ページ1に含まれる内容の要旨
Felix Storch, Inc.
SUMMIT APPLIANCE DIV.®
USE AND CARE GUIDE
24 inch wide all refrigerators
24 inch wide all-freezers
24 inch wide wine cellars
24 inch wide refrigerator-freezers
AL650 series
• FF6 Series
AL750 series
• FF7 Series
ALF620 series
• FS62 Series
• SCR600 Series
• CT66 Series
• SWC6G Series
• CT67 Series
• FF8 Series
If you need service or call with a question, please have this information ready. We
advise you to keep this Owners Manual in your possession.
M
ページ2に含まれる内容の要旨
Felix Storch, Inc. Page 2 SUMMIT APPLIANCE DIV. APPLIANCE SAFETY Your safety and the safety of others are very important to us. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. You can be killed or seriously injured if you do not follow these instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructio
ページ3に含まれる内容の要旨
Felix Storch, Inc. Page 3 SUMMIT APPLIANCE DIV. INSTALLATION INSTRUCTIONS UNPACKING Excessive Weight Hazard! * Use two or more people to move and install your appliance. Failure to do so can result in back or other injury. ALLOW APPLIANCE TO SIT UPRIGHT FOR 24 HOURS BEFORE TURNING ON, TO ALLOW THE COMPRESSOR LUBRICANT TO DRAIN. 1. Remove Packaging Materials 2. Remove tape and glue residue from surfaces before turning on the appliance. Rub a small amount of liquid dish soap over t
ページ4に含まれる内容の要旨
Felix Storch, Inc. Page 4 SUMMIT APPLIANCE DIV. INSTALLATION INSTRUCTIONS CHOOSING THE RIGHT PLACE Place the appliance in a dry and regularly ventilated place. It is recommended that this appliance always be operated in an ambient temperature of at least 60°F and under 85°F. The appliance may be exposed to lower or higher temperatures but only for a short period of time and the temperature should never be lower than 45°F. Never place the appliance near heat emitting devices (e.g. coo
ページ5に含まれる内容の要旨
Felix Storch, Inc. Page 5 SUMMIT APPLIANCE DIV. APPLIANCE USE In order to ensure proper temperature, you need to permit proper airflow in the appliance. Do not block any air vents. If the vents are blocked, airflow will be prevented, and temperature and moisture problems may occur. Always position contents to allow some airflow between shelves or baskets. Allow the appliance to cool at least 6 to 8 hours before adding contents. Allow 24 hours for temperature to stabilize. NOTE: When t
ページ6に含まれる内容の要旨
Felix Storch, Inc. Page 6 SUMMIT APPLIANCE DIV. APPLIANCE OPERATION Base Grill (some models only) To Remove and Replace the Base Grill: 1. Open the appliance door and remove the base grill by pulling down and out from the top. 2. Replace the base grill by putting the clips in the openings in the appliance panel. Push in until the base grill snaps into place. An optional stainless steel grill is available for some models (Models beginning with FF6, FF7, CT66, CT67, SCR600, FS62, AL6, AL7
ページ7に含まれる内容の要旨
Felix Storch, Inc. Page 7 SUMMIT APPLIANCE DIV. APPLIANCE CARE Cleaning Your Frost-Free Refrigerator Use nonflammable cleaners. Frost-free means that you do not have to defrost your appliance. Frost is removed by air moving and collecting any moisture and depositing it on the cooling coil. The cooling coil periodically warms up enough to melt the frost, and the water then flows down to the drain pan (located behind the base grill) where it is evaporated. Complete cleaning should be
ページ8に含まれる内容の要旨
Felix Storch, Inc. Page 8 SUMMIT APPLIANCE DIV. TEMPERATURE SELECTION YOUR APPLIANCE MAY HAVE A MECHANICAL (DIAL) OR DIGITAL THERMOSTAT. INSTRUCTIONS FOR BOTH FOLLOW: MECHANICAL THERMOSTAT INSTRUCTIONS The refrigerator is controlled with a thermostat knob located inside the unit, towards the upper right-hand corner. Turn the knob clockwise from the STOP (0) position toward the higher numbers for colder temperatures. Temperature Controls •Higher settings on the knob (higher num
ページ9に含まれる内容の要旨
Felix Storch, Inc. Page 9 SUMMIT APPLIANCE DIV. KEYPAD LOCK (optional on most models) Factory set default password: The factory set default password is 0123. If the default password is lost, press the key (located inside the battery box) for 30 seconds then wait for the warning sound which signifies the factory set default password has been restored. To set the password: While door is open press the key (located inside the battery box) until it jingles, enter the 0123 password then #
ページ10に含まれる内容の要旨
Felix Storch, Inc. Page 10 SUMMIT APPLIANCE DIV. ALARM INSTRUCTIONS (alarms are optional on most models) SETTING THE HIGH/LOW ALARM 1. Press the MODE button until unit is in the ALARM DISPLAY MODE indicated by the display of current temperature and HI and LO alarm settings. 2. To set the HIGH temperature alarm limit press the HI button, to advance the display in 1° incre- ments, until the desired high temperature is displayed. Press and hold the HI button to rapidly ad- vance the display
ページ11に含まれる内容の要旨
Felix Storch, Inc. Page 11 SUMMIT APPLIANCE DIV. INSTRUCTIONS FOR INTREGRATED FRAME (SUFFIX ’IF’) FOR BUILT-IN APPLICATIONS Note: The directions below are for installation under a cabinet in a 24 inch cutout space. If you will be using this product in a freestanding application, please skip below, and begin with step A1 in lower half of page. 1) Remove door from chassis by unscrewing 3 screws in top hinge and 2 screws in bottom hinge. Keep screws, discard hinges. 2) Remove top and bottom
ページ12に含まれる内容の要旨
Felix Storch, Inc. Page 12 SUMMIT APPLIANCE DIV. APPLIANCE OPERATION FF6- FF7– FF8—SCR600 – AL7 Series, with no freezer compartment. DEFROST SYSTEM, OPERATION AND SHELF ADJUSTMENT - All models of the above series are all- refrigerators, with no freezer compartment and an auto-defrost system. During the compressor operation, ice will build along the rear cold wall (the evaporator plate is behind the wall). During the compressor’s off-cycle, ice will melt, drip down, collect in the trou
ページ13に含まれる内容の要旨
Felix Storch, Inc. Page 13 SUMMIT APPLIANCE DIV. APPLIANCE OPERATION FS62 Series of all-freezers These freezers are manual defrost, commercial freezers capable of operating at -25°C (-13°F). Follow the defrosting instructions found earlier in the booklet; being careful not to use sharp objects to scrape the ice. The cooling coils (part of the sealed refrigeration system) run through each fixed shelf. The drawers are fully removable, and you can operate the freezer without them if desire
ページ14に含まれる内容の要旨
Felix Storch, Inc. Page 14 SUMMIT APPLIANCE DIV. BEFORE CALLING FOR SERVICE…. Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If you still need help, follow the instructions below. When calling, please know the purchase date and the complete model and serial number of your appliance. This in- formation will help us to better respond to your request. • Check the plug, fuse and/or circuit breaker. • Test the outlet w
ページ15に含まれる内容の要旨
Felix Storch, Inc. Page 15 SUMMIT APPLIANCE DIV. TROUBLESHOOTING Try the solutions suggested here first to avoid the cost of an unnecessary service call... Your refrigerator or freezer will not operate: • Has a household fuse blown or circuit breaker tripped, or is the outlet not receiving power or switch controlled? Replace the fuse or reset the circuit breaker. Check the outlet with a small appliance you know works. • Is the refrigerator or freezer defrosting (on some models)? Reche
ページ16に含まれる内容の要旨
WARRANTY Call customer service toll free in the U.S.A. @ 1-800-287-8799; Monday to Friday 9:00 am. - 5:00 p.m. (EST). Order parts online at www.summitapplianceparts.com Order parts online at www.summitapplianceparts.com ONE YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained accord- ing to instructions attached to or furnished with the product, warrantor will pay for factory specified parts an
