Vinotemp WINE-MATE WM-85SFCHの取扱説明書

デバイスVinotemp WINE-MATE WM-85SFCHの取扱説明書

デバイス: Vinotemp WINE-MATE WM-85SFCH
カテゴリ: 冷蔵庫
メーカー: Vinotemp
サイズ: 0.6 MB
追加した日付: 4/9/2013
ページ数: 26
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスVinotemp WINE-MATE WM-85SFCHの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Vinotemp WINE-MATE WM-85SFCHに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Vinotemp WINE-MATE WM-85SFCHをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Vinotemp WINE-MATE WM-85SFCHのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Vinotemp WINE-MATE WM-85SFCHの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Vinotemp WINE-MATE WM-85SFCH 取扱説明書 - Online PDF
Advertisement
« Page 1 of 26 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Vinotemp WINE-MATE WM-85SFCHを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Vinotemp WINE-MATE WM-85SFCHの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨



WINE-MATE Split System

Installation, Operation & Care Manual



VINO2500SSH, 4500SSH
VINO6500SSH, 8500SSH











V Vi in no ot te em mp p I In nt te er rn na at ti io on na al l C Co or rp p..

w ww ww w..w wiin ne em ma at te e..c co om m

READ AND SAVE THESE INSTRUCTIONS

ページ2に含まれる内容の要旨

TABLE OF CONTENTS Important Safety Information…..........................................2 Feature Description…………………………….……………..3 Cellar Construction.…………………………….……………..6 Installer’s Instruction…………….…..….……..……………..7 Temperature Control & Humidity Adjustment.………….15 Care Guide…………………………………………………….20 User’ Troubleshooting…….………………………………...21 Customer Support……………………………………………23 Warranty……………………………………………………….24

ページ3に含まれる内容の要旨

Important Safety Information • DO NOT USE A GROUND FAULT INTERRUPTER (GFI). • A DEDICATED 20 AMP CIRCUIT IS HIGHLY RECOMMENDED. - 2 -

ページ4に含まれる内容の要旨

Feature Description • Wine-Mate split cooling systems VINO2500-8500SSH are designed and used to provide a cold temperature between 50~65 °F for a properly insulated wine room at a normal environment. • The wine room will maintain humidity of 50~70% RH even when the environment becomes dry and humid. These temperatures and humilities are optimized for long term storage of wine. • SSH units consist of a condensing unit and an evaporator unit, and they are connected by a liquid line and

ページ5に含まれる内容の要旨

Fig. 1.1 WM25-85SFCH Evaporator Unit Fig. 1.2 WM250-450SCU Condensing Unit - 4 -

ページ6に含まれる内容の要旨

Fig. 1.3 WM650-850SCU Condensing Unit - 5 -

ページ7に含まれる内容の要旨

Cellar Construction This is only a guide and shall be considered as minimum requirements. All interior walls and floors shall have a vapor barrier and a minimum of R11 insulation. All exterior walls and ceiling shall have a vapor barrier and a minimum of R19 insulation. The vapor barrier shall be installed on the warm side of the insulation. All joints, door frames, electrical outlets or switches and any pipes or vents that go through the enclosure shall be sealed to prevent air and mo

ページ8に含まれる内容の要旨

Installer’s Instruction Federal law requires that WINE-MATE split cooling systems be installed by an EPA certified refrigeration technician. WINE-MATE split system is shipped as components and is ready for use only after a certified refrigeration technician has properly installed, charged and tested the system. Proper installation is critical. Vinotemp can only warrant the quality of the components. The installation and proper operation of the system must be warranted by the installer

ページ9に含まれる内容の要旨

1. Condensing Unit • Place the condensing units WM250-850SCU in a properly ventilated location. If it is not, heat exhausted by the condensing unit will build up and the cooling system will not operate properly. • Leave minimum 5 feet clearance for the exhaust side and leave minimum 1 foot clearance for the fresh air intake side. • Condensing unit shall be elevated to avoid possible flooding and shaded from direct sun. It shall not be exposed to temperatures higher than 110 °F or lowe

ページ10に含まれる内容の要旨

• The evaporator’s constant pressure expansion valve is set around 38- 40°F at factory. This pressure setting gives a dew point to maintain the humidity for storing wine. • The superheat at the evaporator unit shall be around 9-18°F under low and high load at 75°F ambient temperature. • Low side pressure: 33 psig • High side pressure: 130 -150 psig at 75 -90 °F ambient temperatures The line sizes and refrigerant charges are listed as follows. REFRIGERATION LIQUID SUCTION DRAIN MOD

ページ11に含まれる内容の要旨

High superheat and high subcooling restricted n. Low suction pressure and high head pressure n. Liquid line restricted before High superheat and high subcooling receiver o. low to normal suction pressure and high head pressure o. Condenser restricted High to normal superheat and high subcooling 6. Valve Operation SPINDLE BACK POSITION SPINDLE FRONT POSITION SPINDLE MIDDLE POSITION Fig. 2.2 Valve Operation Back Position: Process and manometer po

ページ12に含まれる内容の要旨

7. Electrical Wiring Fig. 2.3 VINO2500 & 4500SSH Electrical Wiring Diagram (VTSTAT) Fig. 2.4 VINO2500 & 4500SSH Wiring Diagram (DIGITAL CONTROLLER) - 11 -

ページ13に含まれる内容の要旨

Fig. 2.5 VINO6500SSH Electrical Wiring Diagram (VTSTAT) Fig. 2.6 VINO6500SSH Electrical Wiring Diagram (DIGITAL CONTROLLER) - 12 -

ページ14に含まれる内容の要旨

Fig. 2.7 VINO8500SSH Electrical Wiring Diagram (VTSTAT, UJ6220Z) Fig. 2.8 VINO8500SSH Wiring Diagram (DIGITAL CONTROLLER, UJ6220Z) - 13 -

ページ15に含まれる内容の要旨

8. Use of the adjustable low pressure control (if applicable) Cut out = 5 psig; Cut in = 25 psig; Differential = 20 psig; It may need to adjust the setting in the field to get the right cycle time. Fig. 2.9 Adjustable Low Pressure Control 9. Condensing Unit Troubleshooting Unit not running a. Incorrect power supply a. Check for proper voltage b. Incorrect or loose wirings b. Check all wirings and connections c. Failed components c. Check start relay, start capacitor, overload

ページ16に含まれる内容の要旨

Temperature Control & Humidity Adjustment 1. Temperature Setting • Set the temperature at 55 °F for the optimum aging of wine • On initial start-up, the time required to reach the desired temperature will vary, depending on the quantity of bottles, temperature setting and surrounding temperature. • Allow 24 hours to stabilize the temperature for each new temperature setting operation 2. Use of the VTSTAT controller NOTE: Use the dial number for “Medium Temp” Fig. 3.1

ページ17に含まれる内容の要旨

Dip-switch description (See detail in VSTAT instruction ) 1, 2 differential: added to the Set Point, establishes the temperature threshold, measured by the regulation probe, beyond which the compressor is activated; 3 compressor safety function: OFF - function disabled; ON - function enabled; 4 temperature display: OFF - displayed in °C; ON - displayed in °F; 5,...,8 duration of defrost/defrost termination temperature: if the defrost sensor is utilized, these dip-switches select the defro

ページ18に含まれる内容の要旨

If the function is enabled, the compressor is not energized for three minutes after controller power up. The function is also active in hot-gas defrost mode. 5) LED & Display Messages 1. LED off 1. Compressor and defrost deactivated 2. LED on 2. Compressor energized 3. LED blinking 0.5s on/0.5s off 3. Defrost activated 4. LED blinking 0.5s on/1.5s off 4. Sensor fault 5. Display A1 5. Regulation probe fault 6. Display A2 6. Defrost probe fault 3. Use of the Digital Controller F

ページ19に含まれる内容の要旨

2) Alarm Signals 2.1 Code Description 2.2 Alarm Recovery Probe alarms P1”, start a few seconds after the fault in the related probe; they automatically stop a few seconds after the probe restarts normal operation. Check connections before replacing the probe. Temperature alarms “HA”, “LA” automatically stops as soon as the temperature returns to normal value. Alarm “CA” (with i1F=PAL) recovers only by switching off and on the instrument. 3) Temperature Set-Point 3.1 How to s

ページ20に含まれる内容の要旨

2. The value of the set point will be displayed and the “°C” or “°F” LED starts blinking; 3. To change the Set value, push the o or n arrows within 10s. 4. To memorize the new set point value, push the SET key again or wait 10s. 4) Humidity Adjustment The parameter Fon is used to adjust the humidity in the wine cabinet. The higher value of Fon, the higher relative humidity will be. 1. Press the Set + keys for 3 sec until the “°C” or “°F” LED starts blinking. 2. Release the keys, then


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Vinotemp 700 取扱説明書 冷蔵庫 0
2 Vinotemp SC-1 取扱説明書 冷蔵庫 10
3 Vinotemp Portofino 取扱説明書 冷蔵庫 2
4 Vinotemp TC32G 取扱説明書 冷蔵庫 0
5 Vinotemp BC-58 取扱説明書 冷蔵庫 0
6 Vinotemp SC-130N 取扱説明書 冷蔵庫 0
7 Vinotemp VINO1500CD 取扱説明書 冷蔵庫 0
8 Vinotemp V5LR 2009 取扱説明書 冷蔵庫 0
9 Vinotemp VinoCave Series 取扱説明書 冷蔵庫 6
10 Vinotemp VINO6500HZD 取扱説明書 冷蔵庫 0
11 Vinotemp VINO2500CD 取扱説明書 冷蔵庫 0
12 Vinotemp VINO1500CTED 取扱説明書 冷蔵庫 0
13 Vinotemp VINO4500HZD 取扱説明書 冷蔵庫 0
14 Vinotemp VINO2500CTED 取扱説明書 冷蔵庫 0
15 Vinotemp VT-12TEDi 取扱説明書 冷蔵庫 1
16 2JANE Surround Sound System HTS-GS1 取扱説明書 冷蔵庫 4
17 3Com Phaser 7750 取扱説明書 冷蔵庫 1
18 3Com iQ 10 取扱説明書 冷蔵庫 0
19 3Com PowerDual iQ 10 iQ 10C 取扱説明書 冷蔵庫 1
20 3Com PowerDual iQ 10 iQ 10P 取扱説明書 冷蔵庫 2