ページ1に含まれる内容の要旨 
                    
                        CD RECEIVER
CD-RECEIVER
РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ
KD-G722/KD-G721
 For canceling the display demonstration, see page 7.
 Zum Abbrechen der Displaydemonstration siehe Seite 7.
 Информацию об отмене демонстрации функций дисплея см. на стр. 7.
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Указания по установке и выполнению соединений приводятся в отдельной инструкции.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
                    
                    ページ2に含まれる内容の要旨 
                    
                        Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to  obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave  all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.  Avoid direc
                    
                    ページ3に含まれる内容の要旨 
                    
                         How to read this manual CONTENTS • Button operations are mainly explained with  the illustrations in the table below. • Some related tips and notes are explained in  Control panel — KD-G722 and KD-G721 ......... 4 “More about this unit” (see pages 22 – 25). Remote controller — RM-RK50 ............... 5 Getting started ................................. 7 Press briefly. Basic operations .................................................... 7 Radio operations .............................. 8 Press 
                    
                    ページ4に含まれる内容の要旨 
                    
                        Control panel — KD-G722 and KD-G721 Parts identification 1 BAND button 9 USB (Universal Serial Bus) input terminal 2 • Control dial p SRC (source) button  •  (standby/on attenuator) button q  (control panel release) button 3 DISP (display) button w SEL (select) button 4 Remote sensor e MODE button  • DO NOT expose the remote sensor to r EQ (equalizer) button strong light (direct sunlight or artificial t MO (monaural) button lighting). y SSM (Strong-station Sequential Memory)  5 Display window bu
                    
                    ページ5に含まれる内容の要旨 
                    
                        Display window a Track information indicators—TAG (ID3 l Tracks type indicators*—WMA, MP3 Tag),  (track/file),  (folder) / Playback source indicators*—CH (CD  s Tuner reception indicators—ST (stereo), changer), DISC (built-in CD player) MO (monaural) z EQ (equalizer) indicator d RDS indicators—TP, PTY, AF, REG x Sound mode (C-EQ: custom equalizer)  f Main display indicators—USER, ROCK, CLASSIC,  g Tr (track) indicator POPS, HIP HOP, JAZZ h LOUD (loudness) indicator •  also works as the time coun
                    
                    ページ6に含まれる内容の要旨 
                    
                         • Changes the folder of the MP3/WMA/ Warning:  USB. • Do not install any battery other than   • While playing an MP3 disc on an  CR2025 or its equivalent; otherwise, it may  MP3-compatible CD changer: explode.  – Changes the disc if pressed briefly. • Store the battery in a place where children   – Changes the folder if pressed and held. cannot reach to avoid risk of accident.  • While listening to an Apple iPod or a  ® • To prevent the battery from over-heating,  JVC D. player: cracking, or st
                    
                    ページ7に含まれる内容の要旨 
                    
                        To drop the volume in a  Getting started moment (ATT) To restore the sound,  Basic operations  press it again. ~ Turn on the power. To turn off the power Ÿ  Basic settings • See also “General settings — PSM” on pages  16 – 18. 1  2    * You cannot select these sources if they  are not ready or not connected. !  1 Canceling the display  demonstrations Select “DEMO,” then “DEMO OFF.” For FM/AM tuner 2 Setting the clock Select “CLOCK H” (hour), then adjust  the hour. For DAB tuner Select “CLOCK M” 
                    
                    ページ8に含まれる内容の要旨 
                    
                        When an FM stereo broadcast is hard to  Radio operations receive ~  Lights up when monaural mode is activated. Ÿ Reception improves, but stereo effect will be  Lights up when receiving an FM stereo  lost. broadcast with sufficient signal strength. To restore the stereo effect, repeat the same  procedure. “MONO OFF” appears and the MO  indicator goes off. Selected band appears. ! Start searching for a station. Storing stations in memory You can preset six stations for each band.  FM station autom
                    
                    ページ9に含まれる内容の要旨 
                    
                         Manual presetting FM RDS operations Ex.: Storing FM station of 92.5 MHz into preset  number 4 of the FM1 band. What you can do with RDS RDS (Radio Data System) allows FM stations  1  to send an additional signal along with their  regular programme signals. By receiving the RDS data, this unit can do the  2  following: • Programme Type (PTY) Search (see the  following) • TA (Traffic Announcement) and PTY  Standby Receptions (see pages 10 and 16) Preset number flashes for a while. 3  • Tracing th
                    
                    ページ10に含まれる内容の要旨 
                    
                        4 Finish the procedure. ! Start searching for your favorite  programme. If there is a station broadcasting a  Using the standby receptions programme of the same PTY code as you  have selected, that station is tuned in.  TA Standby Reception TA Standby Reception allows the unit to switch  PTY codes temporarily to Traffic Announcement (TA)  NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,  from any source other than AM. SCIENCE, VARIED, POP M (music), ROCK M (music), EASY  The volume changes t
                    
                    ページ11に含まれる内容の要旨 
                    
                        • If the PTY indicator flashes, PTY Standby  Reception is not yet activated. Disc/USB memory   To activate PTY Standby Reception, tune in  to another station providing these signals. The operations PTY indicator will stop flashing and remain  lit. Playing a disc in the unit  To deactivate the PTY Standby Reception,  All tracks will be played repeatedly until you  select “OFF” for the PTY code (see page 16).  change the source or eject the disc. The PTY indicator goes off. Tracing the same progra
                    
                    ページ12に含まれる内容の要旨 
                    
                        About MP3 and WMA tracks Playing from a USB memory  MP3 and WMA “tracks” (words “file” and  This unit can play MP3/WMA tracks stored in a  “track” are used interchangeably) are recorded  USB memory. in “folders.” All tracks in the USB memory will be played  repeatedly until you change the source. About the CD changer • Removing the USB memory will also stop  It is recommended to use a JVC  playback. MP3-compatible CD changer with your unit. • You can also connect MP3-incompatible  ~  CD changers
                    
                    ページ13に含まれる内容の要旨 
                    
                        To locate a particular track (for CD) or folder  2  (for MP3/ WMA/USB) directly Each time you press the button, you can  To select a number from 01 – 06: skip 10 tracks. • After the last track, the first track will be  selected and vice versa. To select a number from 07 – 12: 3  • To use direct folder access on MP3/WMA/  Prohibiting disc ejection USB, it is required that folders are assigned  You can lock a disc in the loading slot. with 2-digit numbers at the beginning of their  folder names—01
                    
                    ページ14に含まれる内容の要旨 
                    
                        Changing the display information Selecting the playback modes You can use only one of the following playback  modes at a time.  While playing an audio CD or a CD Text 1  2 Select your desired playback mode. 7 Repeat play 2 *  While playing an MP3/WMA disc or a  USB memory • When “TAG DISP” is set to “TAG ON”  (see page 18) Mode Plays repeatedly TRK RPT : The current track.  4 FLDR RPT* : All tracks of the current  folder.  5 DISC RPT* : All tracks of the current disc.  RPT OFF : Cancels. • When 
                    
                    ページ15に含まれる内容の要旨 
                    
                        Indication, [Range] Sound adjustments 1 BAS* (bass), [–06 to +06] You can select a preset sound mode suitable to Adjust the bass. the music genre (C-EQ: custom equalizer). 1 TRE* (treble), [–06 to +06] Adjust the treble. 1  2 FAD* (fader), [R06 to F06] Adjust the front and rear speaker balance.  2 BAL (balance), [L06 to R06] Adjust the left and right speaker balance.  1 LOUD* (loudness), [LOUD ON or  LOUD OFF] Preset values Boost low and high frequencies to produce a  BAS TRE LOUD well-balanced 
                    
                    ページ16に含まれる内容の要旨 
                    
                        General settings — PSM You can change PSM (Preferred Setting Mode)  3 Adjust the PSM item selected. items listed in the table that follows. 1  2 Select a PSM item. 4 Repeat steps 2 and 3 to adjust the  other PSM items if necessary. 5 Finish the procedure. Indications Selectable settings, [reference page] DEMO DEMO ON : [Initial]; Display demonstration will be activated   Display demonstration automatically if no operation is done for about  20 seconds, [7]. DEMO OFF : Cancels. CLOCK H 0 – 23 (1 
                    
                    ページ17に含まれる内容の要旨 
                    
                        Indications Selectable settings, [reference page] 1 TA VOL [Initial: VOL 15]; VOL 00 — VOL 30 or 50* , [10]  Traffic announcement  volume P-SEARCH ON : Using the AF data, the unit tunes in to another frequency   Programme search broadcasting the same programme as the original  preset RDS station is if the preset station signals are not  sufficient. OFF : [Initial]; Cancels. 2 DAB AF* AF ON : [Initial]; Traces the programme among DAB services   Alternative frequency and FM RDS stations, [11, 22].
                    
                    ページ18に含まれる内容の要旨 
                    
                        Indications Selectable settings, [reference page] TAG DISP TAG ON : [Initial]; Shows the Tag information while playing MP3/  Tag display WMA tracks, [14]. TAG OFF : Cancels. AMP GAIN You can change the maximum volume level of this unit.  Amplifier gain control LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power of  the speaker is less than 50 W to prevent them from being  damaged.) HIGH PWR : [Initial]; VOL 00 – VOL 50 IF BAND AUTO : [Initial]; Increases the tuner selectivity to reduce  
                    
                    ページ19に含まれる内容の要旨 
                    
                        ⁄ Adjust the sound as you want. (See  iPod®/D. player operations page 15.)  • Make sure the equalizer on the iPod or  This unit is ready for operating an Apple iPod  D. player is deactivated. or a JVC D. player from the control panel. Before operating your iPod or D. player: Connect either one of the following (separately  1 2 To pause* or stop*  purchased) to the CD changer jack on the rear  playback of this unit. To resume playback,  • Interface adapter for iPod —KS-PD100 for  ® press it again
                    
                    ページ20に含まれる内容の要旨 
                    
                        2 Select the desired menu. 7 Random play ALBM RND*  For iPod: Functions the same as “Shuffle Albums” of  PLAYLIST Ô ARTISTS Ô ALBUMS Ô SONGS the iPod. Ô GENRES Ô COMPOSER Ô (back to the  SONG RND/RND ON  beginning) Functions the same as “Shuffle Songs” of  For D. player: the iPod or “Random Play = On” of the D.  PLAYLIST Ô ARTIST Ô ALBUM Ô GENRE  player. Ô TRACK Ô (back to the beginning) RND OFF Cancels. 3 Confirm the selection. To move back to the previous    * For iPod: Only if you select “ALL