ページ1に含まれる内容の要旨 
                    
                        OPERATORS MANUAL
MODELS 2032-OS, 2048-OS, 204830-OS, 3068-OS
RIDGID ON-SITE STORAGE EQUIPMENT
DANGER
• Do NOT put fuels, flammables, explosives or hazardous • Use these products ONLY for storing and transporting 
materials inside these products. electric or hand tools and equipment, and other similar 
materials.
• Gasoline, solvents, gun powder or other munitions, 
• Failure to follow these warnings or modifications or 
dynamite, propane, acetylene or other such products 
other uses of these pro
                    
                    ページ2に含まれる内容の要旨 
                    
                        PADLOCK INSTALLATION INSTRUCTIONS FOR ALL UNITS U-Bolt 7/8"-1" Figure 3 (measure height Figure 1 Lock Shackle Figure 2 when lock is closed) TOOLS REQUIRED- One wrench with 7/16” socket. 3. Guide the U-bolt through the two holes in the back of  PADLOCK INFORMATION- Padlock with 7/8”–1” shackle the lock housing (figure 2). height (figure 3) (recommended Master No 5 or equiva- 4. Secure the U-bolt with the two nylon lock nuts sup- lent, not included). plied. 5. Repeat the procedure for the second l
                    
                    ページ3に含まれる内容の要旨 
                    
                        2048-OS AND 204830-OS FLEXI-SHELF™ INSTRUCTIONS FOR REMOVING THE SHELF FROM BOX 1. Be sure all contents are removed from  shelf. 2. Securely grasp shelf at the right side (fac- ing box) with both hands and gently lift  Figure 7 (figure 7). 3. Remove from box and store properly. ADJUSTING THE FLEXI-SHELF™ FOR YOUR STORAGE NEEDS To adjust dividers:  1. Gently lift dividers straight up while holding down  shelf with other hand. 2. Remove divider to desired storage location and  2048-OS,FlexiShelf-1
                    
                    ページ4に含まれる内容の要旨 
                    
                        FOR REPLACEMENT PARTS, CONTACT RIDGID ON-SITE STORAGE EQUIPMENT AT 1-800-4-RIDGID (1-800-474-3443) MODEL NUMBER DESCRIPTION USE WITH QUANTITY 7357 U-Bolt & Nylon Lock Nut 2032-OS, 2048-OS, 204830-OS, 3068-OS 4 Pack Hardware Kit 7628 Rapid Pass™ Rubber Grommet 2048-OS, 204830-OS 1 Pack • No other replacement parts are available for these models. ACCESSORY CASTERS, CALL 1800-4 RIDGID (1-800-474-3443) MODEL NUMBER DESCRIPTION USE WITH LOAD RATING 404-OS 4” Caster Set 2032-OS, 2048-OS, 204830-OS, 30