ページ1に含まれる内容の要旨
MODEL H7779
JERKY SLICER
INSTRUCTION SHEET
Inventory (Figure 1) Disassembly for Cleaning
You must disassemble the jerky slicer as shown
A. Jerky Slicer ................................................. 1
in Figure 2 to clean all individual components
B. Handle ........................................................ 1
thoroughly. Disassembly requires a 5mm hex
C. Thumbscrew for Handle ............................. 1
wrench to remove the top half of the jerky slicer.
D. Clamps ................
ページ2に含まれる内容の要旨
The items are now ready to be sanitized. Some Cleaning and Sanitizing sanitizers require direct applications, while others To prevent contamination and illness you must are designed to be diluted in water and used to clean AND sanitize the components of this jerky soak the item for a specified period of time. The slicer. Bacteria from meat can cause food poison- best method for choosing a chemical sanitizer is ing, other illness, or even death. to do the research and determine which produ
ページ3に含まれる内容の要旨
Assembly 1. Assemble the blade shafts as shown in Figure 3. When assembled correctly, the spring pushes the flat parts of the blades together. When replacing the blades on the main shaft (the one connected to the crank handle), make sure the beveled edge of the blades are facing the spring side. On the driven shaft, make sure the beveled sides of the blades are facing the gear side. 2. Fasten the top half of the jerky slicer onto the base with the two cap screws. Figure 4. Inserting com
ページ4に含まれる内容の要旨
H7779 Parts Breakdown and List � � � � � � � � �� �� �� �� � �� �� �� � � �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH7779001 FUNNEL 17 PH7779017 CLAMP 2 PH7779002 STAINLESS CAP SCREW M6-1 X 12 18 PH7779018 STAINLESS CAP SCREW M6-1 X 10 3 PH7779003 STAINLESS FLAT WASHER 6MM 19 PH7779019 GEAR ASSEMBLY 4 PH7779004 UPPER HOUSING 20 PH7779020 PLASTIC GEAR BUSHING 13MM 5 PH7779005 STAINLESS PHLP HD SCR M5-.8 X 16 21 PH77
