ページ1に含まれる内容の要旨
BLACK NICKEL
1/4" AIR ANGLE DIE GRINDER
USER’S MANUAL
WARNING:
Read carefully and understand all INSTRUCTIONS before
operating. Failure to follow the safety rules and other basic
safety precautions may result in serious personal injury.
Item #120206
Page: 1 of 7
ページ2に含まれる内容の要旨
For technical questions and replacement parts, please call 1-800-222-5381. Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC. Product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applica
ページ3に含まれる内容の要旨
Read and understand all instructions. Failure to follow all instructions listed in the following pages may result in electric shock, fire, and/or serious injury. Work Area 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2. Do not operate pneumatic tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Pneumatic tools create sparks which may ignite flammables. 3. Keep bystanders, children and pets aw
ページ4に含まれる内容の要旨
7. Check for misalignment or binding of moving parts, breakages of parts, damaged air hose (not included), and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. 8. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. Service 1. Tool service must be performed
ページ5に含まれる内容の要旨
Fig. 1 To Operate as a 1/4" Die Grinder: 1. Always wear ANSI-approved safety glasses, a full face shield, and hearing protection when operating the tool. 2. Use the two wrenches provided to loosen the collet nut. 3. Insert the 1/4" diameter shank of a grinding drum (not included) fully into the collet. Then, firmly re-tighten the collet nut to lock both the collet and grinding drum in place. 4. Connect the air supply hose to the quick-connector on the Die Grinder. Turn on the air com
ページ6に含まれる内容の要旨
INSPECTION, MAINTENANCE AND CLEANING 1. Always make sure the trigger is in its “OFF” position, and disconnect the Die Grinder from its compressed air supply before performing any inspection, adjustments, maintenance, or cleaning. 2. Before each use, inspect the general condition of the Die Grinder. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged air hose, and any other condition that may affect its safe operation. If abnormal noise or vibra
ページ7に含まれる内容の要旨
Part# Description Qty. Part# Description Qty. 1 Housing 1 18 Air Inlet 1 2 Valve Bushing 1 19 Washer 1 3 Valve Stem 1 20 Collet Holder 1 4 Trigger 1 21 Collet 1 5 Air Regulator 1 22 Cap 1 6 Pin 1 23 Retainer 1 7 Valve Plug 1 24 Housing Cap 1 8 O-ring 1 25 Muffle Cover 1 9 End Plate 1 26 Wrench 1 10 Bearing 1 27 Wrench 1 11 Steel Ball 1 28 O-ring 1 12 Rotor 1 29 O-ring 1 13 Rotor Blade 1 30 Spring 1 14 Cylinder 1 31 Pin 1 15 Front Plate 1 32 Lever 1 16 Beari
