Revolabs Inc.VTX 1000の取扱説明書

ページ1に含まれる内容の要旨

Revolabs Single Channel System - Polycom VTX 1000 Setup Guide
NOTES AND CAUTIONS:


This setup guide will guide you through the steps needed to properly connect a
Revolabs Single Channel system to a Polycom VTX 1000 speakerphone.

1. Connecting the Cables
2. Configuring the VTX 1000 speakerphone

Note: It is important to carefully follow these instructions in order and completely.
Otherwise, your Single Channel System and/or the phone may not function properly.
Please read through

ページ2に含まれる内容の要旨

Connecting the Cables 1. Connect Single Channel system to VTX 1000 using Revolabs 2.5mm to RCA cable Configuring the VTX 1000 Speakerphone CONFIGURING THE AUDIO MENUS OF THE VTX 1000 SPEAKERPHONE 1. Press MENU button 2. Scroll down to ADMIN SETUP then press SELECT 3. Scroll down to AUDIO SETUP then press SELECT 4. Scroll down to AUX INPUT then press SELECT 5. Use Soft Keys Right to select WIRELESS MIC then press SAVE NOTES: 1. Revolabs only recommends using the wearabl