Omega NET ILD44-UTPの取扱説明書

ページ1に含まれる内容の要旨

Step 11. Enter to the Thermocouple Type Input Submenu Step 30. Select the Deviation Control Type Submenu SPECIFICATION
Press to display flashing, previously selected Press . If flashing Deviation is displayed press ,
d d _DEV a
Output 1:
Accuracy:
Thermocouple type. otherwise press b until flashing _DEV is shown. Now
Relay 250 Vac @ 3 A Resistive Load,
+0.5°C temp;
press to store and go to next menu item.
d
SSR, Pulse, Analog Voltage and Current
0.03% rdg. process typical
Step 12. Scroll thro

ページ2に含まれる内容の要旨

This Quick Start Reference provides information on Mounting Big Display Through Panel: CONFIGURATION OPERATION - (For Thermocouple Input) setting up your instrument for basic operation. The 1. Using the panel cutout diagram shown, cut an opening in latest complete Communication and Operational Step 1. Apply Power to the Instrument MENU Mode: the panel. When your device is first powered up it will display the Manual as well as free Software and ActiveX Flashing display in MENU Mode means you can