ページ1に含まれる内容の要旨
FRIDGE-FREEZER
ZI 9454 X
INSTRUCTION BOOKLET
2222 214-73
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of safety.You MUST read it care
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INFORMATION Building the appliance in Fit the appliance into the recess. Fix it to the wall with the appropriate bracket.
ページ4に含まれる内容の要旨
CONTENTS Instructions for the User Instructions for the Installer Important Safety Information 2 Technical Specification 14 Operation 5 Before using 5 15 Installation Use of the freezer - Control panel 5 Positioning 15 Freezing fresh food 6 Electrical Connection 16 Storage of frozen food 6 Positioning 17 Thawing 7 Height adjustment 17 Making ice cubes 7 Fitting the side panels 17 Freezer compartment 7 Building the appliance in 18 Useful hints for freezing 7 Fitting the plinth 18 Use of the refri
ページ5に含まれる内容の要旨
OPERATION Before using Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly. Use of the freezer Control panel A ON/OFF light B Freezer button ON/OFF C Temperature setting button (warmest) D Temperature indicator E Temperature setting button (coldest) F Alarm reset light G Alarm reset button H Fast Freeze light I Fast Freeze button A. Ligh
ページ6に含まれる内容の要旨
Warning! F. Alarm reset light When use the “Fast freeze” function: G. Alarm reset button In the event of an abnormal temperature rise inside about 6 hrs Introducing small quantities of fresh food the freezer (e.g. power cut) warning light (F) will start before (about 5 kg) to flash and a buzzer will sound. about 24 hrs Introducing the maximum quantity of food After the temperature has returned to normal, the before (see rating plate) warning light (F) will continue to flash, although the buzzer
ページ7に含まれる内容の要旨
Thawing Making ice cubes The appliance is provided with one or more trays for Frozen food, prior to being used, can be thawed in ice-cubes. the fridge or at room temperature depending on the time available. Small food items may even be cooked Fill the tray(s) 3/4 full to give the ice space to expand from frozen; in this case cooking will take longer. and place them in the freezer compartment. Any frozen food which is allowed to thaw accidentally To release the ice cubes simply give the tray a sl
ページ8に含まれる内容の要旨
Use of the refrigerator Control Panel
J ON/OFF light N Temperature setting button (coldest) K Fridge button ON/OFF O Super Cooling light L Temperature setting button (warmest) P Super Cooling button M Temperature indicator panel Q D.A.C. light R D.A.C button J. Light ON/OFF Attention! K. Button ON/OFF Difference between the temperature displayed and ON: Press the button (K). The pilot light (J) temperature setting is normal. Especially when: switches on. - a new setting has rece
ページ9に含まれる内容の要旨
Fig. 1 Air recycling The refrigerator compartment is equipped with a special D.A.C.(Dynamic Air Cooling) fan which can be turned on with the button (R- see the control panel). The green light (see fig. 1), when on, means that the fan is working. It is suggested that the fan (D.A.C.) be used when the ambient temperature exceeds 25°C . This device allows for rapid cooling of foods and a more uniform temperature in the compartment. Refrigerator compartment For proper opening and closing, it i
ページ10に含まれる内容の要旨
MAINTENANCE AND CLEANING Before carrying out any maintenance operations, including those described in this book, unplug the appliance from the mains supply. Warning This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorised technicians. Periodic cleaning Clean the inside of the appliance and the accesso- ries with a solution of lukewarm water and bicar- bonate of soda (5 ml to 0.5 litre of water). Rinse and dry thoroughl
ページ11に含まれる内容の要旨
SOMETHING NOT WORKING Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is under guarantee. Before contacting your local Service Force Centre, check the following points: Symptom Solution No power to the appliance Check there is power at the socket. Check there is not a power cut by checking the household lights. Check the fuse has not blown. The light does not come on Ensure t
ページ12に含まれる内容の要旨
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk For Customer Service in the Republic of Irela
ページ13に含まれる内容の要旨
Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has been used for normal domest
ページ14に含まれる内容の要旨
TECHNICAL SPECIFICATIONS POWER SUPPLY VOLTAGE AND FREQUENCY 220-240 V / 50 Hz TOTAL POWER ABSORBED 240 W AVERAGE DAILY UNITS ELECTRICITY * 1.50 kWh GROSS CAPACITY Fridge 342 l Freezer 128 l NET CAPACITY Fridge 338 l Freezer 96 l STAR RATING * This figure is based on standard test results in accordance with European Standard EN 153. Actual consumption will depend on how the appliance is used and where it is located. 14
ページ15に含まれる内容の要旨
INSTALLATION Important Warning IF YOU ARE DISCARDING AN OLD APPLIANCE It must be possible to disconnect the appliance from THAT HAS A LOCK OR CATCH ON THE DOOR, the mains power supply; the plug must therefore be YOU MUST ENSURE THAT IT IS MADE easily accessible after installation. UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE. Positioning This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating
ページ16に含まれる内容の要旨
The plug moulded onto the lead incorporates a fuse. For replacement, use a 13amp BSI362 fuse. Only Electrical connections ASTA or BSI approved fuses should be used. Any electrical work required to install this appliance The plug must not be used if the fuse cover/carrier is should be carried out by a qualified electrician or lost. The cover/carrier is indicated by the coloured competent person. insert at the base of the plug. WARNING:THIS APPLIANCE MUST BE A replacement cover/carrier must be obt
ページ17に含まれる内容の要旨
! POSITIONING Height adjustment The height of the appliance is adjustable from 820 to 870 mm to line up with existing kitchen units. Before installing the appliance between units, adjust the height of the feet and rear wheels. The wheels are factory set for a height of 820 mm. To align the appliance to a height of 870 mm, raise it by adjusting the feet with a spanner, then remove the wheels and refit them in the lowest position.
# Fitting the side panels
ページ18に含まれる内容の要旨
$ Building the appliance in The top of the appliance must be kept clear to allow correct air circulation. If a wall unit is fitted above the appliance, there must be a gap of 50 mm between this unit and the wall and it must be at least 50 mm below the ceiling. Fitting the plinth Alignment height of 820 mm If using a 140 to 170 mm plinth, make a cut-out as shown. ! $ If using a plinth higher than 100 mm but less than 140 mm, cut the height compensation s
ページ19に含まれる内容の要旨
If using a 100 mm plinth, fit the complete height compensation strip. Alignment height of 870 mm If using a 190 to 220 mm plinth, make a cut-out as shown. If using a plinth higher than 150 mm but less than 190 mm, cut the height compensation strip supplied with the appliance to the required depth and fit it between the plinth and the ventilation grill. If using a 150 mm plinth, fit the complete height compensation strip. If the appliance is installed at the end of a row
ページ20に含まれる内容の要旨
© Electrolux plc 2004
