ページ1に含まれる内容の要旨
OUT
®
RAYNGER
™
3i SERIES
OPERATOR’S MANUAL
Rev H
6/98
56700-1
DC
SET
LASER
RUN
LOG
ACTIVATE
RECALL
• •
MODE LOCK
LOG RCL SET °C °F
( ) ( )
HI LO Tamb
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
WARRANTY Raytek warrants each instrument it manufactures to be free from defects in material and work- manship under normal use and service for the period of one year from date of purchase. This warranty extends only to the original purchaser. This warranty shall not apply to fuses, batteries, or any product which has been subject to misuse, neglect, accident, or abnormal conditions of operation. In the event of failure of a product covered by this warranty, Raytek will repair the instrument w
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
TABLE OF CONTENTS SECTION PAGE 1.0 INTRODUCTION.............................................................................1-1 1.1 DESCRIPTION .......................................................................................................1-1 1.2 INVENTORY ..........................................................................................................1-2 1.3 MODEL IDENTIFICATION.................................................................................1-3 2.0 OPERATION
ページ6に含まれる内容の要旨
2.7 SIGHTING SYSTEMS..........................................................................................2-29 2.7.1 Single Laser Sighting .....................................................................................2-31 2.7.2 Dual Laser Sighting........................................................................................2-31 2.7.3 Crossed Laser Sighting..................................................................................2-32 2.7.4 Scope Sighting .............
ページ7に含まれる内容の要旨
APPENDIX A: OPTICAL ...........................................................................A-1 HOW TO READ THE OPTICAL CHARTS...................................................................A-1 OPTICAL CHARTS ..........................................................................................................A-2 APPENDIX B: OBJECT EMISSIVITY.......................................................B-1 HOW TO DETERMINE OBJECT EMISSIVITY ..................................................
ページ8に含まれる内容の要旨
Table of Contents Raynger 3i Series Operator's Manual
ページ9に含まれる内容の要旨
1.0 INTRODUCTION 1.1 DESCRIPTION ® ™ The Raynger 3i series of instruments are portable infrared temperature measure- ment devices. Each model is rugged and easy to use for making fast, noncontact, non- destructive temperature measurements. They can measure operating temperatures of mechanical, electrical, or production equipment without removing the equipment from service. They can also measure product temperatures during manufacturing or storage without contaminating or marring the product.
ページ10に含まれる内容の要旨
Each model is molded from rugged, high-strength, solvent resistant plastic and is actuated by a two-stage trigger (second stage is used for data logging only). Each model has the following: High quality optical system Infrared detector Circuit board assembly with microprocessor LCD display with backlighting feature Touch-sensitive membrane switches for changing loops and modes Battery compartment for four AA batteries Power input jack for AC adaptor Signal output jack (analog 1m
ページ11に含まれる内容の要旨
1.3 MODEL IDENTIFICATION Refer to Table 1-1 for a list of standard models along with their temperature ranges, optical resolutions, spectral ranges, and sighting systems. You can determine the exact model number of your unit by looking at the manufac- turing label on the underside of the unit. On the label is an area for model designa- tion. The model type is printed in the following format: XXXYYYZZZZZ where XXX is an abbreviation of the company name, YYY is the product (or abbrevia- tion of
ページ12に含まれる内容の要旨
1-4 Raynger 3i Series Operator’s Manual
ページ13に含まれる内容の要旨
2.0 OPERATION This portion of the manual contains the following sections: Quick Start—To use your unit right away, follow the brief instructions on basic operating procedures in this section. Principles of Operation—A short introduction to infrared thermometry. Your Portable Infrared Thermometer—Describes and illustrates the thermome- ter’s control panel, display, and features. How to Operate—A detailed user guide that describes each of the operating modes. It includes descriptions of
ページ14に含まれる内容の要旨
ページ15に含まれる内容の要旨
2.2 PRINCIPLES OF OPERATION An infrared thermometer and the human eye are very similar. An infrared ther- mometer has a lens that focuses infrared radiation from an object onto a detector. The eye focuses light onto the retina. The detector is stimulated by the incoming infrared energy and produces a signal that is transmitted to the circuitry. The retina is stimu- lated by incoming light and sends a signal to the brain. The circuitry processes this signal and computes the temperature of th
ページ16に含まれる内容の要旨
ページ17に含まれる内容の要旨
Your portable thermometer has the following: Trigger—Two-stage trigger. The first stage activates the unit to take temperature readings. The second stage is functional only in the datalog mode. To store a tem- perature reading, pull the trigger all the way in until you hear the tone (the tone signals that the reading has been stored). When you release the trigger, the unit goes to sleep. Control Panel and Display—All controls (except the trigger) are located on the control panel. The di
ページ18に含まれる内容の要旨
2.4 OPERATION AND CONTROLS This section instructs you in the operation of the instrument. It describes battery and/or AC adaptor installation and the controls and functions of the different control loops and operating modes. 2.4.1 Battery/AC Adaptor Installation The instrument may be powered by batteries or an AC adaptor. Battery power is sup- plied by 4 “AA” batteries. The batteries are located in the base of the handle. AC power is supplied by an optional AC power adaptor (DIN VDE 0551 app
ページ19に含まれる内容の要旨
2.4.2 Control Panel and Display Figure 2-4 shows the display and controls. Descriptions of these, in alphabetical order, follow the illustration. Backlight on/off button Run/Log Increase/up RCL LOG SET °C °F RUN RUN selector switch button LOG LOG Setup ( ) ( ) HI LO T amb Decrease/down button button SET Mode and Recall RECALL ACTIVATE button MODE ACTIVATE • • • • Activate and trigger MODE LOCK RECALL LOCK lock button LASER Laser on/off button Data logger Recall Setup icon loop icon loop ic
ページ20に含まれる内容の要旨
Activate button—Press the activate button to activate HAL, LAL, or TAM, or to tog- gle between DIG/ANA, or °C/°F, in the SET loop. Backlight button and icon—The display has a backlight for working in low lighting conditions. Press the backlight button to activate or deactivate the backlight. The backlight icon is activated when the backlight is on. To save battery power, use the backlight only when necessary. Note that if the battery voltage falls below 4.0 V, the backlight will automatically
