ページ1に含まれる内容の要旨
Module No. 2030
2030-1
GETTING ACQUAINTED TIMEKEEPING MODE
Congratulations upon your selection of this CASIO watch. To get the most out In addition to normal timekeeping, use the
Moon phase indicator
of your purchase, be sure to read this manual carefully and keep it on hand Timekeeping Mode to set the current time and
for later reference when necessary. date.
Day of week
• The Moon phase indicator shows the
Tide graph
Warning! current Moon phase for the currently
• The measurement functio
ページ2に含まれる内容の要旨
2030-2 • “Thermo Scanner Mode” provides important precautions and other Setting the Longitude and Lunitidal Interval supplementary information about taking measurements with the Thermo • The lunitidal interval is the time elapsing between the Moon’s transit over Scanner. the meridian and the next high tide. See “Lunitidal Interval” for more information. • This watch displays lunitidal intervals in terms of hours and minutes. Checking the Current Emissivity Setting In the Thermo Scanner Mode, hol
ページ3に含まれる内容の要旨
2030-3 6. Press C to move the flashing to the first Viewing the Moon Age for a Particular Date Site name character of the site name. 1. In the Moon Data Mode, press A to 7. Input the site name you want. Year Month – Day display the Moon Age Screen. • Use D and B to cycle through characters • The initial default date for the Moon Age at the current input position in the sequence Screen when you enter the Moon Data shown below. Mode is the current date as kept in the Press D. Press B. Timekeeping
ページ4に含まれる内容の要旨
2030-4 • The left-right orientation of the Moon phase is reversed when viewing from BACKLIGHT the Southern Hemisphere or from a point near the equator. • The Moon phase indicator displayed in the Timekeeping Mode and Alarm The backlight uses an EL (electro-luminescent) Mode is based on Timekeeping Mode (home site) data. The indicator panel that causes the entire display to glow for displayed in the Site Mode and Moon Data Mode is based on data for the easy reading in the dark. The watch’s auto l
ページ5に含まれる内容の要旨
2030-5 Measurement Range Site Mode The area measured by the Thermo Scanner increases the further you are • The current time in all Site Mode sites is calculated in accordance with the from the object. Make sure you are close enough to the object so the area Greenwich Mean Time (GMT) differential for each site, based on the measured remains within the surface area of the object. current time setting in the Timekeeping Mode. Also, remember that the temperature value displayed by the watch is the •
ページ6に含まれる内容の要旨
2030-6 Troubleshooting PRE-PROGRAMMED SITE DATA ERR. ERR. ERR. ERR. ERR. Messages GMT Lunitidal The following shows the error messages that can appear and what you need Site Name Location Longitude Differential Interval to do to correct the situation. TOKYO Tokyo 140°E +9.0 5:20 Error Meaning Cause What to do PALAU Palau 134°E +9.0 7:30 Message ERR. Overheat Watch temperature Keep watch out or direct GUAM Guam 145°E +10.0 7:40 NO. 1 error is outside the range sunlight and other areas where GBR G
ページ7に含まれる内容の要旨
Paper Cloth (Black) Plastics Asphalt Sand Charcoal Bricks Concrete Pottery Ceramics Oil Water Stainless steel Snow Ice Polished Oxidized Aluminum Glass Plants Oxidized Polished Rubber Iron Ground Wood Skin 2030-7 EMISSIVITY VALUES Objects Blackbody 1.00 0.95 0.90 0.85 0.80 0.75 0.70 0.65 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 Emissivity
