ページ1に含まれる内容の要旨
P3PC-E807-01ENC2
FUJITSU TWAIN 32 Scanner Driver
® ®
Scanner Utility for Microsoft Windows
Version 9.12
User's Guide
® ® ® ®
For Use with Microsoft Windows 98, Windows Me, Windows 2000
®
and Windows XP
® ®,
(* For Windows 95 and Windows NT 4.0, refer to Version 8.12 User’s Guide.)
ページ2に含まれる内容の要旨
Introduction ® ® Thank you for purchasing the "Scanner Utility for Microsoft Windows V9.12". This software contains a TWAIN-compliant image scanner driver (simply called "driver" in this guide) and utilities. This guide provides a description summary of the driver, as well as a description of the installation method and procedures for appropriate use. Please read this guide before starting to use the software. In addition, read the README.TXT file on the CD-ROM for the latest information
ページ3に含まれる内容の要旨
Trademarks Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. Intel, MMX, Pentium are registered trademarks of Intel Corporation. Adobe, Acrobat are the trademarks or registered trademarks of Adobe Systems Incorporated. ISIS, QuickScan and their respective logos are registered trademarks of Pixel Translations, a division of Captiva Software Corporation in the United States. Adaptec is a registered trademark o
ページ4に含まれる内容の要旨
Organization This manual explains how to install and use this driver, and how to use the TWAIN scanning utility. • Installation This section explains the procedure for installing the environments in which this driver may operate. • Using the Driver This section explains how to use the driver. • Using the Gamma Pattern Editor Use of the Gamma Pattern Editor is explained • Using the Scanners and Cameras This section explains about the property of “Scanners and Cameras” • Troublesho
ページ5に含まれる内容の要旨
Contents 1. Outline .............................................................................................. 1 1.1 Characteristics of this Driver...........................................................................1 1.2 Operating Environment...................................................................................1 1.3 Explanatory Notes ..........................................................................................2 1.4 Explanation of terms...................
ページ6に含まれる内容の要旨
4.7.6 Filter.....................................................................................................................48 4.7.7 Compression........................................................................................................52 4.8 Setting Advance Options ..............................................................................53 4.8.1 Gray .....................................................................................................................5
ページ7に含まれる内容の要旨
7.2 Device Trouble Related to Operation..........................................................103 7.3 Device Trouble Related to Installation ........................................................104 8. Appendix ...................................................................................... 105 8.1 Relevant Image Scanner Specification.......................................................105 8.2 Maintenance Service ..................................................................
ページ8に含まれる内容の要旨
1. Outline 1.1 Characteristics of this Driver • This driver complies with TWAIN regulations V1.9 (the latest version as of April 2003), which are global standards for image scanners. The driver can be used in all TWAIN- compliant applications. • This driver also supports an image scanner that has the "double-sided scan" function. If the application supports continuous scan, a double-sided document can be scanned. 1.2 Operating Environment This driver can be used in the following syste
ページ9に含まれる内容の要旨
® ® − Microsoft Windows XP • USB port • RAM: 32 MB or more (a minimum of 64 MB is recommended) • Available hard disk space: 10 MB or more (excluding the area for storing images) • CD-ROM drive (required for installation) • Mouse (recommended) 1.3 Explanatory Notes The descriptions in this manual are prepared based on the following rules: ◊ Menus and buttons The menus and buttons used in the program description are enclosed in []. Example: [File] menu [OK] button ◊ Keyboard The ke
ページ10に含まれる内容の要旨
◊ Notes on operation procedures If some menus need to be operated in a certain order, the procedural order is described as follows: [A] - [B] - [C] In accordance with this description, operation [A] is executed first, followed by [B] and [C] in that order. ◊ Figures ® ® Figures and screen operations in this guide refer to Microsoft Windows 2000. They are also followed when using other operating systems. Note that the expressions may vary with the type of scanner connected. 1.4 Exp
ページ11に含まれる内容の要旨
2. TWAIN 2.1 TWAIN TWAIN is the specification that defines the standard software protocol and application programming interface (API) for data exchange between a software application program and an image input device such as the image scanner. [TWAIN development background] In the past, development of a new scanner inevitably required the development of a compatible driver and a sample (demonstration) program exclusively designed for the new scanner. As the scanner is upgraded, the dr
ページ12に含まれる内容の要旨
2.2 TWAIN Application TWAIN mainly applies to the following three software components: Application software Source manager Source The components are related to each other as shown below. Application software (photo retouching software, etc) Source manager (TWAIN.DLL/TWAIN_32.DLL, etc) Source (Image scanner control of the driver, etc) Image scanner, etc. Figure TWAIN Application 5
ページ13に含まれる内容の要旨
3. Installation 3.1 Preparation 1. Make sure that the operating system (OS) is installed correctly. 2. In case of the SCSI connection, confirm that the SCSI adapter is connected to your PC and operating correctly. In case of the USB connection, confirm that the USB port is installed in your PC. 3. Confirm that the hard disk that is the installation destination has enough free space. 4. If old version FUJITSU TWAIN 32 Driver has already been installed on your PC, uninstall it before insta
ページ14に含まれる内容の要旨
3.2 Installing the Scanner Driver ® The Windows XP screen samples are shown below. The screen and operations will differ slightly depending on the OS that is being used. 1. Turn on the scanner. ® 2. Turn on your PC and Log on to Windows . ® ® When using Windows 2000 or Windows XP, log on as an administrator. The scanner may be detected automatically, and the "Found New Hardware Wizard" (or “Add New Hardware Wizard”) window is displayed. In this case, click [Cancel] button to cl
ページ15に含まれる内容の要旨
® In case of Windows 2000 ® In case of Windows XP 3. Insert the Setup CD-ROM into the CD-ROM drive. is displayed. This Dialog is not displayed automatically when "Auto play" setting of your PC is off. In this case, please run “Install.exe” in this CD-ROM directly using “Explore” or “My computer”. 8
ページ16に含まれる内容の要旨
4. Click [INSTALL PRODUCTS]. (* Depending on the scanner model, the different screen may appear.) 5. Click [TWAIN Driver] (* Depending on the scanner model, the different screen may appear.) Depending on the scanner model, the screen which confirms whether “Error Recovery Guide” is installed or not is displayed. In this case, click [OK] button, and install Error Recovery Guide. 9
ページ17に含まれる内容の要旨
6. Select the language you use in [Choose Setup Language], then click [OK] button. 7. Click [Next >] button. 8. Read the information of README File, and then click [Next >] button. 10
ページ18に含まれる内容の要旨
9. Read the License Agreement carefully, and then click [Yes] button if you agree. If you click [No] button, the installation is stopped. 10. Confirm Destination Folder, and then click [Next >] button. Usually, it is not necessary to change Destination Folder. 11. Confirm Components you install, and then click [Next >] button. Usually, it is not necessary to change the selection of Components. 11
ページ19に含まれる内容の要旨
12. Confirm Program Folder, and then click [Next >] button. Usually, it is not necessary to change the Program Folder’s name. 13. Click [Next >] button, and copying files is started. 14. Select “Yes, I want to restart my computer now”, and then click [Finish] button. 15. After the restart, the scanner is detected. Depending on the OS, the following operations may be required. 12
ページ20に含まれる内容の要旨
® In case of Windows 98 ® There is a request to insert a disc. When this happens, insert the Windows 98 CD-ROM in your CD-ROM drive. ® In case of Windows 2000 [Digital Signature not Found] is displayed, click [Yes] button. ® In case of Windows XP 1) [Found New Hardware Wizard] is displayed, click [Next >] button. 2) If [Hardware Installation] is displayed, click [Continue Anyway] button. 3) Click [Finish] button when the installation is finished. 13
