ページ1に含まれる内容の要旨
HM10-15E-32
Ultra-Thin Micathermic Heater
3092402
Model No. HM10-15E-32
V130724
ページ2に含まれる内容の要旨
Thank you for choosing a Soleus Air Micathermic Heater. This Owner’s Manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the opera- tional aspects of your new Soleus Air Micathermic Heater. For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and
ページ3に含まれる内容の要旨
12. A heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint, explosive and/or flammable liquids are used or stored. Keep unit away from heated surfaces and open flames. 13. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocat- able power tap (outlet/power strip). 14. To avoid fire or shock hazard, plug the unit directly into a 120 Volts AC electrical outlet. 15. To disconnect heater, tu
ページ4に含まれる内容の要旨
SAFETY FEATURES Tip-Over Safety Feature This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off. Once the heater is restored to an upright position, the heater will reset. To continue operation, turn on the heater using the control panel on the heater. Overheat Safety Feature This heater is equipped with a overheat safety feature. When the heaters internal components reach a certain temperatur
ページ5に含まれる内容の要旨
PRODUCT DIAGRAM Carry Handles Control Panel Base Brackets 5
ページ6に含まれる内容の要旨
ASSEMBLY 1. Be certain the heater is unplugged and the controls are set to off. Set the heater on the floor upside down. 2. Attach a base bracket to each end of the heater body using the supplied standard screws. Standard Screws Base Brackets MICATHERMIC HEATER 6
ページ7に含まれる内容の要旨
OPERATING INSTRUCTIONS CONTROL PANEL 1. Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate heater in upright position with base brackets attached. 2. Turn the heater on by pressing the ON/OFF button on the control panel. 3. Select a heat setting: On the control panel, press the MODE button to toggle between the two heat settings; LOW (1000W) or HIGH (1500W) . Adjust the thermostat by pressing the TEMPERATURE SELECT buttons (▲ or ▼) o
ページ8に含まれる内容の要旨
OPERATING INSTRUCTIONS (CONTINUED) OPTIMAL OPERATING CONDITIONS To get the most out of your Soleus Air Micathermic Heater, follow these helpful hints: 1. All electric heaters are limited to maximum of 1500 watts* (per UL and ETL requirements). Due to this limitation, all electric heaters can heat approximately 150 square feet. Micathermic heaters fit in this cate- gory, but they are able to provide a more comfortable and consistent heat than other heating technologies. 2. For optim
ページ9に含まれる内容の要旨
MAINTENANCE 1. Unplug the unit and let it cool completely. 2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater. 3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater. 4. DO NOT immerse the heater in wa
ページ10に含まれる内容の要旨
WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air heater to be free of defects in material and workman- ship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original re- tail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International Inc. will, at its option, either repair or replace it, free of charge within a reasonable time after the unit
