Desa BY30CEの取扱説明書

デバイスDesa BY30CEの取扱説明書

デバイス: Desa BY30CE
カテゴリ: 電熱器
メーカー: Desa
サイズ: 0.54 MB
追加した日付: 4/4/2014
ページ数: 32
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスDesa BY30CEの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Desa BY30CEに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Desa BY30CEをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Desa BY30CEのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Desa BY30CEの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Desa BY30CE 取扱説明書 - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Desa BY30CEを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Desa BY30CEの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

R
PORTABLE
FORCED
AIR HEATERS
OWNER’S MANUAL
Heater Sizes: 30,000 70,000 90,000 150,000 Btu/Hr
Models: BY30CE, BY70CE, BY100CE, and BY150CE
IMPORTANT
Read and understand this manual before assembling, starting or servicing
heater. Improper use of heater can cause serious injury. Keep this manual
for future reference.

ページ2に含まれる内容の要旨

SECTION PAGE CONTENTS Safety Information ................................................................................ 2 Product Identification ........................................................................... 4 Unpacking............................................................................................. 5 Assembly .............................................................................................. 5 Theory of Operation .............................................

ページ3に含まれる内容の要旨

SAFETY WARNINGS (Continued) • Use only kerosene or No. 1 fuel oil to avoid risk of fire or explosion. Never use INFORMATION gasoline, naphtha, paint thinners, alcohol, or other highly flammable fuels. Continued • Fueling a) Personnel involved with fueling shall be qualified and thoroughly familiar with the manufacturer's instructions and applicable regulations regarding the safe fu- eling of heating units. b) Only the type of fuel specified on the heater's data plate shall be used. c) All flame,

ページ4に含まれる内容の要旨

Hot Air Outlet PRODUCT Handle Upper Shell IDENTIFICATION Fan Guard Lower Shell Air Filter End Cover Fuel Tank Fuel Cap Side Cover Flame-Out Control Reset Button Power Cord Figure 1 - 30/70,000 Btu/Hr Models Hot Air Outlet Upper Shell Lower Shell Fuel Cap Fan Guard Fuel Tank Side Cover Power Cord Flame-Out Control Reset Button Figure 2 - 90/150,000 Btu/Hr Models 4 102422

ページ5に含まれる内容の要旨

1. Remove all packing items applied to heater for shipment. UNPACKING 2. Remove all items from carton. 3. Check items for any shipping damage. If heater is damaged, promptly inform dealer where you bought heater. These models are furnished with wheels and handles. Wheels, handles, and the ASSEMBLY mounting hardware are found in the shipping carton. (For 90,000 and 150,000 Tools Needed Btu/Hr Models Only) • Medium Phillips Screwdriver • 3/8" Open or Adjustable Wrench • Hammer 1. Slide axle throug

ページ6に含まれる内容の要旨

The Fuel System: The air pump forces air through the air line. The air is then THEORY OF pushed through the burner head nozzle. This air causes fuel to lift from the tank. A OPERATION fine mist of fuel is sprayed into the combustion chamber. The Air System: The motor turns the fan. The fan pushes air into and around the combustion chamber. This air is heated and provides a stream of clean, hot air. The Ignition System: The electronic ignitor sends voltage to the spark plug. The spark plug igni

ページ7に含まれる内容の要旨

VENTILATION WARNING Follow the minimum fresh, outside air ventilation requirements. If proper fresh, outside air ventilation is not provided, carbon monoxide poisoning can occur. Provide proper fresh, outside air ventilation before running heater. Provide a fresh air opening of at least 2800 square cm (three square feet) for each 100,000 BTU/Hr rating. Provide extra fresh air if more heaters are being used. Example: A 150,000 Btu/Hr heater requires one of the following: • a two-car garage door

ページ8に含まれる内容の要旨

To Stop Heater OPERATION 1. Unplug power cord from outlet. Continued To Restart Heater 1. Wait 2 minutes after stopping heater. 2. Repeat steps under To Start Heater, page 7. Note: If shipping, transport companies require fuel tanks to be empty. STORING, 1. Drain fuel tank. TRANSPORTING, Note: Some models have drain plug on underside of fuel tank. If so, remove drain plug to drain all fuel. If heater does not have drain plug, drain fuel OR SHIPPING through fuel cap opening. Be sure all fuel is r

ページ9に含まれる内容の要旨

TROUBLE- WARNING SHOOTING Never service heater while it is plugged in, operating, or hot. Severe burns and electrical shock can occur. OBSERVED FAULT POSSIBLE CAUSE REMEDY Wrong pump pressure See Pump Pressure Heater ignites, but flame-out control Adjustment, page 14. shuts off heater after Dirty air output, air intake, See Air Output, Air Intake a short period of and lint filters and Lint Filters, page 14. time. Dirty fuel filter See Fuel Filter, page 11. Dirt in nozzle See Nozzle, pages 15 a

ページ10に含まれる内容の要旨

SERVICE WARNING PROCEDURES Never service heater while it is plugged in, operating, or hot. Severe burns and electrical shock can occur. Upper Shell Upper Shell Removal 1. Remove screws and lock washers along each side of heater using 5/16" nut- Fan Guard driver. These screws attach upper and lower shells together. 2. Lift upper shell off. 3. Remove fan guard. Figure 7 - Upper Shell Removal, 30/70,000 Btu/Hr Models Upper Shell Fan Guard Figure 8 - Upper Shell Removal, 90/150,000 Btu/Hr Models 10

ページ11に含まれる内容の要旨

Fuel Filter Fuel Filter (30/70,000 Btu/Hr Models) 1. Remove side cover screws using 5/16" nut-driver. 2. Remove side cover. 3. Pull rubber fuel line off fuel filter neck. 4. Carefully pry bushing and fuel filter out of fuel tank. 5. Wash fuel filter with clean fuel and replace in tank. 6. Attach rubber fuel line to Side Cover fuel filter neck. 7. Replace side cover. Fuel Line Figure 9 - Fuel Filter Removal, 30/70,000 Btu/Hr Models Fuel Filter (90/150,000 Btu/Hr Models) Fuel Filter, Bushing, 1. Remov

ページ12に含まれる内容の要旨

Spark Plug Combustion (30,000 Btu/Hr Model) Chamber 1. Remove upper shell (see page 10). 2. Remove fan (see page 18). 3. Remove fuel and air line hoses from nozzle Spark Plug Burner assembly. Mounting Nut Strap Spark 4. Remove spark plug wire Plug Spark Plug from spark plug. Wire 5. Remove two screws using 5/16" nut-driver and remove burner strap. 6. Place hex-body of spark plug into vise and tighten. 7. Remove spark plug Nozzle mounting nut using 11/16" Assembly open-end wrench. 8. Remove burne

ページ13に含まれる内容の要旨

Spark Plug (70/90/150,000 Btu/Hr Models) Spark Plug Burner 1. Remove upper shell (see Wire Head page 10). 2. Remove fan (see page 18). 3. Remove spark plug wire from spark plug. 4. Remove spark plug from burner head using 13/16" open-end wrench. Spark 5. Clean and regap spark plug Plug electrodes as follows: 70/90,000 Btu/Hr Models: 1.4 mm (.055") gap 150,000 Btu/Hr Model: 2.2 mm (.085") gap 6. Install spark plug in burner Figure 14 - Spark Plug Removal, 70/90/150,000 Btu/Hr Models head. 7. Atta

ページ14に含まれる内容の要旨

Air Intake Filter Air Output, Air Intake, Filter End and Lint Filters Cover Fan Guard 1. Remove upper shell (see page 10). 2. Remove filter end cover screws using 5/16" nut- driver. Lint Filter 3. Remove filter end cover. Air Output 4. Replace air output and lint Filter filters. 5. Wash or replace air intake filter (see Preventative Maintenance Schedule, Figure 16 - Air Output, Air Intake, and Lint Filters, page 8). 30/70,000 Btu/Hr Models 6. Replace filter end cover. Air Intake Filter 7. Replace fan

ページ15に含まれる内容の要旨

Combustion Nozzle Chamber (30,000 Btu/Hr Model) 1. Remove upper shell (see page 10). 2. Remove fan (see page 18). 3. Remove fuel and air line hoses from nozzle assem- bly. 4. Turn nozzle assembly 1/4 Nozzle turn to left and pull toward Assembly motor to remove. 5. Place plastic hex-body into vise and lightly tighten. 6. Carefully remove nozzle from the nozzle adapter Fuel Line Hose using 5/8" socket wrench. Air Line Hose 7. Blow compressed air thru face of nozzle. This will Figure 20 - Removing

ページ16に含まれる内容の要旨

Nozzle (70/90/150,000 Btu/Hr Models) Combustion 1. Remove upper shell (see Chamber page 10). 2. Remove fan (see page 18). 3. Remove fuel and air line hoses from burner head. Spark Plug 4. Remove spark plug wire Burner Head Wire from spark plug. 5. Remove spark plug from burner head using 13/16" open-end wrench. 6. Remove three screws using 5/16" nut-driver and Screw remove burner head from Spark combustion chamber. Plug 7. Place burner head into vise and lightly tighten. 8. Carefully remove nozz

ページ17に含まれる内容の要旨

Blade Air Pump Rotor Pump Intake (Procedure if rotor is binding) Plate Filter 1. Remove upper shell (see Filter End page 10). Cover 2. Remove filter end cover Fan Guard screws using 5/16" nut- driver. 3. Remove filter end cover Insert and air filters. Rotor 4. Remove pump plate Air Output screws using 5/16" nut- Filter driver. 5. Remove pump plate. Figure 25 - Rotor Location, 30/70,000 Btu/Hr Models 6. Remove rotor, insert, and blades. Pump Blade Plate 7. Check for debris in pump. Air Intake If deb

ページ18に含まれる内容の要旨

Fan IMPORTANT: Remove fan from motor shaft before removing motor from heater. The weight of the motor Fan Setscrew resting on the fan could damage the fan pitch. 1. Remove upper shell (see page 10). 2. Use 1/8" allen wrench to loosen setscrew which holds fan to motor shaft. Motor 3. Slip fan off motor shaft. Shaft 4. Clean fan using a soft cloth moistened with kerosene or solvent. 5. Dry fan thoroughly. Figure 29 - Fan, Motor Shaft, and Setscrew Location 6. Replace fan on motor shaft. Place fan

ページ19に含まれる内容の要旨

230V/50Hz WIRING Blue Brown DIAGRAMS Green/Yellow White White B Spark Plug Flame- White Blue Blue Orange Terminal Reset Ignitor Motor Out Board Button Control Photocell Red Red Green/ R Yellow Red Figure 31 - Wiring Diagram, 30/150,000 Btu/Hr Models 230V/50Hz Blue Brown Green/Yellow White White B Spark Plug Flame- Orange White Blue Blue Terminal Reset Ignitor Motor Out Board Button Control Photocell Red Red Green/ R Yellow Red Red S or 2 M or 3 Black Motor Start Relay L or 1 Figure 32 - Wiring D

ページ20に含まれる内容の要旨

ILLUSTRATED 3 1 PARTS 43 BREAKDOWN 2 30,000 Btu/Hr Model 4 11-5 11-1 5 11-2 6 11 8 7 9 11-4 15 11-3 13 12 18 13 16 23 17 19 24 20 21 22 43 33 34 25 44 27 41 43 31 29 26 42 30 37 28 35 32 36 18-1 38 18-2 18-3 18-4 14 10 18-5 39 18-6 18-7 40 18-18 18-8 18-17 18-9 18-16 18-10 18-15 18-11 18-14 18-12 Motor and Pump Assembly 18-13 20 102422


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Desa 000 BTU SPC-30R 取扱説明書 電熱器 0
2 Desa 000 Btu/hr Models 取扱説明書 電熱器 0
3 Desa 000-12 取扱説明書 電熱器 0
4 Desa 100 取扱説明書 電熱器 0
5 Desa 104504-02 取扱説明書 電熱器 0
6 Desa 000-15 取扱説明書 電熱器 0
7 Desa 000-30 取扱説明書 電熱器 0
8 Desa 050 BTU 取扱説明書 電熱器 0
9 Desa 105801-09 取扱説明書 電熱器 0
10 Desa 105838-02 取扱説明書 電熱器 0
11 Desa 10 取扱説明書 電熱器 0
12 Desa 101811-01C.pdf 取扱説明書 電熱器 0
13 Desa 000-24 取扱説明書 電熱器 0
14 Desa 104506-02 取扱説明書 電熱器 0
15 Desa 106040-02 取扱説明書 電熱器 0
16 A.O. Smith AH - 290 取扱説明書 電熱器 6
17 A.O. Smith AHD 290 取扱説明書 電熱器 7
18 A.O. Smith AHDS 290 取扱説明書 電熱器 0
19 A.O. Smith ST 3000 取扱説明書 電熱器 5
20 A.O. Smith WATER HEATERS 取扱説明書 電熱器 13