ページ1に含まれる内容の要旨
Slim 3-CD Stereo
Instructions/ Warranty
SA248
ページ2に含まれる内容の要旨
Instructions Slim 3-CD Stereo FCC Information For CD player section. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by manufacturer may void the user’s authority to operate this equipment. Note: This equipment has been teste
ページ3に含まれる内容の要旨
Do not use in areas where extremes in temperature occur (below 40°F/5°C or exceeding 95°F/35°C), or where unit may be exposed to direct sunlight. Because of the CD player’s extremely low noise and wide dynamic range, there is a tendency to turn the volume on the amplifier higher than necessary. Doing so may produce an excessively high output from the amplifier, which can cause damage to the speakers. Sudden changes in the surrounding temperature can cause dew to form on the optical pickup lens i
ページ4に含まれる内容の要旨
Location of Stereo Controls 1. Moodlight 2. CD player 1 3. CD player 2 4. CD door 5. CD player 3 SA248
ページ5に含まれる内容の要旨
6. MEMORY/PROGRAM — programs AM/FM stations and CD tracks 7. STEREO/MONO — selects mono or stereo for FM stations 8. PRESET — accesses preset radio stations 9. CLOCK SET — sets clock 10. DYNAMIC BASS — turns BassXpander on and off 11. SURROUND — turns surround sound on and off 12. TREBLE — adjusts treble sound level 13. BASS — adjusts bass sound level 14. MOODLIGHT — turns moodlight on and off 15. CD SELECTOR — selects which CD plays 16. LINE IN/OUT — selects line-in or line-out while in line se
ページ6に含まれる内容の要旨
19. REPEAT — repeats one CD track, one CD or all CDs 20. TUNER BAND — selects AM or FM 21. BACKLIGHT — turns LCD backlight on and off 22. SUREWAKE — turns SureWake on and off 23. STOP — stops CD play 24. PLAY/PAUSE — begins or pauses CD play 25. VOLUME KNOB — adjusts volume 26. CD-TUNER-SKIP forward — skips/searches CD track forward, scans radio stations upward, advances time while setting clock or timer 27. CD-TUNER-SKIP backward — skips/searches CD track backward, scans radio stations down- w
ページ7に含まれる内容の要旨
38. Carrying recess 39. Slot for wall-mounting bracket — connects to mounting bracket to mount unit on wall 40. FM antenna terminal — terminals for connecting single antenna (75Ω) or dipole antenna (300Ω) 41. Stand — opens to support main unit for desktop use 42. Left and right channel speaker terminals — inputs for speaker cables 43. Battery compartment — holds batteries for clock backup 44. Subwoofer jack — connects to optional external subwoofer (model SA249) 45. AC socket — connects to AC po
ページ8に含まれる内容の要旨
Remote Control Functions 1. POWER/STANDBY —- turns power on or off (standby mode) 2. NUMBERS — selects AM/FM preset stations or CD tracks 3. INTRO — plays first 10 seconds of each track 4. REPEAT — repeats one CD track, one CD or all CDs 5. PRESET — retrieves preset radio stations 6. STOP — stops CD play 7. 3 CD selection — chooses CD 8. MEMORY — programs CD tracks 9. TUNER — selects AM/FM tuner mode 10. STEREO/MONO — selects mono or stereo for FM stations 11. BASS — adjusts bass sound level 12.
ページ9に含まれる内容の要旨
23. REMAIN/MODE — changes display from elapsed CD track time to remaining track time or entire CD time (in CD mode), clock, or AM/FM station (in Tuner mode) 24. SLEEP — selects auto shutoff sleep mode (120 min., 90 min., 60 min., 30 min.) 25. SNOOZE — stops play for about 10 minutes 26. TREBLE — adjusts treble sound level 27. SURROUND — turns surround sound on and off Connecting Speakers Attach left and right speakers to center section by inserting speaker pegs into holes on both sides of cente
ページ10に含まれる内容の要旨
Setting Clock 1. Open CD doors by pressing CD DOOR OPEN/CLOSE. 2. Press CLOCK SET once. Hour number will flash. 3. Use CD-TUNER-SKIP buttons to select the desired hour. 4. Press CLOCK SET again. Minutes number will flash. 5. Use CD-TUNER-SKIP buttons to select the desired minutes. 6. Press CLOCK SET again to set time. Numbers will stop flashing. Playing CDs Normal Play 1. Open CD doors by pressing CD DOOR OPEN/CLOSE. 2. Load up to 3 CDs on spindles with information side facing stereo. Discs can
ページ11に含まれる内容の要旨
7. Repeat steps 3-6 to program additional tracks (up to 63 tracks). 8. Press MEMORY again until track for P-01 is displayed on LCD. Press MEMORY again to review programmed tracks. 9. Press PLAY/PAUSE to play programmed tracks. Press CD-TUNER-SKIP buttons to skip forward or backward through programmed tracks. Press STOP twice, open CD door or turn off power to erase programmed tracks. If stereo is switched to tuner during programmed CD play, stereo will resume programmed play when PLAY/PAUSE is
ページ12に含まれる内容の要旨
Storing Stations in Memory Stereo can store up to 20 FM and 20 AM stations. 1. Select desired radio station. 2. Press MEMORY. “MEMORY” indicator flashes on LCD. 3. Press PRESET to assign preset number. For example, to store a radio station on preset #9, press PRESET nine times until LCD displays #9 as preset number. 4. Press MEMORY to store selection. “MEMORY” indicator will stop flashing. 5. Repeat steps 1-4 to store additional radio stations in memory. Selecting a Preset Station In tuner mode
ページ13に含まれる内容の要旨
Stereo can be left on or in standby. When timer goes off, stereo will play the previously selected radio station or selected CD track. To disable timer, press TIMER again. Timer on and off setting will be stored in memory for future use. Press TIMER again to activate. SureWake SureWake allows you to adjust the volume to any level without affecting the wake-up volume. SureWake plays music quietly during wake-up, then slowly increases the volume to ensure that you are awake. 1. Activate the timer
ページ14に含まれる内容の要旨
CD door does not completely open • Make sure speaker grills are pressed flush to speakers. No display • Check power plug. No sound • Check speaker connections. • Sound will not play from speakers if headphones are plugged in. If no sound comes out of head- phones, make sure they have been plugged in correctly. • Make sure snooze function is not activated. Static or weak radio reception • Make sure antennas have been connected correctly. SA248
ページ15に含まれる内容の要旨
WARRANTY What Is Covered This warranty covers any defects in materials or workmanship, with the exceptions stated below. How Long Coverage Lasts This warranty runs for 90 days from the date of original purchase. What Is Not Covered This warranty does not cover damage caused by misuse or use other than as intended and described in the product instruction manual, or loss or damage to batteries or removable parts. What The Sharper Image Will Do The Sharper Image will repair any defects in material
