outdoor we
ページ9に含まれる内容の要旨
FLOORING To minimize noise and vibration, the refrigerator • Carpeting and soft tile surfaces are not recommended. MUST be installed on a solidly constructed floor. • Never install the refrigerator on a platform or To avoid vibration, the unit must be level. If weakly supported structure. required, adjust the leveling legs to compensate NOTE: When moving the refrigerator for cleaning for unevenness of the floor. The front should be or service, be sure to protect the floor. Always slightly higher
ページ10に含まれる内容の要旨
HANDLE REMOVAL (CONT.) HANDLE REINSTALLATION f,,, %_ Place the handle on the door by aligning Place the handle on the door by aligning handle footprints to fit mounting fasteners and handle footprints to fit mounting fasteners and tighten the set screws with a 2.5 mm (3/32") tighten the set screws on the bottom of the Allen wrench. handle with a 3.1 mm (1/8") Allen wrench. NOTE: if the handle mounting fasteners need NOTE: if the handle mounting fasteners need to be tightened or removed use a 1/4
ページ11に含まれる内容の要旨
DOOR AND DRAWER REMOVAL (CONT.) DOOR REMOVAL (CONTJ \ ®) • Open the door. Remove the top hinge cover To remove the right refrigerator door: screw (1). • Open the door. Remove the top hinge cover • Use a flat-head screwdriver to pry back the screw (1). Lift up the cover (2). hooks (not shown) on the front underside of • Remove the cover. the cover (2). Lift up the cover. • Disconnect the wire harness (3), • Remove the cover. Pull out the tube (3). • Rotate the hinge lever (4) clockwise, • Disconn
ページ12に含まれる内容の要旨
DOOR AND DRAWER REMOVAL (CONT.) DOOR REINSTALLATION f,,, %_ Install the right-side door first. • Fit the top hinge (1) over the hinge lever latch (2) and into place. Rotate the lever (3) • Lower the door onto the middle hinge pin as counterclockwise to secure the hinge. shown. • Connect the wire harness (4). • Make sure the plastic sleeve is inserted in the bottom of the door. • Hook the tab on the door-switch side of the cover (5) under the edge of the wire opening in the cabinet top. Position
ページ13に含まれる内容の要旨
DOOR AND DRAWER REMOVAL (CONT.) DOOR REINSTALLATION (CONT.) Cover Cover Screw • Push the water supply tube (6) into the hole insert the water supply tube into the connector. on the top case and pull it through the backplate. • insert the tube at least 5/8 in. (15 ram) into the connector. • Hook the tab on the door-switch side of the cover under the edge of the wire opening in the cabinet top. Position the cover into place. Insert and tighten the cover screw. &CAUTION Collet Tube InsertLine -- Cl
ページ14に含まれる内容の要旨
DOOR AND DRAWER REMOVAL (CONT.) FREEZER DRAWER REMOVAL CAUTION • When laying the drawer down, be careful not to • To avoid possible injury or product or property damage the floor or hurt your feet with the sharp damage, you will need t,,,¢opeople to perform the edges on the hinge side. following instructions. • When you remove the drawer, do not hold the handle. It may come off and could cause injury. TOP DRAWER Remove the screws of the rail on both sides. To remove the freezer drawer, pull the
ページ15に含まれる内容の要旨
DOOR AND DRAWER REMOVAL (¢ONTJ FREEZER DRAWER REMOVAL &CAUTION • When laying the drawer down, be careful not to • To avoid _ssible injury or product or property damage the floor or hurt your feet with the sharp damage, you will need two people to perform the edges on the hinge side. following instruction& • When you remove the drawer, do not hold the handle. It may come off and could cause injury. BOSOM DRAWER Remove the screws of the rail on both sides. To remove the freezer drawer, pull the dr
ページ16に含まれる内容の要旨
DOOR AND DRAWER REMOVAL (CONT.) FREEZER DRAWER REINSTALLATION CAUTION &DANGER • To avoid possible injury or product or property Risk of Child Entrapment damage, you will need two people to perform the • To prevent acddental child and pet entrapment following instructions. or suffocation risk, DO NOT allow them to play inside of the freezer drawer. • DO NOT step or sit on the freezer drawer. TOP DRAWER To reinstall the freezer drawer, hold the center Hook door supports (1) into rail tabs (2) bar
ページ17に含まれる内容の要旨
DOOR AND DRAWER REMOVAL (CONT.) FREEZER DRAWER REINSTALLATION CAUTION &DANGER • To avoid _ssible injury or product or property Risk of Child Entrapment damage, you will need two people to perform the • To prevent accidental child and pet entrapment following instructions. or suffocafion risk, DO NOT allow them to play inside of the freezer drawer. • DO NOT step or sit on the freezer drawer. BOTTOM DRAWER To reinstall the freezer drawer, hold the center Hook door supports (1)into rail tabs (2)_
ページ18に含まれる内容の要旨
CONNECTING THE WATER SUPPLY IMPORTANT: Read all directions thoroughly WARNING before you begin. • If operating the refrigerator before installing the Connect to safe drinking water supply water connection, turn the icemaker to the OFF position to prevent operation without water, • The water pressure must be between 21 and • All installations must be in accordance with local 121 p,sJ, (1,5~8,5 kgficm =) on models without a plumbing code requirements. water filter and between 43 and 121 ps,i, • U
ページ19に含まれる内容の要旨
CONNECTING THE WATER LINES (CONT.) • Fasten the shutoff valve to the cold water pipe • Place the free end of the tubing into a container with the pipe clamp. Be sure the outlet end is or sink, and turn on the main water supply. solidly in the 1/4-in. drilled hole in the water Flush out the tubing until the water is clear. pipe and the washer is under the pipe clamp. Turn off the shutoff valve on the water pipe. Tighten the packing nut. Tighten the pipe clamp Coil the copper tubing as shown below
ページ20に含まれる内容の要旨
LEVELING THE REFRIGERATOR DOORS WARNING CAUTION Electrical Shock Hazard • To avoid _ssible injury, or product or property damage, you will need two people to perform the • Be careful when you work with the hinges, following instructions. base grille, and stopper. You may be injured. • Do not put hands, feet, or metal items into the air vents, base grille, or the _ttom of the refrigerator. You may be injured or receive an electrical shock. Leveling After installing, secure the product with the L
