Winegard HD7694Pの取扱説明書

ページ1に含まれる内容の要旨

HOW TO PROVIDE Fig. 6
Example of antenna grounding as per
National Electrical Code, ANSI/NFPA 70
LIGHTNING PROTECTION
FOR TV ANTENNA AND SET
Step 1. Mount the lightning arrestor or
75 ohm coaxial grounding block as close
Antenna Lead
as possible to where the 75 ohm coaxial In Wire
cable downlead enters the house. See
769 Series Antennas
Figure 6.
Digital/High Definition
Step 2. The ground wires for both the
Ground
mast and the downlead should be copper
Clamp
VHF/UHF MODELS
or aluminum w

ページ2に含まれる内容の要旨

    For Model HD7696P. Fig. 2 For Model HD7696P. NOTE: STEP 5. Unfold the elements of the To prevent damage in shipping, some of the elements are folded to the front section of the antenna. The opposite side of the boom. For maximum performance, you must unfold the elements should be on the top side elements correctly. Please follow these steps. of the front section of the antenna. FRONT Remove the bolt, hex nut, and ele- BOOM ment from the tapered end of the REAR STEP 1. Re