ページ1に含まれる内容の要旨
CD RECEIVER KD-S34
RECEPTOR CON CD KD-S34
For canceling the display demonstration, see page 7.
Para cancelar la demostración en pantalla, consulte la página 7.
For installation and connections, refer to the separate manual.
For customer Use:
Para la instalación y las conexiones, refiérase al manual separado.
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet. Retain
this information for future
reference.
INSTRUCTIONS
Model No.
MANUAL DE INSTRUCC
ページ2に含まれる内容の要旨
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate
ページ3に含まれる内容の要旨
The following marks are used to indicate... CONTENTS : Built-in CD player operations. : External CD changer operations. Control panel .................................. 4 : Indicator displayed for the Remote controller — RM-RK50 ............. 5 corresponding operation. Getting started ................................ 6 Basic operations ................................................... 6 How to reset your unit Radio operations ............................. 7 Disc operations ...............
ページ4に含まれる内容の要旨
Control panel Parts identification Display window 1 SRC (source) button i 4 /¢ buttons o AUX (auxiliary) input jack 2 B BAND button 3 (standby/on attenuator) button / ; S.BASS (super bass) indicator a Playback source indicators— Control dial 4 SEL (select) button CH: Lights up only when CD-CH is selected as the 5 Display window playback source. DISC: Lights up for the built-in CD player. 6 5 (up) / ∞ (down) buttons 7 EQ (equalizer) button s Disc information indicators— 8 Remote sensor TAG
ページ5に含まれる内容の要旨
Main elements and features Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) For USA-California Only: 1 (standby/on/attenuator) button This product contains a CR Coin Cell Lithium Battery • Turns the power on if pressed briefly or which contains Perchlorate Material—special attenuates the sound when the power is on. handling may apply. • Turns the power off if pressed and held. See www.dtsc.ca.gov/hazardouswaste /perchlorate 2 5 U (up) / D (down) ∞ buttons • Chan
ページ6に含まれる内容の要旨
5 SOURCE button ! • Selects the source. 6 2 R (reverse) / F (forward) 3 buttons • Searches for stations if pressed briefly. • For FM/AM tuner • Fast-forwards or reverses the track if pressed and held. • Changes the tracks if pressed briefly. • While listening to the satellite radio: • For SIRIUS radio – Changes the channels if pressed briefly. – Changes the channels rapidly if pressed and held. • For XM radio • While listening to an iPod or a D. player (in menu selecting mode): – S
ページ7に含まれる内容の要旨
! Start searching for a station. Basic settings • See also “General settings — PSM” on pages 12 – 14. When a station is received, searching stops. To stop searching, press the same button 1 again. 2 To tune in to a station manually In step ! above... 1 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the 2 Select a desired station frequency. minute. 3 Fini
ページ8に含まれる内容の要旨
Storing stations in memory Listening to a preset station You can preset six stations for each band. 1 FM station automatic presetting — 2 Select the preset station (1 – 6) you want. SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) you want to or store into. 2 To check other information while listening to the radio 3 Clock = Station name* = Frequency = (back to the beginning) “SSM” flashes, then disappears when automatic * If no title is assigned to a station, “N
ページ9に含まれる内容の要旨
To fast-forward or reverse the track Playing discs in the CD changer All discs in the magazine will be played repeatedly until you change the source. • Ejecting the magazine will also stop playback. To go to the next or previous tracks ~ * If you have changed the external input setting To go to the next or previous folders (only for to “EXT IN” (see page 14), you cannot select the MP3 or WMA discs) CD changer. For MP3 discs: Ÿ Select a disc. For WMA discs: For disc number from 01 – 06: For
ページ10に含まれる内容の要旨
Other main functions Changing the display information Skipping tracks quickly during play While playing an audio CD or a CD Text Only possible on JVC MP3-compatible CD changer • For MP3 or WMA discs, you can skip tracks within the same folder. 2 * While playing an MP3 or a WMA disc Ex.: To select track 32 while playing a track whose number is a single digit (1 to 9) • When “TAG DISP” is set to “TAG ON” (see page 14) 1 2 • When “TAG DISP” is set to “TAG OFF” Each time you press the butto
ページ11に含まれる内容の要旨
Selecting the playback modes Sound adjustments You can use only one of the following playback modes You can select a preset sound mode suitable to the at a time. music genre (iEQ: intelligent equalizer). 1 2 Select your desired playback mode. Preset values 7 Repeat play 1 2 3 4 BAS* MID* TRE* S.BS* Indication (For) Mode Plays repeatedly USER TRK RPT : The current track. 00 00 00 OFF (Flat sound) 1 FLDR RPT* : All tracks of the current folder. ROCK +03 00 +02 ON 2 DISC RPT* : All tracks of t
ページ12に含まれる内容の要旨
4 * This adjustment will not affect the subwoofer output. Adjusting the sound 5 * Range adjustment for super bass is adjustable only when it is set to “S.BS ON.“ You can adjust the sound characteristics to your 6 * Depending on the amplifier gain control setting. (See preference. page 14 for details.) 1 General settings — PSM 2 You can change PSM (Preferred Setting Mode) items (except “SID”) listed in the table on pages 13 and 14. 1 Indication, [Range] 2 Select a PSM item. 2 BAS* (bass),
ページ13に含まれる内容の要旨
Indications Item Setting, [reference page] ( : Initial) DEMO • DEMO ON : Display demonstration will be activated automatically if no Display operation is done for about 20 seconds, [7]. demonstration • DEMO OFF : Cancels. 1 CLK DISP* • ON : Clock display is shown on the display even when the power is Clock display turned off. • OFF : Cancels; pressing D DISP will show the clock time for about 5 seconds when the power is turned off, [7]. CLOCK H 1 – 12 [Initial: 1 (1:00)], [7]. Hour adj
ページ14に含まれる内容の要旨
Indications Item Setting, [reference page] ( : Initial) 5 SCROLL* • ONCE : Scrolls the disc information once. Scroll • AUTO : Repeats scrolling (at 5-second intervals). • OFF : Cancels. • Pressing D DISP for more than one second can scroll the display regardless of the setting. L/O MODE • REAR : Select if both the LINE OUT terminals are used for connecting the Line output speakers (through an external amplifier). mode • WOOFER : Select if the REAR LINE OUT terminals are used for conn
ページ15に含まれる内容の要旨
To erase the entire title Title assignment In step 2 on the left... You can assign names to 30 station frequencies (FM and AM) and up to 8 characters for each station name. 1 Select FM/AM. Satellite radio operations This unit is satellite (SAT) Radio Ready—compatible with both SIRIUS Satellite radio and XM Satellite radio. Before operating your satellite radio: 2 Show the title entry screen. • For connection, see Installation/Connection Manual (separate volume). • Refer also to the Instructio
ページ16に含まれる内容の要旨
3 Check your XM Satellite radio ID labelled on Activate your SIRIUS subscription after TM the casing of the XMDirect Universal Tuner connection: Box, or tune in to “Channel 0” (see page 17). 1 4 Contact XM Satellite radio on the internet at to activate your subscription, or you can call 2 1-800-XM-RADIO (1-800-967-2346). Once completed, the unit tunes in to one of the available channels (Channel 4 or higher). JVC DLP starts updating all the SIRIUS cha
ページ17に含まれる内容の要旨
In Channel Search, channel name and channel Listening to the XM Satellite radio number appear on the display during search. 1 • While searching, invalid and unsubscribed channels are skipped. Checking the XM Satellite radio ID 2 While selecting “XM1,” “XM2,” or “XM3,” select “Channel 0.” 3 Select a channel for listening. The display alternately shows “RADIO ID” and the Holding the button changes the channels rapidly. 8-digit (alphanumeric) ID number. To cancel the ID number display, sel
ページ18に含まれる内容の要旨
Preparations: 3 Select the preset channel (1 – 6) you want. Make sure “CHANGER” is selected for the external input setting, see page 14. ~ To change the display information while listening to a channel Ÿ Clock = Category name = Channel name = Playback starts automatically from where it has Artist name = Composer name* = Song/ 1 2 been paused* or stopped* previously. program name/title = (back to the beginning) ! Adjust the volume. * Only for SIRIUS Satellite radio. iPod / D. player opera
ページ19に含まれる内容の要旨
Selecting a track from the menu Selecting the playback modes 1 Enter the main menu. 1 Now the 5/∞/ 4 /¢ buttons work 2 Select your desired playback mode. as the menu selecting buttons*. 7 Repeat play * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. ONE RPT – When you confirm the selection of a track. Functions the same as “Repeat One” of the iPod or “Repeat Mode = One” for the D. player. 2 Select the desired menu. ALL RPT Functions the same as
ページ20に含まれる内容の要旨
Ÿ Turn on the connected component and Other external component start playing the source. operations ! Adjust the volume. You can connect an external component to... • CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied) for any other components (except iPod and D. player). • AUX (auxiliary) input jack on the control panel. ⁄ Adjust the sound as you want. (See pages 11 and 12.) For connection, see Installation/Connection M
