ページ1に含まれる内容の要旨
BASEBOARD MICATHERMIC HEATER
BASEBOARD
MICATHERMIC
Micathermic is a new method of heating that utilizes technology from both convection
HEATER
and reflective heat. The heater releases 80% reflective and 20% convection heat,
distributing heat consistently and more evenly throughout the room. The heater releases
healthy infrared heat, directly warming surrounding objects. As the surrounding objects
USER MANUAL
absorb heat, the air temperature rises.
Model # HGW-20
ページ2に含まれる内容の要旨
INTRODUCTION Remove Packaging PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING HEATER! Heater Diagram 1. Power and Temperature Control Knob 2. Anti-Freeze Setting 3. Temperature Control Light Indicator 1. Remove the heater from the 4. Metal Grille box. 2. Remove the poly foam from both ends and remove the poly bag. 3. Remove the two foot bases and two bolts from the polyfoam. 4. Save the packaging for storing the heater while it is not in use or during summe
ページ3に含まれる内容の要旨
Assembly Operation PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING HEATER! Required tools: phillips screwdriver (not included) 1. Ensure that the Temperature Control Knob is at “OFF” Align the foot bases with the position. [Fig 1] bottom of the unit. Use the included bolts to attach the foot bases to the heater body as shown in the diagram. 2. Plug the power cord into a suitable electrical outlet. [Rated not less than 115 volt] 3. Turn the Temperature Control
ページ4に含まれる内容の要旨
Important Safeguards PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING HEATER! 4. To obtain a desirable temperature, there is an area The heater is hot when in use. To avoid burns, do not let bare skin touch hot indicated on the Temperature surface. Use handles when moving this heater. Control Knob known as the Keep combustible materials, such as drapery and other furnishings, at least 3 “Comfortable Zone.” You feet [0.9m] from the front of the heater and away from the side
ページ5に含まれる内容の要旨
Storage Store the heater in a cool dry location. Preferably, to prevent dust and dirt build up, use the old packaging to repack the unit. Troubleshooting HEATER WILL NOT HEAT 1. Check if the heater is plugged in and turned on. 2. Check if the Temperature Control Knob is in the right position. 3. Check if any objects are covering the unit. HEATER WILL NOT TURN ON 1. Check if the power cord is plugged into an electrical outlet. 2. Check if electricity or the main fuse
ページ6に含まれる内容の要旨
4) Damage caused by repairs or alterations of the heater by anyone other than those authorized by Soleus International Inc. 5) Freight and Insurance cost for the warranty service. ALL WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT ABILITY ARE LIMITED TO ONE-YEAR DURATION OF THIS EXPRESS LIMITED WARRANTY. SOLEUS INTERNATIONAL INC. DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES AND IN NO EVENT SHALL SOLEUS INTERNATIONAL INC’S LIABILITY EXCEED THE RETAIL VALUE
