ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
Thermoelectric Wine Cooler
MODEL: AW-211ED
Please carefully read and follow all safety rules and operating instructions.
ページ2に含まれる内容の要旨
Product Diagram 1. HINGE 2. LIGHT 3. TEMPERATURE CONTROLLER 4. TEMPERATURE DISPLAY 5. FAN MASK 6.SHELVES 7. FEET 8.DOOR FRAME 9. GLASS DOOR 10. DOOR HANDLE Important Safety Instructions To reduce the risk of fire, electrical shock, or injury when using this appliance, follow these basic precautions: Read all instructions before operating the wine cooler. ATTENTION: To prevent the risk of child entrapment, do not allow children to operate, play with, or crawl inside the uni
ページ3に含まれる内容の要旨
Installation Instructions Before operating your wine cooler for the first time, follow these steps: Remove the exterior and interior packaging. Check to make sure the following parts are included: 7 slide-out shelves 1 instruction manual Before connecting the unit to a power source, allow it stand upright for approximately 2 hours. This will reduce the possibility of any system malfunctions which may have occurred from handling during transportation. Clean the interior surfac
ページ4に含まれる内容の要旨
Operating Your Wine Cooler It is recommended that the wine cooler be installed in an area where the ambient temperature is between 10-26 ۦ C (50- 80° F). If the ambient temperature is above or below the recommended ranges, the unit’s performance may be affected, and extreme cold or hot conditions may cause the interior temperature to fluctuate. This will then prevent the optimal range of 10-16 ° C (50-60° F) from being reached. In addition, keep in mind that the temperature may fluctuate
ページ5に含まれる内容の要旨
Troubleshooting To troubleshoot your wine cooler, follow the suggestions below to address the most common problems before seeking assistance from a service center: PROBLEM POSSIBLE CAUSES The wine cooler will not operate. • The unit may be plugged in using a different voltage. Also, the circuit breaker may be tripped or there is a blown fuse. The wine cooler is not cold • Check the temperature control settings, as the external enough. environment may require a higher setting. • The
