ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
MODEL 360E
CARBON DIOXIDE ANALYZER
© TELEDYNE INSTRUMENTS
ADVANCED POLLUTION INSTRUMENTATION DIVISION
9480 CARROLL PARK DRIVE
SAN DIEGO, CA 92121-5201
USA
Toll-free Phone: 800-324-5190
Phone: 858-657-9800
Fax: 858-657-9816
Email: api-sales@teledyne.com
Website: http://www.teledyne-api.com/
04584 REV. C8
Copyright 2008 Teledyne Advanced Pollution DCN 5341
Instrumentation 06 March 2009
ページ2に含まれる内容の要旨
THIS PAGE IS INTENTIONALLY LEFT BLANK
ページ3に含まれる内容の要旨
Model 360E Instruction Manual M360E Documentation SAFETY MESSAGES Your safety and the safety of others is very important. We have provided many important safety messages in this manual. Please read these messages carefully. A safety message alerts you to potential hazards that could hurt you or others. Each safety message is associated with a safety alert symbol. These symbols are found in the manual and inside the instrument. The definition of these symbols is described below: G
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
Model 360E Instruction Manual M360E Documentation TABLE OF CONTENTS 1. M360E DOCUMENTATION.....................................................................................................................................................1 1.1. Using This Manual............................................................................................................................................................1 2. SPECIFICATIONS, APPROVALS AND WARRANTY ...............................
ページ6に含まれる内容の要旨
M360E Documentation Model 360E Instruction Manual 6. OPERATING INSTRUCTIONS ..............................................................................................................................................51 6.1. Overview of Operating modes ........................................................................................................................................51 6.2. Sample Mode .......................................................................................
ページ7に含まれる内容の要旨
Model 360E Instruction Manual M360E Documentation 6.13.8. Flow Calibration..................................................................................................................................................120 6.13.9. Test Channel Output...........................................................................................................................................121 6.14. SETUP MORE ALRM: Using the Gas Concentration Alarms.........................................
ページ8に含まれる内容の要旨
M360E Documentation Model 360E Instruction Manual 10.2.1. Sample Gas Flow ...............................................................................................................................................168 10.2.2. Flow Rate Control...............................................................................................................................................169 10.2.2.1. Critical Flow Orifice ........................................................................
ページ9に含まれる内容の要旨
Model 360E Instruction Manual M360E Documentation 11.2.3. Poor or Stopped Flow of Purge Gas...................................................................................................................204 11.3. Calibration Problems ..................................................................................................................................................204 11.3.1. Miscalibrated.......................................................................................
ページ10に含まれる内容の要旨
M360E Documentation Model 360E Instruction Manual LIST OF APPENDICES APPENDIX A - VERSION SPECIFIC SOFTWARE DOCUMENTATION APPENDIX A-1: M360E Software Menu Trees, Revision G.4 APPENDIX A-2: Setup Variables For Serial I/O, Revision G.4 APPENDIX A-3: Warnings and Test Functions, Revision G.4 APPENDIX A-4: M360E Signal I/O Definitions, Revision G.4 APPENDIX A-5: M360E iDAS Functions, Revision G.4 APPENDIX A-6: Terminal Command Designators, Revision G.4 APPENDIX B - M360E SPARE PARTS LIST
ページ11に含まれる内容の要旨
Model 360E Instruction Manual M360E Documentation Figure 6-19: APICOM Remote Control Program Interface.................................................................................. 131 Figure 7-1: Pneumatic Connections–Basic Configuration–Using Bottled Span Gas ........................................ 138 Figure 7-2: Pneumatic Connections–Basic Configuration–Using Gas Dilution Calibrator................................ 139 Figure 7-3: Pneumatic Connections–M360E with Zero
ページ12に含まれる内容の要旨
M360E Documentation Model 360E Instruction Manual Table 6-3: List of Warning Messages.................................................................................................................. 55 Table 6-4: Primary Setup Mode Features and Functions.................................................................................... 57 Table 6-5: Secondary Setup Mode Features and Functions............................................................................... 57 Tabl
ページ13に含まれる内容の要旨
Model 360E Instruction Manual M360E Documentation 1. M360E DOCUMENTATION Thank you for purchasing the Model 300E Gas Filter Correlation Carbon monoxide Analyzer! The documentation (part number 04584) for this instrument is available in several different formats: Printed format, or; Electronic format on a CD-ROM. ® ® ® The electronic manual is in Adobe Systems Inc. “Portable Document Format”. The Adobe Acrobat Reader software, which is necessary to view these files, can be downloaded
ページ14に含まれる内容の要旨
M360E Documentation Model 360E Instruction Manual 5.0 OPTIONAL HARDWARE & SOFTWARE A description of optional equipment to add functionality to your analyzer. 6.0 OPERATION INSTRUCTIONS This section includes step-by-step instructions for operating the analyzer and using its various features and functions. 7.0 CALIBRATION PROCEDURES General information and step by step instructions for calibrating your analyzer. 8.0 EPA PROTOCOL CALIBRATION Because CO is not declared a criteria air po
ページ15に含まれる内容の要旨
Model 360E Instruction Manual Specifications, Approvals and Warranty 2. SPECIFICATIONS, APPROVALS AND WARRANTY 2.1. Specifications Table 2-1: Model 360E Basic Unit Specifications Min/Max Range In 1ppb increments from 50ppb to 2 000ppm, dual ranges or auto ranging (Physical Analog Output) 3 3 Measurement Units ppb, ppm, µg/m , mg/m , %(user selectable) Zero Noise < 0.1 ppm (RMS) Span Noise < 1% of reading (RMS) 1 Lower Detectable Limit1 < 0.2 ppm 1 Zero Drift (24 hours) <0.25 ppm
ページ16に含まれる内容の要旨
Specifications, Approvals and Warranty Model 360E Instruction Manual 2.2. CE Mark Compliance Emissions Compliance The Teledyne Instruments Model 360E Gas Filter Correlation CO Analyzer was tested and found to be fully 2 compliant with: EN61326 (1997 w/A1: 98) Class A, FCC Part 15 Subpart B section 15.107 Class A, ICES-003 Class A (ANSI C63.4 1992) & AS/NZS 3548 (w/A1 & A2; 97) Class A. Tested on 11-29-2001 at CKC Laboratories, Inc., Report Number CE01-249. Safety Compliance The Teledyn
ページ17に含まれる内容の要旨
Model 360E Instruction Manual Specifications, Approvals and Warranty THE WARRANTIES SET FORTH IN THIS SECTION AND THE REMEDIES THEREFORE ARE EXCLUSIVE AND IN LIEU OF ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR OTHER WARRANTY OF QUALITY, WHETHER EXPRESSED OR IMPLIED. THE REMEDIES SET FORTH IN THIS SECTION ARE THE EXCLUSIVE REMEDIES FOR BREACH OF ANY WARRANTY CONTAINED HEREIN. API SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF
ページ18に含まれる内容の要旨
ページ19に含まれる内容の要旨
Model 360E Instruction Manual Getting Started 3. GETTING STARTED 3.1. Unpacking and Initial Set Up CAUTION To avoid personal injury, always use two persons to lift and carry the Model 360E. 1. Verify that there is no apparent external shipping damage. If damage has occurred, please advise the shipper first, then Teledyne Instruments. 2. Included with your analyzer is a printed record of the final performance characterization performed on your instrument at the factory. This record,
ページ20に含まれる内容の要旨
Getting Started Model 360E Instruction Manual 5. Check the connectors of the various internal wiring harnesses and pneumatic hoses to make sure they are firmly and properly seated. 6. Verify that all of the optional hardware ordered with the unit has been installed. These are listed on the paperwork accompanying the analyzer. 7. VENTILATION CLEARANCE: Whether the analyzer is set up on a bench or installed into an instrument rack, be sure to leave sufficient ventilation clearance. AREA MI
