ページ1に含まれる内容の要旨
3D0804193A
Z
AD-RW900
CD Recorder/Reverse Cassette Deck
OWNER’S MANUAL
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT 5) Do not use this apparatus near water. REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS 6) Clean only with dry cloth. INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install ne
ページ3に含まれる内容の要旨
< Do not expose this apparatus to drips or splashes. For U.S.A. < Do not place any objects filled with liquids, such as vases, on the apparatus. This equipment has been tested and found to comply with the < Do not install this apparatus in a confined space such as a book limits for a Class B digital device, pursuant to Part 15 of the FCC case or similar unit. Rules. These limits are designed to provide reasonable protection < The apparatus draws nominal non-operating power from the AC agai
ページ4に含まれる内容の要旨
For European customers Disposal of electrical and electronic equipment (a) All electrical and electronic equipment should be disposed of separately from the municipal waste stream via collection facilities designated by the government or local authorities. (b) By disposing of electrical and electronic equipment correctly, you will help save valuable resources and prevent any potential negative effects on human health and the environment. (c) Improper disposal of waste electrical and electron
ページ5に含まれる内容の要旨
Contents What You Can Do with This Unit Thank you for choosing this TEAC product. Read this manual Playback carefully to get the best performance from this unit. CD/CD-R/CD-RW What You Can Do with This Unit ..................................5 (Audio CD/MP3/WMA disc) Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
Before Use < When the unit is turned on, if a TV is turned on nearby lines might What’s in the box appear on the TV screen depending on the frequency of the TV Confirm that the standard accessories are included. broadcast. This is not a malfunction of the unit or the TV. If you see such lines, move the unit and the TV further apart. Remote control unit (RC-1283) x 1 Beware of condensation When the unit is moved from a cold to a warm place, or used after a sudden temperature change, there is
ページ7に含まれる内容の要旨
Discs (1) Discs that can be played by this unit Please use CD, CD-R and CD-RW discs bearing the “DIGITAL AUDIO” mark. CDs (12-cm and 8-cm) that bear the “COMPACT disc DIGITAL CD AUDIO” logo can be played by this unit. < The logo should be on the disc label or the CD jacket. CD-R CD-RW CD-R and CD-RW discs that have been correctly recorded in the audio CD format and finalized, as well as finalized CD-R and CD-RW discs that contain MP3 or WMA files, can be played by this unit. This unit can p
ページ8に含まれる内容の要旨
Discs (2) USB Flash Drives Handling precautions CAUTION Never turn the unit off or disconnect a USB flash drive when < Always place the disc on the disc tray with the label side up. Only it is being accessed, for example, during writing, playback, one side of a Compact Disc can be played or used for recording. recording or the erasure of files. Doing so could damage the AD-RW900 and the connected USB < Do not touch the signal side (the unlabeled side). flash drive. Fingerprints, oils an
ページ9に含まれる内容の要旨
MP3 Files Cassette Tapes (1) This unit can play MP3 files that are on CD-R/CD-RW discs and external Tape types USB flash drives. There are several types of cassette tapes. < This unit can play back mono and stereo MP3 files that are in the Cassette tapes that can be played by this unit MPEG-1 Audio Layer 3 format with a sampling rate of 16-48 kHz and a bit rate of 320 kbps or less. Normal (type ) Chrome (type ) Metal (type ) < This unit is not compatible with discs that have been recorded
ページ10に含まれる内容の要旨
Cassette Tapes (2) Connections Automatic tape type detection function Voltage Selection This cassette deck can detect what type of tape is being used based (General export/North America models only) on the detection holes in the cassette shell. Be sure to use cassettes with detection holes. Be sure to remove the power cord from the AC outlet before changing the position of the voltage selector switch. Automatic tape type ( ) Metal Type detection holes ( ) Chrome Type ( ) Normal Typ
ページ11に含まれる内容の要旨
USB cable Optical digital cable RCA cables RCA cables AD-RW900 (back side) D E F A B C Wall socket Computer CD Player, Ampli er Turntable MD Deck, etc. DIGITAL OUT REC PLAY (OUT) (IN) TAPE/MD/CD-R D DIGITAL IN terminal [DIGITAL IN] After all connections are complete, connect the power cord’s plug to the AC wall socket. To record digital audio signals, connect this terminal to the digital output terminal of a digital device such as a CD player with a commercially available optical digital ca
ページ12に含まれる内容の要旨
Identifying the Parts (Main Unit) 1 2 3 4 5 6 7 8 9 10 11 12 13 34 33 32 31 30 29 28 27 26 26 25 24 23 22 21 20 19 18 17 Display RECORD USB 1 10 See “Display” on pages 16-18. Use to record to an external USB flash drive. Press it once to enable recording standby, and press it again to start recording Remote sensor 2 (pages 39-40). When operating the remote control, point it towards here. Press it during recording to divide the file at that point (page 41). (When recording from a CD, howeve
ページ13に含まれる内容の要旨
Stop ( ) 25 H Press this button to stop CD playback. 14 Press this button also to stop recording to CD. Skip (/)/Search (,) 26 Auto (AUTO) When in USB mode, press this button to skip to the next track. Press and hold this button during playback to search forward. When recording to a CD, press this button to change how numbers are added to tracks (page 31). Skip ( )/Search ( ) 27 . m Sync (SYNC) When in USB mode, press this button to skip to the previous track. Press and hold this
ページ14に含まれる内容の要旨
Identifying the Parts (Remote Control Unit) DISPLAY A Press this button to change the display information (pages 16-18). SOURCE B Use this button to select a source (page 19). PROGRAM C Use this button to program tracks/files (pages 25-27). CLEAR D Use this button to clear programmed tracks/files (page 27). REPEAT E E Use this button to set the repeat function (page 24). F A SHUFFLE F B Use this button to start shuffle playback (page 24). C G FOLDER ( / ) G D Use these
ページ15に含まれる内容の要旨
Remote Control Unit (1) The included remote control allows this unit to be operated from a I distance. Skip ( / )/Search ( / ) ./ m, When using the remote control, point it towards the remote sensor on Press these buttons to skip through files. the front panel of the main unit. Hold down these buttons during playback to search for a part of a file. < Even if the remote control unit is used within its effective range, operation by remote control might not be possible if there are any ( ) R
ページ16に含まれる内容の要旨
Remote Control Unit (2) Display (1) Precautions concerning batteries CD mode Misuse of batteries could cause them to rupture or leak leading During playback to fire, injury or the staining of nearby things. Please read and Audio CD observe the following precautions carefully. Elapsed time of current track (min./sec.) < Be sure to insert the batteries with correct positive (+) and negative (_) orientations. < Use batteries of the same type. Never use different types of batteries together. Cur
ページ17に含まれる内容の要旨
(Example: Recording from a file of more than 100 minutes in TAPE mode length) Tape counter Current folder Current file Elapsed time of current number number file (hr./min./sec.) USB mode (Example: Recording on a CD from a cassette tape) During playback Recording source Recording indicator Currently playing file number (starting with 001 in each folder) Number of Elapsed time Tape counter track being (min:sec) of track Currently playing folder number recorded being recorded Elapsed time of cu
ページ18に含まれる内容の要旨
LINE IN PHONO Display (2) Basic Operation Changing the display (CD/USB mode) Turning the unit on or off During playback in CD mode or USB mode, each time the DISPLAY Press the POWER button to turn the unit on or off. button is pressed, the display changes as follows: When the unit turns on, the display lights. Check the POWER ON START switches that determine what the Audio CD unit does when the power is turned on. Remaining time of current track (min./sec.) Total elapsed time o
ページ19に含まれる内容の要旨
Selecting a source for playback/recording Listening with headphones Each time the SOURCE button is pressed, the source changes as To listen with headphones, turn the LEVEL knob to minimize the follows: volume level before connecting the headphones plug to the PHONES jack. Then, adjust the volume after connecting the plug. LINE IN PHONO IN CAUTION Do not connect headphones to the PHONES jack while The selected source is shown on the upper left of the display wearing them. Moreover, do not d
ページ20に含まれる内容の要旨
Listening to a CD Press the SOURCE button repeatedly to select “CD”. Press the CD OPEN/CLOSE (L) button again to close the 1 4 tray. CAUTION Be careful not to let your finger be pinched by the tray. Loading a disc takes a few seconds. < When a different source is selected, pressing the CD Play/Pause During loading, “READING” appears on the display and no (t/J) button automatically selects the CD and, if a disc is buttons will work. Wait until the total number of tracks/files is loaded, st
