ページ1に含まれる内容の要旨
Keep this manual for future reference. If you sell or give away this
trailer, make sure you give this manual to the new owner.
Tell them to read the instructions completely.
RIDE N STRIDE
WARNING: This Owners Manual contains Assembly, Operation and Maintenance instructions.
Read entire Owners Manual before assembling and pulling children in the trailer.
OPERATING INFORMATION
WARNING: Avoid serious injury, always wear seat WARNING: Don’t let children play with the trailer/
belts. stroller or giv
ページ2に含まれる内容の要旨
IMPORTANT Read and follow these Safety Rules and Assembly Instructions before operating your trailer/stroller. If you have any questions concerning the safe use of this product, contact InSTEP, LLC at 1-800-242-6110, M-F, 8:00am - 5:00pm CST or visit our web site at www.instep.net or Email us at info@instep.net before using. MAINTENANCE AND CLEANING Step 1. Fabric seat and canopy can be hand washed Step 2. After one hour of use, recheck all fasteners with mild soap and a damp cloth or sponge to
ページ3に含まれる内容の要旨
TRAILER/STROLLER ASSEMBLY To attach axle to shell WARNING: This product uses nylon lock nuts to help eliminate loosening of fasteners from vibration of trailer/stroller. When tightening lock nuts, the bolts must extend through the nuts completely. Step 1. Place folded frame on floor with seat A portion facing up (Figure A). Standing behind the trailer/stroller lift up on the top of the canopy (Figures B and C). Next, lock the two black latches into place by locking them on the side rails (Figure
ページ4に含まれる内容の要旨
FRAME ASSEMBLY Step 2. Undo the two buckles on the sides and at the front end of the G trailer/stroller (Figure G). Then fold down fabric to expose the framing (Figure H). Machine screw, nut, spacer and washer will be attached to the side support rails (Figure I). Undo the machine screw, nut, spacer and washer from the side support rails (Figure J). Insert machine screw on the inside of the side support rail and push through the holes in the side support rails. Once the machine screw has extende
ページ5に含まれる内容の要旨
WHEEL ASSEMBLY Step 3. To attach rear wheels, line up the M hole in the frame with the axle on the rear wheel (Figure M). Then, insert the axle through the hole on the frame (Figure N). Then, insert locking pin through the hole in the axle (Figure O). Then, lock the loop end over the other end of the pin (Figure P and Q). Repeat for other side of the Wheel Axle trailer/stroller. Locking Pin Lower Frame N O Wheel Axle Locking Pin Wheel Axle P Q Locking Pin Locking Pin Lower Frame Wheel Axle Lowe
ページ6に含まれる内容の要旨
TOW BAR ASSEMBLY Step 4. To unfold tow bar, undo locking R S pin that is already inserted in the frame and the tow bar Locking Pin (Figures R and S). Remove locking pin from the frame and Locking Pin Tow Bar the tow bar (Figure T). Rotate the tow bar forward so the hitch is at the front of the trailer/stroller (Figure U). To lock tow bar in place re-insert the locking pin back through the set of holes Hitch in the tow bar and the frame (Figure V). Lock the loop end of Tow Bar the locking pin
ページ7に含まれる内容の要旨
PROPER USE OF SEAT BELTS WARNING: Avoid serious injury, always use Y seat belts. Please Note: For the following instructions see Figure Y. Step 1. To place child in seat, undo front and side Velcro, pull flap all the way up, and drape over rollbar. Shoulder Harness Step 2. Place children in seat. Snap the lap belt Lap Belt together over the children’s lap. Please note that there is one lap belt for both children. Make sure belt is adjusted to fit snugly. Step 3. Place set of shoulder harnesses
ページ8に含まれる内容の要旨
WARNING: When you reassemble your trailer for use, make sure you follow prior assembly instructions. Follow and review all safety rules and warnings to make sure your trailer is safe for use. WARNING: Minimum size: Children must be at least one year old and be able to hold their head up on their own. Check with your child’s doctor to make sure your child has developed enough to be given rides in this product. Children must be old enough to wear an approved bicycle helmet. WARNING: Maximum s
