A&D HJ-150の取扱説明書

ページ1に含まれる内容の要旨

HJ-150 Compact Scale
Operating Instructions
Cautions

Avoid installing / leaving the scale in direct sunlight / high humidity.

Place the scale on a flat and solid surface in a place free from wind.

Avoid vibration, strong electric or magnetic fields and rapid changes in
temperature or humidity.

Avoid using the scale near other electronic equipment.

Do not mix the battery types. Replace all of the batteries at same time.

If the scale is not to be used for a long period of time, remove

ページ2に含まれる内容の要旨

Switches ON/ZERO/OFF Switch: Press to turn the scale on. In the operation mode, press briefly to set the display to zero. Press and hold approximately 3 seconds to turn the scale off. LIGHT/CAL Switch: In the operation mode, press briefly to turn the LCD backlight on. Press and hold approximately 3 seconds to enter the calibration mode. g / oz Switch: In the operation mode, press the switch located on the bottom of the scale to change the weighing unit between “g” and “oz”. Installing / Re

ページ3に含まれる内容の要旨

Automatic power-off function The automatic power-off function turns power off after approximately 2 minutes of stable display during the object(s) applied. When there is no object applied, it will turn off after 30 seconds. Calibration 1. Make sure that there is nothing on the weighing pan, press and hold the LIGHT/CAL key approximately 3 seconds. The display shows Cal . Release the key. 2. The scale memorizes the zero point and automatically displays 100.0 g . 3. Place the calibration weight

ページ4に含まれる内容の要旨

3-23-14 Higashi-Ikebukuro, Toshima-ku, Tokyo 170-0013 JAPAN Telephone: [81] (3) 5391-6132 Fax: [81] (3) 5391-6148 A&D ENGINEERING, INC. 1555 McCandless Drive, Milpitas, CA. 95035 U.S.A. Telephone: [1] (408) 263-5333 Fax: [1] (408) 263-0119 A&D INSTRUMENTS LTD. Unit 24/26 Blacklands Way Abingdon Business Park, Abingdon, Oxon OX14 1DY U.K. Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485 Große Straße 13b 22926 Ahrensburg GERMANY Telephone: [49] (0) 4102 459230 Fax: [