Audiovox CDI-100Rの取扱説明書

ページ1に含まれる内容の要旨

INSTALLATION GUIDE FOR:
Model : CDI-100R
ISO-DINMOUNTCDCHANGER
CONTROLLER / FM MODULATOR
FormNo.128-5260
PARTSLIST
Quantity
Item Description ADJUSTMENT OF FM OUTPUT FREQUENCY
1 CDI-100 CDC Controller 1
The output frequency of the CDI-100R is factory set to
2 M4 x .8P x 8mm 4
89.1 MHz. If there is interference from a local station on
3 M5 x .8P x 8mm 4
89.1MHz.,theoutputfrequencyoftheCDI-100Rcanbe
4 ISO-DIN Trim Ring 1
changedto88.7MHz.byslidingtheswitchonthebottom
of the chassis to the "88.7 MHz

ページ2に含まれる内容の要旨

FUSE5A FUSE2A Fig.1 FACTORYRADIO/CDI-1OORASSEMBLY FRONT VIEW FACTORY RADIO BRACKET (TYPICAL) FACTORY RADIO (TYPICAL) FACTORY SUPPLIED RADIO MOUNTING SCREWS ALIGN FRONT OF CDI-100R WITH FRONT OF FACTORY RADIO CDI-100R CDI-100R MOUNTING SCREWS (ITEM #2 or #3) AUDIO LEVEL ADJUSTMENT (ON BOTTOM OF CHASSIS) FREQUENCY SWITCH (ON BOTTOM OF CHASSIS) FACTORYRADIO/CDI-1OORASSEMBLY Fig.2 REARVIEW FACTORY RADIO POWER/SPEAKER CONNECTOR (LOCATION AND TYPE WILL VARY) GROUND (BLACKw/WHITESTRIPE) TO +12 VOLTS SW