STA-RITE SR333NAの取扱説明書

デバイスSTA-RITE SR333NAの取扱説明書

デバイス: STA-RITE SR333NA
カテゴリ: 電熱器
メーカー: STA-RITE
サイズ: 1.92 MB
追加した日付: 12/22/2013
ページ数: 38
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスSTA-RITE SR333NAの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、STA-RITE SR333NAに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書STA-RITE SR333NAをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書STA-RITE SR333NAのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - STA-RITE SR333NAの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
STA-RITE SR333NA 取扱説明書 - Online PDF
Advertisement
« Page 1 of 38 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書STA-RITE SR333NAを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書STA-RITE SR333NAの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

CERTIFIED
®
®
SR POOL AND SPA HEATER
120/240 VAC NATURAL GAS/LP GAS
O W N E R’ S M A N U A L
INSTALLATION, OPERATION & PARTS
MODELS
200K BTU/HR SR200NA, SR200LP
333K BTU/HR SR333NA, SR333LP
400K BTU/HR SR400NA, SR400LP, SR400HD
SPECIAL INSTRUCTIONS TO OWNER
Retain this manual for future reference.
This manual supplies information for the installation, operation,
and servicing of the appliance. It is strongly recommended that
this manual be reviewed completely before proceeding with an
installat

ページ2に含まれる内容の要旨

Table of Contents INSTALLATION, OPERATION Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 AND SERVICE MANUAL General Specifications, Requirements . . . . . . . . . . . . . . 3 Description of the Heater. . . . . . . . . . . . . . . . . . . . . . . 4 Model SRC Pool and Spa Natural Gas Heater Sequence of Operation. . . . . . . . . . . . . . . . . . . . . . . . . 4 Owner’s Operating Instructions . . . . . . . . . . . . . . . . . . 4 TO INSTALLER: Before Startup. .

ページ3に含まれる内容の要旨

The heater is supplied with an integral venting system for SAFETY INSTRUCTIONS (Continued) outdoor installation. A vent conversion kit (See Page 14 for Part Numbers for Conversion Kits) is available for installa- This appliance is equipped with an uncon- tions in enclosures (Canada) or indoors (U.S.). Use the ventional gas control valve that is factory set with a mani- specified venting, and only the specified venting, when fold pressure of -.2 inches wc. Improper installation, heater is install

ページ4に含まれる内容の要旨

Gas The heater may not be installed within five feet of the SEQUENCE OF OPERATION inside surface of a pool or spa unless it is separated by a An electronic temperature sensing thermistor in the mani- solid fence, wall or other permanent barrier. fold adapter inlet controls the heater operation. When the Propane (LPG) fired heaters must not be installed in inlet water temperature drops below the temperature set on Massachusetts, by order of the Massachusetts State Fire the operating control, the

ページ5に含まれる内容の要旨

3. Pregnant women beware! Soaking in water above WHAT TO DO IF YOU SMELL GAS 102°F (39°C) can cause fetal damage during the first • Do not try to light any appliance. three months of pregnancy (resulting in the birth of a •Do not touch any electrical switch; do not use any brain-damaged or deformed child). Pregnant women phone in your building. should follow the 100°F (38°C) maximum rule. • Immediately call your gas supplier from a neighbor’s 4. Before entering the spa or hot tub, users should

ページ6に含まれる内容の要旨

ON OFF ON OFF 10. Set 3-way valves on inlet and outlet to pool or spa, as 6. Turn the knob on the gas control clockwise ( ) to appropriate. the black line, depress slightly, and turn to “OFF” posi- 11.Turn on all electric power to the appliance. tion. See Figure 4. 12. Press either the POOL ON or SPA ON button switches Indexing Point on the operating control. 13. Set the thermostat to desired setting (NOTICE: Set Gas control is shown ON. Turn Clockwise and press point must be above actual water

ページ7に含まれる内容の要旨

The five operating switches are: After start-up, the outlet water pipe should feel slightly warmer than the inlet pipe. If it feels hot, or if you hear the POOL ON Press this button to govern heater operation by water in the heater boiling, there may not be enough water the pool temperature setting. flow to the appliance. Make sure that the filter is not SPA ON Press this button to govern heater operation by the plugged. If water temperature remains high but the unit spa temperature setting. con

ページ8に含まれる内容の要旨

O ON N ON ON CARE AND MAINTENANCE Explosion hazard. Purging the system with compressed air can cause components to explode, with MAINTENANCE INSTRUCTIONS risk of severe injury or death to anyone nearby. Use only Risk of fire or explosion from flammable a low pressure (below 5 PSI or 35 kPa), high volume blow- vapors. Do not store gasoline, cleaning fluids, varnishes, er when air purging the heater, pump, filter, or piping. paints, or other volatile flammable liquids near heater or in 4. Remove

ページ9に含まれる内容の要旨

6" (15 cm) HEATER CLEARANCES – OUTDOOR INSTALLATION INSTRUCTIONS The heater must be installed with the top of the vent at Risk of fire, explosion, or asphyxiation if least 10 feet (3M) below, or to either side of, any opening heater is improperly installed, adjusted, serviced or main- into a building. tained. If the heater is located under a roof or deck overhang, These instructions are for licensed, certified, trained and there must be at least three feet (1M) clear space between experienced in

ページ10に含まれる内容の要旨

LOW SPEED BOOSTER PUMP HIGH SPEED FILTER AUX AUX PUMP 1 2 6" (15 cm) The heater is design certified by CSA International for CONTROL PANEL INDEXING installation on combustible flooring; in alcoves; basements; The exhaust discharges vertically from outside the vent in closet or utility rooms (in the U.S.) cover. The heater control panel assembly on top of the jacket can be turned to any of six positions for convenient INSTALLATION IN A GARAGE access to the panel as follows: OR UTILITY ROOM 1.

ページ11に含まれる内容の要旨

CSA B149.1, Natural Gas and Propane Installation Codes, as HEATER CLEARANCES – applicable, and any local codes that may apply. OUTDOOR SHELTER (Canada) or INDOOR (U.S.) The minimum net free area in square inches shall be The following clearances must be maintained from com- as follows: bustible surfaces: TOP ...........................6 INCHES (15cm) Table 2: Combustion and Ventilation ALL SIDES..................6 INCHES (15cm) Air Requirements VENT .........................6 INCHES (15cm) All

ページ12に含まれる内容の要旨

Flue Collar to the Vent Body. Before connecting the OUTSIDE VENT COVER REMOVAL metal Flue Collar to the Vent Body, wet a clean cloth or The heater is supplied from the factory with a built-in paper towel with isopropyl alcohol (rubbing alcohol) and stackless outside vent for outdoor installation. Remove the vigorously wipe the socket of the Vent Body. outside vent cover for outdoor shelter installation. Immediately wipe the cleaned surfaces dry with a clean VERTICAL VENTING - NEGATIVE PRESSURE

ページ13に含まれる内容の要旨

5. Use Listed firestops for floor and ceiling penetrations. 7. Fire Hazard. Do not vent the heater Use Listed thimble for wall penetrations. Use a Listed directly into a masonry chimney. Installation into a roof flashing, roof jack, or roof thimble for all roof pen- masonry chimney must use a chimney liner and must etrations. Do not fill the space around the vent (that is, meet the National Fuel Gas Code, ANSI Z223.1/NFPA the clear air space in the thimble or firestop) with 54 and/or CSA B149.1

ページ14に含まれる内容の要旨

from the heater at least 1/4” per foot (2cm/M). Install Table 4: Vent Termination Height vs. Listed condensate drains at low points where conden- Roof Pitch – U.S. sate might collect. Plumb condensate drains to a drain Minimum Height through hard piping or high-temperature tubing such Roof Pitch Above Roof* as silicone rubber or EPDM rubber – do not use vinyl or other low temperature tubing. Follow drain manu- Flat to 6/12 1 Ft. facturer’s installation instructions. 6/12 to 7/12 1 Ft. 3 in. 5. U

ページ15に含まれる内容の要旨

8. Fire Hazard. Do not run the heater vent Max 12" 4' Min. 4' Min. Min 3" into a common vent with any other appliance. Do not Vent Vent Termination run the Special Gas Vent into, through, or within any Termination Vent 4' Min. Termination active vent such as a factory built or masonry chimney. 1' Min. 4' Min. At least 7' Table 6: Maximum Vent Length above grade adjacent 1' Minimum Gas Meter to public 4” Special Gas Vent (Vertical or Horizontal)* above snow or Forced Air walkways finished grad

ページ16に含まれる内容の要旨

A manual bypass valve should be installed across the 3-Way Chlorinator heater when the pump flow exceeds 120 GPM (454 LPM). Valve See instructions below for setting of the manual bypass. Make sure that the outlet plumbing from the heater con- Heater tains no shut-off valves or other flow restrictions that could prevent flow through the heater (except as noted below). To switch flow between the pool and spa, use a diverter valve. Do not use any valve that can shut off the flow. Do not use a shut

ページ17に含まれる内容の要旨

Do NOT sanitize the pool by putting chlorine tablets or WATER FLOW RATE sticks into the skimmer(s). When the pump is off, this will Maximum and minimum water flow rates required by the cause a high concentration of chlorine to enter the heater, heater are listed below: which could cause corrosion damage to the heat exchanger. Table 8: Maximum and Minimum Flow Rate in GPM (LPM) Model Minimum Flow Maximum Flow 200 20 (76) 120 (454) 333 33 (125) 120 (454) 400 40 (152) 120 (454) If the water flow r

ページ18に含まれる内容の要旨

Pressure Switch is no longer adequate. A Flow Switch must WATER PRESSURE SWITCH be installed instead. Hazardous pressure. Do not bypass the Water NOTICE: Heater operation with incorrect Pressure Switch Pressure Switch or render it inoperable. setting may cause operation with no water flow. Operation Switch Settings of the heater without sufficient water flow may severely damage it. The water pressure switch turns off the burner if the water flow is interrupted. If the water flow is restricted, t

ページ19に含まれる内容の要旨

O ON N ON ON CAUTION To High Side of Differential To avoid water damage or scalding from operation of the Pressure Gauge relief valve, install a drain pipe in the outlet of the pressure relief valve that will direct water discharging from the valve to a safe place for disposal. Do not install any reduc- Connection for ing couplings or valves in the drain pipe. The drain pipe Test must be installed so as to allow complete drainage from the valve and drain line. The relief valve should be tested T

ページ20に含まれる内容の要旨

GAS CONNECTIONS PRESSURE TESTING The heater requires a gas supply of not less than Before operating the heater, the heater and its gas connec- 4” (10.2cm) wc and not more than 14” (35.6cm) wc. tions must be leak tested. Test all gas connections for leaks Gas supply pressures outside of this range may result in with soapy water. improper burner operation. A minimum inlet pressure of Risk of fire or explosion. Do not use an open 4” (10.2cm) wc is required to maintain input rating. flame to test


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 STA-RITE 200K BTU/HR 取扱説明書 電熱器 19
2 STA-RITE 333K BTU/HR 取扱説明書 電熱器 3
3 STA-RITE 400K BTU/HR 取扱説明書 電熱器 18
4 STA-RITE SR200NA 取扱説明書 電熱器 8
5 STA-RITE SR333LP 取扱説明書 電熱器 6
6 STA-RITE SR200LP 取扱説明書 電熱器 27
7 STA-RITE SR400HD 取扱説明書 電熱器 2
8 STA-RITE SR400LP 取扱説明書 電熱器 56
9 STA-RITE SR400NA 取扱説明書 電熱器 2
10 A.O. Smith AH - 290 取扱説明書 電熱器 6
11 A.O. Smith AHD 290 取扱説明書 電熱器 7
12 A.O. Smith AHDS 290 取扱説明書 電熱器 0
13 A.O. Smith ST 3000 取扱説明書 電熱器 5
14 A.O. Smith WATER HEATERS 取扱説明書 電熱器 13
15 A.O. Smith ST 1500 取扱説明書 電熱器 1