ページ1に含まれる内容の要旨
OWNER'S MANUAL
I:RItFTSMnN
®
6.0 Horsepower
2350 PSI 2.2 GPM
High Pressure Washer
Model No:
919.762350
• Safety
• Assembly
WARNING: Before using this
• Operation
product, read this manual
CUSTOMER
and follow all Safety Rules
• Maintenance
HELPLINE
and Operating Instructions.
• Parts List
• EspaSol
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
18478 MGP-?62350A 41t/98
ページ2に含まれる内容の要旨
TABLE OF CONTENTS Warranty ............................................ 2 Service and Adjustments ................ 13-14 Safety Guidelines .............................. 3-5 Storage ................................................. 14 Assembly .......................................... 5-7 Troubleshooting .................................... 15 Parts ................................................ 16-27 Operation .......................................... 7-10 Maintenance ......................
ページ3に含まれる内容の要旨
SAFETY GUIDELINES - DEFINITIONS This manual containsinformationthat is importantfor youto know and understand. This informationrelatesto protesting YOUR SAFETYand PREVENTING EQUIPMENT PROBLEMS. Tohelpyou recognizethisinformation, we usethe symbols below. Pleasereadthe manualandpay attentionto thesesections.SAVETHESE DEFINITIONS/INSTRUCTIONS. •& WARNING indicates a potentially hazardous situation which, if not avoided, _couldresult in death or set ous in" , CAUTION indicates a potentially hazardo
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS (cont'd) HAZARD WHAT CAN HAPPEN HOW TO PREVENT IT • Unsafe operation of your pressure • Become famiUar with the operation and controls of the pressure washer. washer could lead to serious injury RISK OF UNSAFE or death to you or others. • Keep children away from the OPERATION • The spray gun/wand is a powerful pressure washer at all times. cleaning tool that could look like a • Never defeat the safety features of this toy to a child. product. • Do not operate machin
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS (cont'd) HAZARD WHAT CAN HAPPEN HOW TO PREVENT IT * Contact with hot surfaces, such as • During operation, touch only the control engines exhaust components, could surfaces of the pressure washer. Keep RISK OF HOT SURFACES result in serious burn. children away from the pressure washer at all times. They may not be able to recognize the hazards of this product. Symbols Owner's Manual I_e_I Choke IMPORTANT: The powerful spray from your pressure washer is capable of ca
ページ6に含まれる内容の要旨
3. • Mount the rubber isolator to the frame. To mount Tools Required for Assembly isolator place threaded end of bolt through the Adjustable wrench washer. Next with washer on boIt place threaded Allen wrench 5ram (included) end of bolt through the larger hole in bottom of the rubber isolator. Place threaded portion of bolt Remove Pressure Washer from Carton through the same hole location the wood plank was mounted to on the pressure washer. Next • Open box from the top. Locate and remove from p
ページ7に含まれる内容の要旨
7. • Place assembled gun and wand on pressure - Lift the pull cord handle up and slide the cord to washer holder. the left sliding the cord into the wire loop. - Next slide handle behind the wire bracket to the left of the wire loop. - Engine recoil will pull the cord into its final position. Checklist Before going any further please review the following: • Be sure you have completed assembly instructions. • Double check allfittings to be sure they are tight. 8. • Place pull cord into the wire b
ページ8に含まれる内容の要旨
BEFORE STARTING THE ENGINE _, arning: Read Owner's Manual. Do not attempt To operate the engine you will need to do the to operate equipment until you have read Owners following. Manual for Safety, Operation, and Maintenance Instructions. NOTE: Your pressure washer pump is a sealed pump you should never have to add or change the oil Note: Included with your unit is a video cassette that demonstrates how to operate your pressure washer. If you have a video cassette recorder you should every start
ページ9に含まれる内容の要旨
Use clean, fresh, regular unleaded gasoline with a • Squeeze trigger on pressure washer wand to relieve minimum of 85 octane. Do not mix oil with gasoline. If air pressure caused by turning on the water. Water unleaded fuel is unavailable leaded fuel may be used. will spew out of the gun in a thin stream. This will make it easier to start the engine. IMPORTANT: It is important to prevent gum deposits • Engage the safety latch on the spray gun. This locks from forming in essential fuel system par
ページ10に含まれる内容の要旨
How To Use Your Pressure Washer Using Soaps/Chemicals IMPORTANT: Use soaps and chemicals that are On the end of your spray gun is a nozzle that you can slide forward and backward and that you can also designed specifically for use with pressure washers. To twist from side to side. With the adjustable nozzle you apply soaps/chemicals follow these steps: can adjust the spray pattern to either high pressure • Prepal;e'the soap/chemical as required by your job. or low pressure. You can also adjust t
ページ11に含まれる内容の要旨
• Afterusing the pressure washer, you should flush clear water° To do so, simply place chemical injector the pump, chemical injector and chemical line with hose in water and siphon for 1 to 2 minutes. CUSTC)MER _BlUTIES TABLE Every25 Every50 Every 100 Beforeeachuse hoLrscr yeady lhours oryearly MAi_ TASK hoursoryeady PRESSURE WASHER Checlddean inletscreer_ x X Check p ssure hose. x Checksoapandchernic_hoseandfilter x Check gun and wand for le_s. X PurgepLrnpof ar andcor_arrinants ENGINE Chag_eng
ページ12に含まれる内容の要旨
Pressure Washer Maintenance Change Engine Oil Check and Clean Inlet Soreen: Examine inlet screen • Change oll w_lle engine is still warm. Preferably on pump inlet fitting. Clean if clogged; replace if torn. drain oil from top of engine as illustrated below. Drain oil with air cleaner side up. Oil can be drained Check High Pressure Hose: High pressure hose can from engine bottom if necessary. develop leaks from wear, kinking, abuse. Inspect hose each time before use. Check for cuts, leaks, abrasi
ページ13に含まれる内容の要旨
Service Air Cleaner • Do not clean engine with a forceful spray of water because water could contaminate fuel system. Your engine is equipped with an oval dual element. With a brush or cloth, clean finger guard after every use to prevent engine damage caused by overheating. • To service element: loosen screws and lift cover. Then carefully remove pre-cleaner and cartridge CLEAN assembly. • After servicing pre-cleaner and cartridge, place pre-cleaner on cartridge. CLEAN_ • Install air cleaner ass
ページ14に含まれる内容の要旨
9. Reconnect wand/lance to gun and turn on water 3. Pull trigger on gun handle to relieve any water supply. pressure. 10. Start pressure washer and place wand/lance into 4. Disconnect the wand/lance from the gun. highpressure setting to test. 5. Remove the nozzle from the end of the wand with the 2mm allen wrench provided. 6. Clean the nozzle using the nozzle cleaner provided or a straightened paper clip. Insert into the nozzle end and work back and forth until obstruction is removed. (_---,==-
ページ15に含まれる内容の要旨
SYMPTOM CAUSE SOLUTION 1. Engine throttle is in "OFF" Position. Engine won't 1. Slide throttle to "Rabbit" position, start 2. Choke lever has not been placed to 2. Slide choke lever to choke position. choke. 3. Pressure buildup after initialuse. 3. Depress trigger gun. 1. Won't Draw Nozzle not in chemical draw position. 1. Place nozzlsto low pressure_ Chemical 2. Chemical screen is obstructed. 2. Check chemical screen;clean if obstructed. 3. Chemical screen not working. 3. Make sure chemical scr
ページ16に含まれる内容の要旨
CRAFTSMAN 2350 PSi HIGH PRESSURE WASHER 919362350 16 11 900 I 5 22 20 21 REF NO. PART NO. DESCRIPTION REF NO. PART NO. DESCRIPTION 1 16469 Handle 21 16829 Garden Hose Adapter 1/2" 2 16471 Knob - 5/16" 22 F504W 3/8" Coupling 3 Gun 16468 23 Fl12 Washer 4 16466 Tire Semi (7 x I 3/4) 5 W137 Nut Pal 1/2" 6 "t6371 Foot Rubber, Hollow 7 W131 Tee Nut 5/160" x 3/4" PART_, NOT ILLUSTRATED 6 16462 Frame 10 H140 Hose, Chemical MGP-762350A Owner's Manual !1 16491 Lance, Multi-Reg NCT001 Nozzle Cleaning Kit 1
ページ17に含まれる内容の要旨
CRAFTSMAN 2350PSlHIGHPRESSURE WASHER 919.762350 PUMP BREAKDOWN MODEL PK16482 21 ....... J 38 "_. B m 17
ページ18に含まれる内容の要旨
CRAFTSMAN 2350 PSI HIGH PRESSURE WASHER 919.762350 PUMP BREAKDOWN MODEL PK16482 REF. PART PER PART NO. NO. DESCRIPTION QTY. NO. NO, DESCRIPTION QTY, 1 AR-1322520 Knob 1 37 _ AR-1200690 O-Ring 1 2 AR-1980300 Nut 1 38 AR-1270130 Detergent injector 1 40 AR-1980190 Support ring 3 3 AR-1980470 Grub screw 1 41 AR-1342761 Gasket 3 4 AR-1980640 Handle insert 1 5 AR-1080070 Pin 1 42 AR-1980180 Piston guide 3 43 AR-770130 O-Ring 3 6 AR-1980220 Plate spring 1 44 AR-1260440 Gasket 3 7 AR-1271070 Spring 1 45
ページ19に含まれる内容の要旨
CRAFTSMAN 2350 PSi HiGH PRESSURE WASHER 919.762350 BRIGGS ENGINE MODEL #121602-0206-EI 307 1029 189 REF. PART REF. PART REF. PART NO. NO. NO. DESCRIPTION NO, DESCRIPTION NO. NO. DESCRIPTION 122 635 66538 1 499678 Cylinder Assembly 281617 Spacer-Carburetor Root-Spark Plug 155 7!8 230192 Dowel-Sleeve 3 399269 Bushing 225325 Plate-Cylinder Head 5 299819 Seal-Oil 189 263108 Ball-Rocker Arm 830 499756 Stud-Rocker Arm 238 868 498592 Seal-Valve 6 499643 Head-Cylinder 253131 Cap-Valve 305 94744 Screw-He
ページ20に含まれる内容の要旨
CRAFTSMAN 2350PSIHIGHPRESSURE WASHER 919.762350 BRIGGS ENGINE MODEL #121602-0206-E1 284 _ 24 11si 525 116A_ REF. PART REF. PART REF. PART DESCRIPTION NO. NO, DESCRIPTION NO. NO. DESCRIPTION NO. NO. 284 94511 Straw-Shoulder 24 222698 Key-Flywheel 4 499619 Sump-Engine 523 499621 Dipstick 25 499627 Piston Assembly 12 272198 Gasket-Crankcase 495265 Tube-OlIFlll 525 15 94880 26 499631 Ring Set Plug-Oil Drain 562 94907 Bolt-Governor Lever 27 263190 Lock-Piston Pin 16 498615 Crankshaft 592 231082 Nut-H
