ページ1に含まれる内容の要旨
Kambrook - Australia Kambrook - New Zealand
Building 2, Port Air Industrial Estate Private Bag 94411
1A Hale Street Botany, Manukau
Botany NSW 2019 Auckland 2163
Australia New Zealand
Customer Service Line 1300 139 798 Customer Service Line/
Customer Service Fax 1800 621 337 Spare Parts 0800 273 845
Customer Service Fax 0800 288 513
www.kambrook.com.au
5 Fin/7 Fin/11 Fin
www.kambrook.co.nz
Oil Column Heater
Instruction Booklet
Due to continual improvement in design or otherwise, the product you
ページ2に含まれる内容の要旨
Contents Kambrook Recommends p4 Safety First Your Oil Column Heater p6 Quick Start Guide p7 Using Your Oil Column Heater p8 Care and Cleaning p11 Important Please retain your instruction book for future use. In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 0800 273 845 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au or www.kambrook.co.nz
ページ3に含まれる内容の要旨
• Do not allow materials that have been in contact • Do not leave the oil heater unattended when with oil, petroleum based products or drying fluids in use. to come in contact with the heater. Kambrook Recommends Safety First • Do not operate the oil heater on an incline plane. • Do not run the cord under carpeting Do not operate the oil heater unless the element or cover the cord with rugs, runners or the like. is fully immersed. Do not move while the oil heater Arrange the cord away from
ページ4に含まれる内容の要旨
Your Oil Column Heater Quick Start Guide 1. Carry handle 5. Castor wheels Turning the Setting the Setting the 2. Thermostat control knob 6. Radiator fins heater on after heating mode thermostat assembly 3. Heat setting switches 7. 24 hour programmable timer (KOH111 and KOH111B 4. Cord storage models only) Switch the Power Plug the cord into Switch both of the Turn the and Heat setting a 230V or 240V Power and Heat Thermostat switches to the off power point and setting switches on. contro
ページ5に含まれる内容の要旨
Using Your Oil Column Heater 2. Place the mounting plate onto the Before First Use Setting The Heating Mode base of the oil heater, between Remove any promotional material or All Kambrook oil heaters operate in the last two fins at each end. packaging from the heater. manual heating mode only, except 3. Remove the wing nuts provided for the KOH111 and KOH111B models, The oil heater requires a small amount from the U bolt assembly. which can also operate using the of assembly before use.
ページ6に含まれる内容の要旨
Using Your Oil Column Heater continued Care and Cleaning To set the time you want the heater Ensure that the heater is switched off Setting The Thermostat to turn on, push the red pins outwards and disconnected from the power Control and to set the time that you want point before cleaning. Your Kambrook oil heater is fitted the heater to switch off, push the Use a clean, dry cloth to clean the with a variable thermostat which is pins inwards. Each pin represents a external surfaces of th
