ページ1に含まれる内容の要旨
installation and
operation manual
for Hunter
For Your Records and Warranty
Assistance
Model Name: _____________________
Ceiling Fans
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
TYPE T Models
copy of your receipt to the manual.
42747-01 • 09/21/07
ページ2に含まれる内容の要旨
Welcome Y o ur n e w H un t e r ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, r e c o r d in f o r m a t i o n f r o m t h
ページ3に含まれる内容の要旨
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace H un t e r ’ s p a t e n t e d 3-p o si t i o n m o un t in g s y s t e m p r o v i d e s y o u m a x imum in s t a ll a t i o n fl ex ib ili t y a n d e a s e . Y o u c a n in s t a ll y o ur H un t e r f a n in o n e of three ways, depending on ceiling height and your preference: Low Pr o fil e , S t a n d a r d, o r A n g l e d m o un t in g . The s t e p s in t h i s m a nu a l in c lu
ページ4に含まれる内容の要旨
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • L o c a t e t h e c e ilin g j o i s t o r o t h e r s ui t a b l e s up p o r t in c e ilin g . • D r ill h o l e s f o r a n d in s t a ll w o o d s c r e w s . • I d e n t i f y a n d c o nn e c t e l e c t r i c a l w ir e s . • Li f t 40 p o un d s . I f y o u n e e d h e l p in s t a llin g t h e f a n , y o ur H un t e r f a n d e a l e r c a n dir e c t you to a licensed installer or electrician. Gatheri
ページ5に含まれる内容の要旨
2 • Installing the Ceiling Plate 2-1. Drill two pilot holes into the wood support structure through the Isolator o u t e r m o s t h o l e s in t h e o u t l e t b o x . The p il o t h o l e s s h o ul d b e 9/64” Ceiling in diameter. Plate 2-2. Your fan comes with four neoprene noise isolators (“Isolators”). Position the isolators between the ceiling plate and ceiling by inserting the raised areas on each isolator into the holes in the Step 2-2 ceiling plate. 2-3. Thread the lead wires f
ページ6に含まれる内容の要旨
3 • Assembling and Hanging the Fan Steps 3-1 – 3-2 You can assemble your fan for standard mounting (steps 3-1 – 3-2) or for low profile mounting (steps 3-3 – 3-4). Note: For low profile mounting, the downrod is replaced with the low profile washer. Downrod 3-1. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy and canopy trim ring. Feed the Canopy wires from the fan through the downrod. 3-2. Loosen the allen head set screw on the adapter u
ページ7に含まれる内容の要旨
4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 4-1. Make sure the power to the outlet box and associated wall switch location is still OFF. 4-2. To connect the wires, hold the bare metal leads together and place a wire connector over the
ページ8に含まれる内容の要旨
5 • Installing the Canopy and Canopy Trim Ring Step 5-2 Ceiling Plate 5-1. H o l din g t h e c a n o p y , r a i s e t h e f a n o ff t h e h o o k . 5-2. A li g n t h e s l o t s in t h e c a n o p y w i t h t h e t a b s o n t h e c e ilin g p l a t e . 5-3. R a i s e t h e c a n o p y o v e r t h e c e ilin g p l a t e . R o t a t e t h e c a n o p y clockwise until the tabs on the ceiling plate totally engage with the slots in the canopy. 5-4. Partially install the three canopy scre
ページ9に含まれる内容の要旨
6 • Assembling the Blades H un t e r f a n s u s e s e v e r a l s t y l e s o f f a n b l a d e ir o n s (b r a c k e t s t h a t h o l d t h e blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) insert them by hand into the holes on the blades. 6-2. A t t a c h e a c h b l a d e t o a b l a d e ir o n u sin g t hr e e b l a d e a s s e mb l y screws. If you used grommets, the blades may appear slightly loose after screws are tightened.
ページ10に含まれる内容の要旨
7 • Installing the Switch Housing 7-1. T o a t t a c h t h e up p e r s w i t c h h o u sin g , p a r t i a ll y in s t a ll t w o #6-32 x 3/8” housing assembly screws into the switch housing mounting plate. 7-2. A li g n t h e k e y h o l e s l o t s in t h e h o u sin g w i t h t h e h o u sin g a s s e mb l y screws. 7-3. Turn the housing counterclockwise until the housing assembly screws are firmly situated in the narrow end of the keyhole slots. I n s t a ll t h e r e m a in in g #6
ページ11に含まれる内容の要旨
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has f o ur s e t t in g s in s e q u e n c e: H i g h , M e dium , L o w a n d O ff . • P ull t h e c h a in s l o w l y t o c h a n g e s e t t in g s . • R e l e a s e s l o w l y t o p r e v e n t t h e c h a in f r o m r e c o ilin g in t o t h e blades. • The c h a in u s e s a b r e a k a w a y c o nn e c t o r t h a t s e p a r a t e
ページ12に含まれる内容の要旨
H un t e r f a n s h a v e t h e p o w e r t o c u t y o ur c o o lin g c o s t s up t o 40%. Beat the High Cost of Cooling The a ir m o v e m e n t c r e a t e d b y a H un t e r c e ilin g f a n l e t s y o u s e t y o ur thermostat higher and still stay comfortable. Every degree you r a i s e t h e t h e r m o s t a t s a v e s up t o 7% o n e n e r g y c o s t s . S o , y o u c a n c u t b a c k o n ex p e n si v e a ir c o n di t i o n in g ...a n d s a v e up t o 40%* o n c o o lin g
ページ13に含まれる内容の要旨
9 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. R e m o v e t h e s h ip p in g b ump e r s . Problem: Noisy operation. 1. Tighten the blade bracket screws unt
