ページ1に含まれる内容の要旨
8210Plus/8210/07048/8110S
Particulate Respirator
3M recommended for sanding, grinding, sawing, sweeping and
insulating
User Instructions
(Keep these instructions for reference)
1
ページ2に含まれる内容の要旨
This respirator helps protect against certain particles. Misuse may result in sickness or death. For proper use, see supervisor, or User Instructions, or call 3M in U.S.A., 1-800-247-3941. In Canada, call Technical Service at 1-800-267-4414. IMPORTANT Before use, the wearer must read and understand these User Instructions. Keep these instructions for reference. Use For Particles such as those from grinding, sanding, sweeping, sawing, bagging, or processing minerals, coal, iron ore, flour, me
ページ3に含まれる内容の要旨
7. Dispose of used product in accordance with applicable regulations. Use Limitations 1. This respirator does not supply oxygen. Do not use in atmospheres containing less than 19.5% oxygen. 2. Do not use when concentrations of contaminants are immediately dangerous to life and health, are unknown or when concentrations exceed 10 times the permissible exposure limit (PEL) or according to specific OSHA standards or applicable government regulations, whichever is lower. 3. Do not alter, abuse or m
ページ4に含まれる内容の要旨
Fig. 4 Fig. 5 1. Prestretch top and bottom straps before placing respirator on the face (8210 only). 2. Cup the respirator in your hand, with the nosepiece at your fingertips, allowing the headbands to hang freely below your hand. 3. Position the respirator under your chin with the nosepiece up. Pull the top strap over your head resting it high at the top back of your head. Pull the bottom strap over your head and position it around the neck below the ears. 4. Place your fingertips from bo
ページ5に含まれる内容の要旨
This respirator contains no components made from natural rubber latex. FOR MORE INFORMATION In United States, contact: Internet www.3m.com/occsafety Technical Assistance 1-800-243-4630 For other 3M products: 1-800-3M-HELPS or 1-651-737-6501 Exported by/Exporté par/Exportado por: 3M Occupational Health and Environmental Safety Division 3M Center, Building 235-2W-70 P.O. Box 33010 St. Paul, MN 55133-3010 Made in U.S.A. ©3M 2003 38-9017-9661-5 5
