ページ1に含まれる内容の要旨
Texture Guns
Models: 288628, 288629, and 245924
125 psi (8.75 bar, 0.875 MPa) Maximum Air Working Pressure
70 psi (4.9 bar, 0.49 MPa) Maximum Fluid Working Pressure
311777D
IMPORTANT SAFETY INSTRUCTIONS. Refer to your
Model
sprayer instruction manual for Pressure Relief, priming and
288628,
spray instructions. Keep these instructions.
no hopper
Model
Model
245924,
288629
with hopper
ti8508a
ti8808a
- For Water-Based Materials Only -
The following Warnings are for the setup, use, grounding
ページ2に含まれる内容の要旨
9. Remove plug and use small screwdriver to remove all Pressure Relief Procedure components out front of gun. WARNING Follow this Pressure Relief Procedure whenever you are instructed to relieve pressure, stop spraying, check or service equipment or install or clean spray ti8806a ti8807a tip. 1. Turn OFF power and turn sprayer pressure control to Assembly lowest pressure setting. 1. Hold gun as shown and insert spring in front of gun. 2. Trigger gun into pail to relieve pressure. Cleanin
ページ3に含まれる内容の要旨
Parts 27 Model 288628 and 245924 Model 288629 3e 3c 3f 31 3d 3a 3d 3b 33 1B 6 10 8 20 (a,b,c,d) 21 9 22 21 32 ti8509a 16a 2 27 26 16c 3e 3f 20 3b 21 3c 3d 22 21 1A 3d 10 3a 6 16b 8 (a,b,c,d) ti8524a 2 9 Ref. Part Description Qty Ref. Part Description Qty 9 169970 FITTING, line air 1 A 288628 GUN, complete, (for use with hopper) 1 10 15B565 VALVE, ball 1 B 288629 GUN, complete, (non-hopper) 1 16 234162 KIT, plug, includes 16a, 16b, 16c 1 1A 277393 BODY, gun 1 16a PLUG, hopper 1B 277394 BODY, gun
ページ4に含まれる内容の要旨
All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. This manual contains English. MM 311777 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441 www.graco.com 311777D Revised 09/2007
